Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
mcRYSHER

THE WHITE RIPPER. $7,000 Ultimate PC. RYZEN 3960X, EK custom water cooling, 64Gb DDR4 3200 MHz, 2080Ti Founders Edition, ASUS TRX40-Pro Prime

Recommended Posts

Posted · Original PosterOP

Hello everyone! More christmas gifts have just arrived!

 

photo_2019-12-20_21-11-57.thumb.jpg.1ec532019dc3889fcb07b041ab5e0243.jpg

 

photo_2019-12-20_21-12-00.thumb.jpg.1f26384789c1f07626677d371f6a24b2.jpg

 

photo_2019-12-20_21-12-03.thumb.jpg.5d161378cdabdf9c727c27601dac128b.jpg

 

Also, important update. I will have to do a paint job. Gonna paint rearside of the NZXT H710i (inside and outside). I don't like it black, so I ordered four cans of Rust Oleum 2-in-1 matte white. Any advices are appreciated!

 

getimage_new.jpg.64751f3e1f4c3d1012cf8531b702e8b4.jpg

 

 

Link to post
Share on other sites
Posted · Original PosterOP

Also, I would like to hear your advices about custom cables. I can't decide between Cablemod and Ensourced.  Are custom cables safe? I've read someone got his PSU burned out because of faulty custom cables. 

 

Another thing I am planning is to paint RAM sticks' rads into bright green. I know I need a heat resistant spray, so I am trying to find one of these:

 

 

Spoiler

photo_2019-12-20_01-16-33.thumb.jpg.a8ec46ed78770d4197ea7ccfb9f13054.jpg

 

 

Spoiler

photo_2019-12-20_21-20-09.thumb.jpg.9b44f04d04fb24875eb5b648a46ed5d3.jpg

 

Link to post
Share on other sites
2 minutes ago, mcRYSHER said:

Also, I would like to hear your advices about custom cables. I can't decide between Cablemod and Ensourced.  Are custom cables safe? I've read someone got his PSU burned out because of faulty custom cables.

Haven't had an issue with my @CableMod cables, haven't seen anyone else have PSUs explode because of them either. They probably used iffy quality cables, or they used the wrong kit for their PSU (certain PSUs need certain types of cables). Cablemod makes kits for most bigger brand PSUs on the market AFAIK. 


X58-X79-X99-X299 lads: Intel HEDT Xeon/i7 Megathread - Murica (But International) Parrot Gang

 

Big Rig (Done) - (Main Rig) - i7 5960X @ 4.7Ghz/3.7Ghz core/uncore - Custom Loop: 2x 360GTS with EK-ZMT/Stubbies and EK D5 pump/res combo - EVGA X99 Classified - 32GB (4x8GB) HyperX Predator DDR4 @ 3200MHz CL16 XMP - AMD Radeon VII (best TimeSpy so far: here) - 1TB 970 Evo - Corsair RM1000i - Phanteks Enthoo Evolv ATX TG - 6x iPPC NF-F12 2000 

X79 Rig (Done) - (Alt Rig 1)- i7 4930K @ 4.5GHz - EVGA CLC 280 w/NF-P14s fans - EVGA X79 Dark - 16GBGB (4x4GB) Corsair Vengeance DDR3 @ 1600Mhz CL9 XMP - EVGA GTX 1660 Ti XC Ultra - MX500 1TB - 2x Seagate Barracuda Compute 2TB - EVGA 1000W G3 w/CableMod PRO Carbon cables - Phanteks P400 (White) - NF-P12

 

X58 Rig (Done) - (Alt Rig 2) - Xeon X5675 @ 4.4/3.7 core/uncore- NH-D15S - EVGA X58 Classified SLI 4-Way - 24GB (3x8GB) HyperX Savage Red DDR3 @ 1750Mhz CL9-10-10-27 - 2x EVGA Classified 780s - 120GB HyperX SSD - EVGA 1600W T2 - Corsair 750D - 5x iPPC NF-A14 3000 PWM

 

2019 13" rMBP (i5/8GB/256GB) {work} - 2012 13" MBP (i5/16GB/525GB) {mine} - iPhone 11 Pro Max + Apple Watch S3 42mm - iPod Classic 6G 80GB running Rockbox + iPod Classic 5.5G Enhanced 30GB also on Rockbox - iPhone X - iPhone 4S on iOS 6.1.3

 

whip and nae nae

Link to post
Share on other sites
Quote
  • Location: Saint-Petersburg, Russia (unfortunately)

Then:

Quote

gorgeous Saint-Petersburg (check the pictures in the web)

How's the subway doing?

Link to post
Share on other sites
Posted · Original PosterOP
18 minutes ago, Sir0Tek said:

How's the subway doing?

