Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
neoplefuckedup

Asus Strix 2070 Super stuck @ 0.7 Voltage with huge fps loss! Need Your Help!

Recommended Posts

Posted · Original PosterOP

Just brought a 2070 super asus strix rog few days ago, I found max fps is much lower than it should be.

here is my rig

asus strix 2070 super, switch in on left, perfomance mode

2700x @ 4.0 all cores 24/7

x470 prime pro bios 1004

8gx2 ddr 3000mhz set in dual channel

only 1 old blue 1T HDD

550W Gold plus PSU from superflower, SF-550P14XE (+12V 45.5A)

side glass of computer case is opened for better cooling and provide some heat for Canada winter as well.

OS: windows 7 sp1, Nvidia driver 441.20 fresh installed via DDU

Power plan in nvidia panel and windows panel both has been optimized. (has been set as "prefer performance")

get like max 70fps in valley benchmark1.0 basic, ultra setting @ 1080p, no AA enabled.

get 20fps in towns of the outer world no matter low or high settings

80fps in tspawn of csgo train map, everything low at 1080p 144hz

in games it constantly drawing 0.72V no matter what, graph of GPU voltage on msiafterburner is flat as hell.

should I get some device to check plugs in my room/ breaker for output limit as well?

 

 

 

Afterburner OC test

04:52:37 Connected to MSI Afterburner control interface v2.3

04:52:40 GPU1 : VEN_10DE&DEV_1E84&SUBSYS_87281043&REV_A1&BUS_10&DEV_0&FN_0

04:52:41 Core clock +0MHz

04:52:41 Start testing, please wait a few minutes

04:57:44 Test completed, confidence level is 90%

 

 

ffurmark_test.PNG

val.PNG

Link to post
Share on other sites

Sticking to base clock, sign of corrupted bios on the card. RMA is the best way to solve it.


CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites

was it not an issue that a few youtubers had.. Gamers Nexus talked a lot about bios being stuck..

 

personally i would just update the bios, and it should work. if you are happy with the card, RMA might end you up with a used card, with coil whine and other issues..

 

so find yourself a new bios and flash it, quite simple

Link to post
Share on other sites
Posted · Original PosterOP
7 hours ago, 191x7 said:

Windows 7 with Ryzen refresh and RTX 2070? That's a huge no-no.

why? I have seen people even have fps increase on same game with win7 than stupid win10. you may find many video on youtube about that.

Link to post
Share on other sites
Posted · Original PosterOP
4 hours ago, RasmusDC said:

was it not an issue that a few youtubers had.. Gamers Nexus talked a lot about bios being stuck..

 

personally i would just update the bios, and it should work. if you are happy with the card, RMA might end you up with a used card, with coil whine and other issues..

 

so find yourself a new bios and flash it, quite simple

do you mean flash bios for 2070 super? I am not sure how to do it, may I have a guide? but I have checked gpu-z, on reading of its bios, power range seems to be same as others shared online.

Link to post
Share on other sites
Posted · Original PosterOP
8 hours ago, Jurrunio said:

Sticking to base clock, sign of corrupted bios on the card. RMA is the best way to solve it.

do you think few air bubbles under its film(the plastic protection skin on the card) is a sign of used card? which it did come with this issue while I was unboxing it

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×