Looking for a 1000w Power Supply

[ConduitCreator]

Hello! I'm interested in getting a new power supply for the possibility of an SLI config in the future (I know, I know, it's not worth it, I just want to keep my options open because I plan to have this PSU for 10+ years). I want to keep it at ~1000w for the future proofing. I've seen the PSU tier list, but I would like as much consultation as possible. Large factor for me would be quiet as possible cooling at medium loads. Money isn't a huge issue for me but I would prefer to keep it around ~$250 USD or less, however I would be willing to spend more if it's really enticing. 

 

1000w is overkill for the specs, I know, but I would rather pay more now for the possibility of expansion in the future. Specs are as follows:

 

CPU: Ryzen 7 3700x

Cooler: NH-D15s

GPU: Gigabyte RTX 2080 Super Gaming OC

RAM: G.skill (2x16gb) 3200 mhz

Storage: WD Blue 500gb SSD, Sabrent Rocket NVME PCIe 4.0 1tb 

Case: iCue 220t RGB (Really Great Benchmarks) 

PSU: EVGA B1 500w 80+ Bronze

 

Appreciate the help, hit me with as many questions as needed, better safe then sorry. 

 

[TheGlenlivet]

https://www.amazon.com/EVGA-SuperNOVA-Modular-Warranty-120-GP-1000-X1/dp/B0797D5WHH/ref=sr_1_2?keywords=1000w+psu&qid=1580317252&sr=8-2

or 

https://www.amazon.com/CORSAIR-RM1000i-Certified-Fully-Modular/dp/B00YPNSQRW/ref=sr_1_12?keywords=1000w+psu&qid=1580317329&refinements=p_89%3ACorsair&rnid=2528832011&sr=8-12

are my choices.

 

[FloRolf]

7 minutes ago, ConduitCreator said:

better safe then sorry

Yes, you're gonna be safe now with 1000w and sorry in 10years when you realized you didn't need it at all. 

 

Honestly, just get a bigger unit when you need it. The efficiency is worse when you run it now with low load and when you buy new in 5 years you're probably getting better Psu's too so I really wouldn't worry now. 

 

 

Edit: also, you won't get more consultation than the PSU Tier List. Just get the highest tier you can afford and you're good. 

[Fasauceome]

9 minutes ago, ConduitCreator said:

1000w is overkill for the specs, I know, but I would rather pay more now for the possibility of expansion in the future. Specs are as follows:

 

expansion to what exactly?

 

what is the most power hungry hardware you plan on getting

 

1000 watts is for something like a 32 core threadripper and dual 2080 ti or something

[GoldenLag]

16 minutes ago, ConduitCreator said:

Money isn't a huge issue for me but I would prefer to keep it around ~$250 USD or less, however I would be willing to spend more if it's really enticing. 

https://pcpartpicker.com/product/VqK7YJ/cooler-master-power-supply-rsc00afbag1us

 

Delta GM plattform if you for some ungodly reason want to spend that much on a PSU

 

https://pcpartpicker.com/product/n3rG3C/antec-power-supply-hcp1300platinum

 

or this thing i dont know the plattform of. 

 

 

but realistically 750w would serve you more than well, or in worst case 850w. say a Straight Power 11. 

[ConduitCreator]

5 minutes ago, Fasauceome said:

 

 

what is the most power hungry hardware you plan on getting

 

Considering I pretty frequently contract for studios, i'm looking at getting a 2990wx threadripper in the not-so-distant future. I've never made a dual GPU config so for my pure morbid curiosity I would look at doing a 2x 2080s SLI system, but that's by no means a necessity and just so I have an excuse to burn some money. Is it still overkill for a system like that? Or should I just get a cheaper one now and purchase in the future. Money isn't a huge problem for me but if I really don't need to spend it I won't. 

[WihGlah]

25 minutes ago, ConduitCreator said:

Hello! I'm interested in getting a new power supply for the possibility of an SLI config in the future (I know, I know, it's not worth it, I just want to keep my options open because I plan to have this PSU for 10+ years). I want to keep it at ~1000w for the future proofing. I've seen the PSU tier list, but I would like as much consultation as possible. Large factor for me would be quiet as possible cooling at medium loads. Money isn't a huge issue for me but I would prefer to keep it around ~$250 USD or less, however I would be willing to spend more if it's really enticing. 

 

1000w is overkill for the specs, I know, but I would rather pay more now for the possibility of expansion in the future. Specs are as follows:

 

CPU: Ryzen 7 3700x

Cooler: NH-D15s

GPU: Gigabyte RTX 2080 Super Gaming OC

RAM: G.skill (2x16gb) 3200 mhz

Storage: WD Blue 500gb SSD, Sabrent Rocket NVME PCIe 4.0 1tb 

Case: iCue 220t RGB (Really Great Benchmarks) 

PSU: EVGA B1 500w 80+ Bronze

 

Appreciate the help, hit me with as many questions as needed, better safe then sorry. 