Saint-Petersburg is a great city! I moved here two years ago. I used to live in the middle of nowhere Russia. 90% russians making 400$/month and cost of living is the same as it is in Europe or USA. Only real estate is much cheaper. Russia is not really a nice place to live. Mostly because of the Soviet union legacy.

 

Anyway, I'm gonna order some cables from cablemod. So sad, they don't make white connectors for cables. But I can live with that, I guess.

Link to post
Share on other sites
Posted · Original PosterOP

Whats up, guys! Received the last parts for my custom watercooling system from EKWB

 

IMG_20191228_141305.thumb.jpg.0818f12a36e553ab7d8bc40b76d6c082.jpg

 

IMG_20191228_141737_1.thumb.jpg.cebb25890915de53f83b028c06cca3c3.jpg

 

As you can see, the white ones came damaged. I reported to EK, will see what they say.

 

Also, I drilled holes in the white bracket of my H710i and did a little test mounting the pump to the bracket. It is nice, straight and smooth.

:)

IMG_20191228_211227.thumb.jpg.aac9339fff5d345075b33bba5b287fb1.jpg

 

IMG_20191228_212457.thumb.jpg.3907288d4fdcaf6ed241e1054431b5c2.jpg

 

IMG_20191228_212439.thumb.jpg.b811f129f5c6a597381f94c9663006e6.jpg

 

Unfortunately, I damaged paint on the bracket while drilling, so tomorrow I will go to local automotive center, they say they will remove the damage completely.

 

I am gonna ask them if they can paint rear panel of the case. And I want the PSU cover panel to be painted as well. The color is white. Will see what they can do.

 

Link to post
Share on other sites
Posted · Original PosterOP

Hello, everyone! Finally finished with painting PC case. 

Like I said I decided not to do it myself. Instead, I went to automotive center and asked them to paint the parts I needed to be white.

They did a great job. Not perfect but definately better than I would do it. 

 

I damaged the white bracket while drilling holes and those guys at autocenter were able to remove the damage completely. Check this out:

 

photo_2020-01-03_20-54-48.thumb.jpg.a7da5abb65f87a4d7035c2146a60fb48.jpgphoto_2020-01-03_20-54-18.thumb.jpg.66ea268b1845e1d0e47de0ce4d012f3d.jpg

 

Here is me unriveting the case:

1217627738_photo_2020-01-03_20-54-18(3).thumb.jpg.d819a7fd00695217c0c2b77d72a6281c.jpg

 

Here are the parts that will be painted white:

1601414080_photo_2020-01-03_20-54-18(2).thumb.jpg.ed292cfb12759f46e8c71da1c5a6015b.jpg

 

The job is done:

photo_2020-01-03_20-54-53.thumb.jpg.28672578f8726b1597fc5a779afd803a.jpg

Link to post
Share on other sites

Clean AF PC Time


X58-X79-X99-X299 lads: Intel HEDT Xeon/i7 Megathread - Murica (But International) Parrot Gang

 

Big Rig (Done) - (Main Rig) - i7 5960X @ 4.7Ghz/3.7Ghz core/uncore - Custom Loop: 2x 360GTS with EK-ZMT/Stubbies and EK D5 pump/res combo - EVGA X99 Classified - 32GB (4x8GB) HyperX Predator DDR4 @ 3200MHz CL16 XMP - AMD Radeon VII (best TimeSpy so far: here) - 1TB 970 Evo - Corsair RM1000i - Phanteks Enthoo Evolv ATX TG - 6x iPPC NF-F12 2000 

X79 Rig (Done) - (Alt Rig 1)- i7 4930K @ 4.5GHz - EVGA CLC 280 w/NF-P14s fans - EVGA X79 Dark - 16GBGB (4x4GB) Corsair Vengeance DDR3 @ 1600Mhz CL9 XMP - EVGA GTX 1660 Ti XC Ultra - MX500 1TB - 2x Seagate Barracuda Compute 2TB - EVGA 1000W G3 w/CableMod PRO Carbon cables - Phanteks P400 (White) - NF-P12

 

X58 Rig (Done) - (Alt Rig 2) - Xeon X5675 @ 4.4/3.7 core/uncore- NH-D15S - EVGA X58 Classified SLI 4-Way - 24GB (3x8GB) HyperX Savage Red DDR3 @ 1750Mhz CL9-10-10-27 - 2x EVGA Classified 780s - 120GB HyperX SSD - EVGA 1600W T2 - Corsair 750D - 5x iPPC NF-A14 3000 PWM

 

2019 13" rMBP (i5/8GB/256GB) {work} - 2012 13" MBP (i5/16GB/525GB) {mine} - iPhone 11 Pro Max + Apple Watch S3 42mm - iPod Classic 6G 80GB running Rockbox + iPod Classic 5.5G Enhanced 30GB also on Rockbox - iPhone X - iPhone 4S on iOS 6.1.3

 

whip and nae nae

Link to post
Share on other sites
Posted · Original PosterOP

Hello, guys!

