Jump to content

help me choose custom curve for 1660 Ti OC Strix?

frozensun
By frozensun
in Graphics Cards
 Share
Posted

Guys since the card has buzzing fan sound,probably lowering the fan speed could help to with the sound.

I don't have an idea how to setup custom curve for this card since highest temp is 52 C under full load,and fans work at around 1200 rpm...

So please give me an idea how would you setup fan curve on this model

 

 

Please do not take offence for my apparent confusion or rudeness,it's not intent me to be like that,it's just my BPD,be nice to me,and I'll return twice better,be rude and usually I get easly pissed of...I'll try to help anyone here,as long as it's something I dealt with,and even if you think I'm rude or not polite,forgive me,  it's not me it's my BPD.

Thanks for understanding.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Software like Afterburner can set custom fan curve

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
3 minutes ago, Jurrunio said:

Software like Afterburner can set custom fan curve

I know,how would you set it up, temp--->fan speed in %

 

Please do not take offence for my apparent confusion or rudeness,it's not intent me to be like that,it's just my BPD,be nice to me,and I'll return twice better,be rude and usually I get easly pissed of...I'll try to help anyone here,as long as it's something I dealt with,and even if you think I'm rude or not polite,forgive me,  it's not me it's my BPD.

Thanks for understanding.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, frozensun said:

I know,how would you set it up, temp--->fan speed in %

It’s entirely up to you. Do you prefer quieter system with a bit more heat? Or completely opposite to that. Fans on my gpu doesn’t turn on until card hits 65c 

   @Whiro tag or quote will do the trick 
i5 3570K @ 4.7Ghz  |  AsRock Fatal1ty Z77 Performance  |  Corsair Vengeance 16GB 1600MHz  |  ASUS Strix GTX 970 OC  |  Phanteks P400S TG  (mesh panel) |  EVGA 500W1  |  Storage: Corsair 60GB SSD (boot), Gigabyte 120GB SSD, WD 2Tb HDD | Cooling: Custom loop

                EKWB EK-XRES 140 Revo D5 RGB PWM

                EKWB EK Supremacy Evo , naked die

                EKWB EK Thermosphere 

                EKWB EK CoolStream PE 360

                EKWB EK Coolstream SE 120

                EKWB EK Vardar 120s  x6

                EKWB EK STC Classic 10/16  x10

                EKWB EK DuraClear Tubing 16/10

                EKWB EK CryoFuel Acid Green


Laptop: Gigabyte G5-KC | i5 10500H | RTX 3060

                                          WHIRO

         THE FIRST OF DEATH AND DARKNESS

 

        He feast on the dead to inherit their power

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
9 minutes ago, frozensun said:

I know,how would you set it up, temp--->fan speed in %

Just pull it lower, so higher temps at lower %

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
7 minutes ago, Whiro said:

It’s entirely up to you. Do you prefer quieter system with a bit more heat? Or completely opposite to that. Fans on my gpu doesn’t turn on until card hits 65c 

Yes,more heat,but lower fan speeds,so how would you set it up?

I don't mind card reaching 60 C and above...

 

Please do not take offence for my apparent confusion or rudeness,it's not intent me to be like that,it's just my BPD,be nice to me,and I'll return twice better,be rude and usually I get easly pissed of...I'll try to help anyone here,as long as it's something I dealt with,and even if you think I'm rude or not polite,forgive me,  it's not me it's my BPD.

Thanks for understanding.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, frozensun said:

Yes,more heat,but lower fan speeds,so how would you set it up?

I don't mind card reaching 60 C and above...

Can’t check it right now but quick google search and found this ?

 

D0768E15-50DE-4273-B23E-970078F4146E.jpeg

   @Whiro tag or quote will do the trick 
i5 3570K @ 4.7Ghz  |  AsRock Fatal1ty Z77 Performance  |  Corsair Vengeance 16GB 1600MHz  |  ASUS Strix GTX 970 OC  |  Phanteks P400S TG  (mesh panel) |  EVGA 500W1  |  Storage: Corsair 60GB SSD (boot), Gigabyte 120GB SSD, WD 2Tb HDD | Cooling: Custom loop

                EKWB EK-XRES 140 Revo D5 RGB PWM

                EKWB EK Supremacy Evo , naked die

                EKWB EK Thermosphere 

                EKWB EK CoolStream PE 360

                EKWB EK Coolstream SE 120

                EKWB EK Vardar 120s  x6

                EKWB EK STC Classic 10/16  x10

                EKWB EK DuraClear Tubing 16/10

                EKWB EK CryoFuel Acid Green


Laptop: Gigabyte G5-KC | i5 10500H | RTX 3060

                                          WHIRO

         THE FIRST OF DEATH AND DARKNESS

 

        He feast on the dead to inherit their power

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Whiro said:

Can’t check it right now but quick google search and found this ?

 

D0768E15-50DE-4273-B23E-970078F4146E.jpeg

hmm 50 % fan speed at 60 C is too much I think,fans would be loud,and no point at settings fan speed at 70 C and above maybe,I don't think this gpu will ever reach that temperature...is this for 1660 Ti?

 

Please do not take offence for my apparent confusion or rudeness,it's not intent me to be like that,it's just my BPD,be nice to me,and I'll return twice better,be rude and usually I get easly pissed of...I'll try to help anyone here,as long as it's something I dealt with,and even if you think I'm rude or not polite,forgive me,  it's not me it's my BPD.

Thanks for understanding.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
3 minutes ago, frozensun said:

hmm 50 % fan speed at 60 C is too much I think,fans would be loud,and no point at settings fan speed at 70 C and above maybe,I don't think this gpu will ever reach that temperature...is this for 1660 Ti?

No it’s just general pic from google. Best way what you can do is test it yourself at what % fans start to be annoying. Just have a bit of play with it

   @Whiro tag or quote will do the trick 
i5 3570K @ 4.7Ghz  |  AsRock Fatal1ty Z77 Performance  |  Corsair Vengeance 16GB 1600MHz  |  ASUS Strix GTX 970 OC  |  Phanteks P400S TG  (mesh panel) |  EVGA 500W1  |  Storage: Corsair 60GB SSD (boot), Gigabyte 120GB SSD, WD 2Tb HDD | Cooling: Custom loop

                EKWB EK-XRES 140 Revo D5 RGB PWM

                EKWB EK Supremacy Evo , naked die

                EKWB EK Thermosphere 

                EKWB EK CoolStream PE 360

                EKWB EK Coolstream SE 120

                EKWB EK Vardar 120s  x6

                EKWB EK STC Classic 10/16  x10

                EKWB EK DuraClear Tubing 16/10

                EKWB EK CryoFuel Acid Green


Laptop: Gigabyte G5-KC | i5 10500H | RTX 3060

                                          WHIRO

         THE FIRST OF DEATH AND DARKNESS

 

        He feast on the dead to inherit their power

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×