Jump to content

Kraken X72 on Lian Li 0-11 Dynamic Full Tower

Jawad14
 Share
Go to solution Solved by Jurrunio,
43 minutes ago, Jawad14 said:

it comes in 2.5 slots

this describes the thickness, not length

but I found this

https://pcpartpicker.com/b/YcpG3C

If the Corsair H150i doesnt clash with the FTW3 Ultra (long enough to interfere with the radiator if it's massively thicker), then you're good.

Posted

Does the Kraken X72 360mm AIO watercooler radiator fit in this case on the side?

 

https://www.amazon.com/Lian-Li-PC-O11DW-Tempered-Computer/dp/B07F9TC5W7/ref=sr_1_1?keywords=lian%2Bli&qid=1573247434&sr=8-1&th=1

 

There are 2 form factors of this case, one in full tower and the second one in Mid tower, but I am looking for the full tower. Anyways, I would like to know for both form factors whether each one has the capabilities of containing the Kraken X72 360mm AIO watercooler radiator on the side. I know that it fits of the top of the case, but my real question is: Does it fit on the side? (Because I have read online that only certain thicknesses of radiators will be capable of being installed in the side compartment of the case, whether it is a Mid Tower or a Full Tower of the same company case name, which is Lian Li).

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
18 minutes ago, Jawad14 said:

full tower.

the XL?

 

18 minutes ago, Jawad14 said:

(Because I have read online that only certain thicknesses of radiators will be capable of being installed in the side compartment of the case

too thick will stop long graphics cards or EATX boards that are too wide from fitting in yes, but otherwise it should be fine

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted (edited)
  • Author
20 hours ago, Jurrunio said:

the XL?

 

too thick will stop long graphics cards or EATX boards that are too wide from fitting in yes, but otherwise it should be fine

Not the XL, the normal white one.

 

I'm aiming for a Strix 2080Ti from Asus ROG, I think thats considered as long since it comes in 2.5 slots or something like that. So in conclusion, a Kraken X72 AIO will stop the Asus ROG Strix 2080Ti right?

 

Edited by Jawad14
I had missing information
Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Solution
43 minutes ago, Jawad14 said:

it comes in 2.5 slots

this describes the thickness, not length

but I found this

https://pcpartpicker.com/b/YcpG3C

If the Corsair H150i doesnt clash with the FTW3 Ultra (long enough to interfere with the radiator if it's massively thicker), then you're good.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
On 11/8/2019 at 4:46 PM, Jurrunio said:

the XL?

Fun fact Lian Li used to classify the original as a "full Tower" even though it's smaller than some "mid tower" cases in volume

 

http://www.lian-li.com/pc-o11-dynamic/ "Full Tower" (Now finally a Mid Tower)

Dimensions(W)272mm x(H)446mm x(D)445mm (54L)

 

https://www.fractal-design.com/products/cases/define/define-r6/blackout/

Dimensions 535 x 233 x 448 mm (56L)

 

Looks like since they released the XL they have updated the O11D to be a "Mid Tower" which is appropriate (PCPartPicker has yet to update that though, I'm gonna throw a ticket their way to have that updated)

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna

Make sure to Quote posts or tag the person with @[username] so they know you responded to them!

 RGB Build Post 2019 --- Rainbow 🦆 2020 --- Velka 5 V2.0 Build 2021

Purple Build Post ---  Blue Build Post --- Blue Build Post 2018 --- Project ITNOS

CPU i7-4790k    Motherboard Gigabyte Z97N-WIFI    RAM G.Skill Sniper DDR3 1866mhz    GPU EVGA GTX1080Ti FTW3    Case Corsair 380T   

Storage Samsung EVO 250GB, Samsung EVO 1TB, WD Black 3TB, WD Black 5TB    PSU Corsair CX750M    Cooling Cryorig H7 with NF-A12x25

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
6 minutes ago, TVwazhere said:

https://www.fractal-design.com/products/cases/define/define-r6/blackout/

Dimensions 535 x 233 x 448 mm (56L)

R6 is too long to be a mid tower if you ask me

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
15 minutes ago, Jurrunio said:

R6 is too long to be a mid tower if you ask me

I look at it from Volume rather than any given axis dimension. "How much Sh*t can it hold"? 

 

There's no set definition that I can find however

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna

Make sure to Quote posts or tag the person with @[username] so they know you responded to them!

 RGB Build Post 2019 --- Rainbow 🦆 2020 --- Velka 5 V2.0 Build 2021

Purple Build Post ---  Blue Build Post --- Blue Build Post 2018 --- Project ITNOS

CPU i7-4790k    Motherboard Gigabyte Z97N-WIFI    RAM G.Skill Sniper DDR3 1866mhz    GPU EVGA GTX1080Ti FTW3    Case Corsair 380T   

Storage Samsung EVO 250GB, Samsung EVO 1TB, WD Black 3TB, WD Black 5TB    PSU Corsair CX750M    Cooling Cryorig H7 with NF-A12x25

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Power Supplies

×