I've been a bit busy working on my pc to make everything as perfect as possible. It is not fully ready yet but I decided to show what has been going on so far.

 

So I riveted the case. An advice I want to give - cover the surrounding area around rivet hole with masking tape. The rivet tool might tilt at the moment when it is cutting the tail of the installed rivet. So, you might damage the case with the tool.

photo_2020-01-19_20-17-12.jpg.75c929310d5c55cd48bdd5821cde7ed6.jpg

 

Here is the case, repainted and assembled. Look way much better than the default one. photo_2020-01-19_20-20-05.jpg.4b9e1078c10af14fa40f372e56ee4df1.jpg

 

photo_2020-01-19_20-20-08.jpg.fbcc7b6258484b1657a7b2d0f10437c2.jpg

 

Everything is ready for the build!

photo_2020-01-19_20-20-11.thumb.jpg.c23d22310e0ff5e614eb3d918435d033.jpg

 

First thing I started with:

photo_2020-01-19_20-20-14.thumb.jpg.bb82d00858c9fb847a99b94455e11c10.jpg

 

M.2 Gen4 SSD heatsink removed.

photo_2020-01-19_20-20-16.thumb.jpg.39ed09bfe2fef6bb6954ad3bce11e3c4.jpg

 

photo_2020-01-19_20-20-18.thumb.jpg.868ca79841066599ed2367c4ae677f3f.jpg

 

It is EXTREMELY HARD and DANGEROUS to remove the heatsink and not to damage the SSD. Be extremely careful. The tension is high on the brackets. Pay special attention to those brackets on the bottom part of the heatsink.

 

Installing RYZEN 3960x. Very stressful procedure. At least for me.

photo_2020-01-19_20-20-20.thumb.jpg.d7c6d0fe40250229acb28a42194ff175.jpg

 

Mounting the pump inside the case:

photo_2020-01-19_20-20-23.thumb.jpg.135cb113c5f4fcc764f851eb6e52d17c.jpg

 

photo_2020-01-19_20-20-25.thumb.jpg.2ede2810a44df0fd040cf8c75f1739a9.jpg

 

photo_2020-01-19_20-20-30.thumb.jpg.9ffdcef65ae17169d46888d1e4780aaf.jpg

 

photo_2020-01-19_20-20-27.thumb.jpg.14030251bf8a21b805af7563bf8b7bcc.jpg

 

Drainage valve:

photo_2020-01-19_20-20-32.thumb.jpg.f4398cac88d00dbd9e524c0fdbf15998.jpg

 

Working with tubes. I wanted them to have sort of "artistic" look so they will not look boring.

photo_2020-01-19_20-20-34.thumb.jpg.f571aa41083344cb776f3d6d6b0d706e.jpg

 

photo_2020-01-19_20-20-36.thumb.jpg.1fa69ff818332aa90bd0fc851768c570.jpg

 

By the way I installed rad upside down so the drainage point is at the lowest point of the entire system:

 

436.thumb.jpg.a4e73f6d79801e6ea6f7a8da0a270466.jpg

 

123.thumb.jpg.44f03a2b855df20cf83ae265503278a1.jpg

 

 

Pouring the liquid into the system:

photo_2020-01-19_20-20-42.jpg.0df53f7a536f774a07e3f13c40daf7a7.jpg

 

photo_2020-01-19_20-20-44.thumb.jpg.fcd054ff19bcb9ebe94f3751d6ed840d.jpg

 

photo_2020-01-19_20-20-46.thumb.jpg.702975c0f54009f2b4415fc172de4f0f.jpg

 

photo_2020-01-19_20-21-02.jpg.0632e40c18c058e48a0eba3cce83a188.jpg

 

Like I said it is not ready yet. I am still waiting my custom cables from cable mod. And also, I need to paint extension brackets as well as PSU bracket. I bought green heat resistant spray from FOLIATEC but this is shitty paint spray so stay away from it. The spray's tip started to malfunction and stopped spraying in the middle of the painting process so I had to throw it away. It cost 30 bucks per can. The problem is that I painted half of the extension brackets so had to remove the paintjob. I used Dremel tool and it helped me to get rid of the paintjob. I have ordered Rust Oleum Grabber Green spray but it takes 60 days to deliver those to me. The cans can not be transported by the plane so it is a sea delivery.