 

Prepare for the haters.....

 

I never understood the "all you need is a 360 watt bronze" mentality. I spent over $750 on water cooling fittings, nobody "needs" them either.

 

FWIW, anything Platinum / Titanium rated at 1000w is going to be amazing.

[Mateyyy]

750-850W would be more than enough for SLI. 

My picks would be Corsair's HXi or be quiet's Straight Power or Dark Power Pro.

[ConduitCreator]

2 minutes ago, GoldenLag said:

https://pcpartpicker.com/product/VqK7YJ/cooler-master-power-supply-rsc00afbag1us

 

Delta GM plattform if you for some ungodly reason want to spend that much on a PSU

 

https://pcpartpicker.com/product/n3rG3C/antec-power-supply-hcp1300platinum

 

or this thing i dont know the plattform of. 

 

 

but realistically 750w would serve you more than well, or in worst case 850w. say a Straight Power 11. 

That Antec looks like an excellent value. I know I could probably get away with a 750 or 850 but I want the possibility for an Threadripper expansion so there's that. This is an excellent suggestion thanks.

[GoldenLag]

8 minutes ago, ConduitCreator said:

i'm looking at getting a 2990wx threadripper in the not-so-distant future. I've never made a dual GPU config so for my pure morbid curiosity I would look at doing a 2x 2080s SLI system,

at that point a Delta GM like the V1200 i linked or Antec HCP would be more than adequate and more or less the best you can get for the money

 

Edit: also dont get a 2990wx due to the new 3rd gen threadripper parts. Especially for your workload.

[Fasauceome]

3 minutes ago, ConduitCreator said:

Considering I pretty frequently contract for studios, i'm looking at getting a 2990wx threadripper in the not-so-distant future. I've never made a dual GPU config so for my pure morbid curiosity I would look at doing a 2x 2080s SLI system, but that's by no means a necessity and just so I have an excuse to burn some money. Is it still overkill for a system like that? Or should I just get a cheaper one now and purchase in the future. Money isn't a huge problem for me but if I really don't need to spend it I won't. 

in that case, a 1000W or even 1200W PSU is certainly reasonable. Those 32 cores can exceed 500 watts by themselves.

[ConduitCreator]

1 minute ago, Fasauceome said:

in that case, a 1000W or even 1200W PSU is certainly reasonable.

Maybe this is just me being paranoid but I also want to be prepared for any future GPU/CPU releases I may be interested in because I build pretty frequently. I've always been somewhat knowledgeable about PC parts but I've never built a really high wattage system like what i'm suggesting. Usually I just throw in a 650w Gold and call it a day but it gets way more complex than I thought. But even for a threadripper system 1000w seems like more than enough in this regard. The SLI is just an afterthought to me because a single 2080 is more than enough for me. 

[Fasauceome]

Just now, ConduitCreator said:

I also want to be prepared for any future GPU/CPU releases I may be interested in because I build pretty frequently

in that case, you'll want a third gen threadripper. first and second gen is not compatible with the same boards.

 

1 minute ago, ConduitCreator said:

But even for a threadripper system 1000w seems like more than enough in this regard. The SLI is just an afterthought to me because a single 2080 is more than enough for me. 

targeting a single 2080 super and a 32 core CPU, anything in the 850 to 1000 watt range would suffice. Of course, AMD does plan on releasing a 64 core CPU for this current threadripper socket so if you wanted to salivate over that a little, the extra PSU headroom would make sense.

[ConduitCreator]

9 minutes ago, WihGlah said:

Prepare for the haters.....

 

I never understood the "all you need is a 360 watt bronze" mentality. I spent over $750 on water cooling fittings, nobody "needs" them either.

 

FWIW, anything Platinum / Titanium rated at 1000w is going to be amazing.

I know the jump from Gold to Platinum is a lot less meaningful than Bronze to Gold, even more so the jump from Platinum to Titanium. I think i'll go with Platinum is good for me at least.

[ConduitCreator]

1 minute ago, Fasauceome said:

in that case, you'll want a third gen threadripper. first and second gen is not compatible with the same boards.

 

targeting a single 2080 super and a 32 core CPU, anything in the 850 to 1000 watt range would suffice. Of course, AMD does plan on releasing a 64 core CPU for this current threadripper socket so if you wanted to salivate over that a little, the extra PSU headroom would make sense.

