Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Magicpandajuice

Hardware overclocking ram?

Recommended Posts

Posted · Original PosterOP

On a few older systems I’ve messed with, stuff like bsel modding can provide an overclock, and I was wondering if there was some way to do something similar to ram? Like, say I have ram slower then the motherboards maximum speed it supports, but the bios doesn’t allow for ram overclocking, would it be possible to block off a pin or something that tells the motherboard what speed the ram should run at so that it defaults to its maximum rated speed? I’ve never messed with fam overclocking before so please correct me if there is extra steps I’m missing 

Link to post
Share on other sites

you mean unlocking multipliers that arent available?


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites

BCLK overclocking affects a lot of things, inluding RAM as well on most systems I think. Whether or not it's possible depends on the system and it's specs.


Main rig: 8086K // EVGA Z370 Micro // MSI GTX 1080ti Gaming X // 16GB Gskill TridentZ 3200Mhz CL14 // Seasonic Focus+ Gold 650w // a variety of noctua cooling // a total of 2TB of SSDs // Fractal Meshify C

Secondary rig: 3570K // Asus P8Z77-V LX // Sapphire Pulse RX570 4GB// 16GB HyperX 1600MHz // Cooler Master V650 // 500GB 860 Evo + 2TB BarraCuda // Fractal Meshify C

Audio setup: Audient iD14 // Adam A7X // Sennheiser HD 650 // Sennheiser HD 25-II // Audio Technica M50x

Link to post
Share on other sites
10 minutes ago, Magicpandajuice said:

would it be possible to block off a pin or something that tells the motherboard what speed the ram should run at so that it defaults to its maximum rated speed?

Not on modern boards, no.


Main rig: 8086K // EVGA Z370 Micro // MSI GTX 1080ti Gaming X // 16GB Gskill TridentZ 3200Mhz CL14 // Seasonic Focus+ Gold 650w // a variety of noctua cooling // a total of 2TB of SSDs // Fractal Meshify C

Secondary rig: 3570K // Asus P8Z77-V LX // Sapphire Pulse RX570 4GB// 16GB HyperX 1600MHz // Cooler Master V650 // 500GB 860 Evo + 2TB BarraCuda // Fractal Meshify C

Audio setup: Audient iD14 // Adam A7X // Sennheiser HD 650 // Sennheiser HD 25-II // Audio Technica M50x

Link to post
Share on other sites
Posted · Original PosterOP
Just now, Jurrunio said:

you mean unlocking multipliers that arent available?

I mean something similar to a bsel mod for older cpus, blocking parts of the pins that let the motherboard read what speed the part should run at

Link to post
Share on other sites
13 minutes ago, Magicpandajuice said:

I mean something similar to a bsel mod for older cpus, blocking parts of the pins that let the motherboard read what speed the part should run at

No, you can't fake CPU's architecture to make the board show you more multipliers for the memory. It's totally software mod at that point

 

15 minutes ago, chckovsky said:

BCLK overclocking affects a lot of things, inluding RAM as well on most systems I think. Whether or not it's possible depends on the system and it's specs.

he's talking about covering up some contact pads at the bottom of the CPU, just like modding Z170 and Z270 boards to run 8th and 9th gen CPUs


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×