 

Foliatec paint:

photo_2020-01-19_20-40-21.thumb.jpg.51a9bb61f0f4e662c2c435330e1f01f6.jpg

 

Paint removed:

photo_2020-01-19_20-40-18.thumb.jpg.7fbc55a0f0c2f62d12f39ba03a27b404.jpg

 

I covered it with primer and left it until I receive my Rust Oleum Grabber Green cans.

photo_2020-01-19_20-40-15.thumb.jpg.7887a8dea546bddc54a071ea2a3c936b.jpg

 

 

THE PROBLEMS THAT I HAVE FACED WITH THE PC AND THEIR SOLUTIONS:

 

1. Upon first turn on the PC refused to boot and MoBo LED light showed "DRAM failure" Q-CODE showed "C6" error.

I almost shitted in my pants when I saw that. The PC simply did not boot. So, nothing you can do. I tried to turn it on and off about 7-8 times until I finally saw BIOS screen. I entered BIOS and turned on D.O.C.P profile. That solved the problem right away.

 

2. All usb devices malfunctioning. Mouse stutters, keyboard glitches, usb WiFi drops the connection. MoBo ASUS TRX40 Pro Prime. Windows 10 pro.

I tried a lot of things to fix this. I tried reinstall drivers, I switched power plan to max performance, I unchecked "allow the computer to turn off this device to save power".

Nothing helped. The solution is that you need to go to BIOS and set DISABLE to "Global C State Control". That is the fix.

 

3. Installed Ryzen Master and AMD chipset drivers. Ryzen Master failed to initialize. Internet connection became 4 times slower.

I have usb Wifi adapter TP LINK T2UH. After installing AMD chipset drivers I noticed my internet became significantly slow. The solution is this: I unplugged usb Wifi adapter and plugged it into the other USB port. It solved the issue. If you unplug and plug the adapter in the same port it will work as well but it will slow the internet again after the next boot.

I managed to make Ryzen Master work by installing it under the Administrator account. I googled how to create this account.

 

 

More updates to come within next two weeks. Thanks for reading!

 

P.S.

Some numbers:

3Dmark showed 13200 score. Something close to this was in Cinebench R20. In Blender I rendered the Barbershop scene under 5 minutes.

 

Interesting is that Premiere Pro uses both CPU and GPU when rendering and so it does not load CPU for 100%. I managed to to force it to use 100% of the CPU by assign render to Adobe Media Encoder. 13 minute 1080p video with overlays and effects was rendered under 7-8 minutes I believe. Can't say for sure though.

 

CPU idle temp 39-42 degrees celsius. Under 100% load it is around 54-55 degrees.

Custom water cooling system from EK. The rad is 360 EK Coolstream. Cooled by 3 120mm vardar fans.

 

 

Link to post
Share on other sites
Posted · Original PosterOP

Finally received cables from @CableMod

 

The parcel came from China. I am surprised. The track number worked fine all the way. Took about 2 weeks in total.

 

That's how they pack cables now:

photo_2020-01-27_17-44-11.thumb.jpg.2a99866a102d821613dba6c5b93d81b9.jpg

 

photo_2020-01-27_17-44-09.thumb.jpg.9914ffed723038f7994ba58890bbc8be.jpg

 

photo_2020-01-27_17-44-07.thumb.jpg.5a456cab15ff28d935b38c04d2732978.jpg

 

Not too much for the 190$ order.

 

I saw on youtube (summer 2019) there used to be a box and a some soft of certificate or whatever:

 

194289098_Annotation2020-01-27174945.thumb.png.c230ca9a458ae9a6866d5fa2cedf4bfe.png

 

1662703155_Annotation2020-01-27175017.png.c389ba0b64a85ded146ba7d124e8c841.png

 

However, the quality of the cables is A+. Very accurate and solid. Thanks, cable mod! Great job! 

 

1737506801_1(4).thumb.jpg.e8602b22f54a8a685db719b96450ef53.jpg

 

 

 

1942367875_1(3).thumb.jpg.0d432ceb74ef9977c29471b96106f338.jpg

 

265683079_1(1).thumb.jpg.b67bcc816fa1788eb2318811d81288f5.jpg

 

1353144211_1(2).thumb.jpg.dd6fbebb470c4a40c7c43580e7622c1c.jpg

 

1 (5).jpg

 

The last thing to finish the project is a paint job. Need to paint extension brackets and RAM heatsinks. I ordered memory modding kit from Cable mod.

Have to wait till the beginning of march to get hands on Grabber Green Rust-Oleum heat-resistant paint!

Link to post
Share on other sites

@mcRYSHER we do still use the boxes, however those are only used for direct replacement kits (such as our C-Series RMi/RMx kits for example). Thank you for your support though, your build is fantastic looking! Really nice work!

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×