I am a bit paranoid that newer gen stuff will consume a lot more power than before (I know that doesn't logically make a lot of sense, but you never know). I gave you the wrong threadripper like the dumbass I am, I would definitely get a third gen over a first or second. This is probably a year down the line so I don't know what will be anounced/released in the meantime, hence my paranoia about how much power I really need. I'll most likely get a 1000w and worst case scenario I can purchase a bigger one in the future if need be. I can always use an extra power supply regardless. Got any opinions on good ones in the 1000w range, or should I just consult the list?

[Fasauceome]

2 minutes ago, ConduitCreator said:

I am a bit paranoid that newer gen stuff will consume a lot more power than before (I know that doesn't logically make a lot of sense, but you never know). I gave you the wrong threadripper like the dumbass I am, I would definitely get a third gen over a first or second. This is probably a year down the line so I don't know what will be anounced/released in the meantime, hence my paranoia about how much power I really need. I'll most likely get a 1000w and worst case scenario I can purchase a bigger one in the future if need be. I can always use an extra power supply regardless. Got any opinions on good ones in the 1000w range, or should I just consult the list?

well I usually consult the list myself so yeah go for it

The Corsair HX platinum is a great choice given the $250 budget you listed, and the 1200 watt model is only a few more bucks than the 1000 watt model

[ConduitCreator]

10 minutes ago, Fasauceome said:

well I usually consult the list myself so yeah go for it

The Corsair HX platinum is a great choice given the $250 budget you listed, and the 1200 watt model is only a few more bucks than the 1000 watt model

You're a beast for helping me out. Those seem like really great options, is there any genuine benefit to spending more than $250 other than the titanium rating? I also saw this https://pcpartpicker.com/product/n3rG3C/antec-power-supply-hcp1300platinum which seems really nice but I have to idea what the reputation or build quality is. I know you must be busy so sorry for all the questions. 

[ConduitCreator]

25 minutes ago, GoldenLag said:

at that point a Delta GM like the V1200 i linked or Antec HCP would be more than adequate and more or less the best you can get for the money

 

Edit: also dont get a 2990wx due to the new 3rd gen threadripper parts. Especially for your workload.

Yeah I misquoted I meant the thrid gen that's my bad.

[ConduitCreator]

27 minutes ago, Mateyyy said:

750-850W would be more than enough for SLI. 

My picks would be Corsair's HXi or be quiet's Straight Power or Dark Power Pro.

I also forgot to mention i'm interested in posiibly powering a threadripper so I have to consider that as well.

[ConduitCreator]

46 minutes ago, FloRolf said:

Yes, you're gonna be safe now with 1000w and sorry in 10years when you realized you didn't need it at all. 

 

Honestly, just get a bigger unit when you need it. The efficiency is worse when you run it now with low load and when you buy new in 5 years you're probably getting better Psu's too so I really wouldn't worry now. 

 

 

Edit: also, you won't get more consultation than the PSU Tier List. Just get the highest tier you can afford and you're good. 

The reason I'm going overkill is the possibility of getting a threadripper in the future. 

[ConduitCreator]

47 minutes ago, TheGlenlivet said:

https://www.amazon.com/EVGA-SuperNOVA-Modular-Warranty-120-GP-1000-X1/dp/B0797D5WHH/ref=sr_1_2?keywords=1000w+psu&qid=1580317252&sr=8-2

or 

https://www.amazon.com/CORSAIR-RM1000i-Certified-Fully-Modular/dp/B00YPNSQRW/ref=sr_1_12?keywords=1000w+psu&qid=1580317329&refinements=p_89%3ACorsair&rnid=2528832011&sr=8-12

are my choices.

 

Those are amazing thank you!

[Fasauceome]

7 minutes ago, ConduitCreator said:

is there any genuine benefit to spending more than $250 other than the titanium rating?

well the quality of a PSU extends beyond the rating, the power delivery of the HX series should be top notch.

 

specifically, its multi rail setup is good for your potential SLI goals.

[GoldenLag]

5 minutes ago, ConduitCreator said:

Those are amazing thank you!

Wouldnt get the P2 as its a singlerail. Not great at these higher wattages. 

[Guest]

32 minutes ago, Fasauceome said:

in that case, a 1000W or even 1200W PSU is certainly reasonable. Those 32 cores can exceed 500 watts by themselves.

Yes. Yes they can.

Had a lot of fun doing that.

 

 

This was benchmarking with it OC'd and just one 2080 Ti.

Mind you this is purely synthetic and OP will probably never do this.

[Fasauceome]

1 minute ago, Den-Fi said:

Mind you this is purely synthetic and OP will probably never do this

to be fair, a lot of professional workloads that involve rendering do rather closely resemble synthetic stress tests in their usage, so I don't think it's too unrealistic.