Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Recommended Posts

Posted · Original PosterOP

Hi.

 

I want to upgrade my 8350, but the time for Ryzen 3000 realease goes slow. 

So i decided to spend it bit creatively. And this is what i dreamed:

 

Case dimensons H=250mm, W=220mm, L=280mm

 

Already bought: 

 

Case parts and cabling                cca 60,-€ (including bribes)

PSU:    Corsair SF600 (2018)               123,90,-€

           2x NOCTUA NF-A15 PWM          37,8,-€

 

Awaiting:

 

   MB:    B550 reasonable priced board, worst scenario is MSI B450I GAMING PLUS AC

CPU:     Ryzen 3600/ 2600

             +NOCTUA NH-U9S

GPU:    MSI Radeon RX 570 ARMOR 8G OC      

RAM:    HyperX 16GB KIT DDR4 3333MHz CL16 

SSD:    ADATA XPG SX6000 Pro SSD 512 GB

 

 

 

 

komplet4.jpg.59c2e96bfc613736fb4cf8da08de1d2e.jpgkomplet3.jpg.2d5cdb1f019a3e3f5717d410b308059a.jpgkomplet.jpg.af8f34a73db527bd50b7735f7d60882b.jpgkomplet2.jpg.e9e3dcd3197417e9c6edec72bf02d85a.jpgkomplet.jpg.af8f34a73db527bd50b7735f7d60882b.jpg

 

Some metal sheets and cabling are already on underway and time pases by very slow again:)

Link to post
Share on other sites

more of a daydream since we dont even see any B550 board


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites

Keep wiring in mind. Just because the render looks good doesn't meant that it will work well once you have the parts in there.

Link to post
Share on other sites
Posted · Original PosterOP
13 hours ago, Mbowen said:

Keep wiring in mind. Just because the render looks good doesn't meant that it will work well once you have the parts in there.

50% of wiring is already sorted out. All excess lenght will find home under PSU, there is zero airflow needed, rest will be tied to the mainboard supporting sheet.

But thx for reminder. I realized, that if i go with  MSI B450I GAMING PLUS AC - it has the M2 port on back of MB, so M2 ssd will be covered by PCI riser. Must find solution...

...and sorry for my engrish1794265944_IMG_20190613_0909401.thumb.jpg.02a399f4bf014fea5fd7d6757f111d92.jpg

Link to post
Share on other sites
6 hours ago, Badomen said:

50% of wiring is already sorted out. All excess lenght will find home under PSU, there is zero airflow needed, rest will be tied to the mainboard supporting sheet.

But thx for reminder. I realized, that if i go with  MSI B450I GAMING PLUS AC - it has the M2 port on back of MB, so M2 ssd will be covered by PCI riser. Must find solution...

...and sorry for my engrish1794265944_IMG_20190613_0909401.thumb.jpg.02a399f4bf014fea5fd7d6757f111d92.jpg

No problem! It just bugs me when I see renders like this and they LOOK all clean and tidy until you realize that the EPS connector is going to be hanging over a 140mm fan or that there isn't much room for a 24p connector. Good job though!

Link to post
Share on other sites
Posted · Original PosterOP

You got a point there with the 8pin, will see if the original cables from PSU are flexible enough, if not, I'll buy low profile 8 pin PSU cable. Thx.

Link to post
Share on other sites
1 hour ago, Badomen said:

You got a point there with the 8pin, will see if the original cables from PSU are flexible enough, if not, I'll buy low profile 8 pin PSU cable. Thx.

No problem! You could also buy a fan grill... it won't look as good but if you go noctua will it matter? lol. Good luck!

Link to post
Share on other sites
Posted · Original PosterOP

Some sheet cutouts already arrived. Still missing the aluminium parts, but its enough for frame assembly. Will start propably next week.

So itchy:).

IMG_20190621_134946.thumb.jpg.e7ed1c1d8ddd9c1d2ff8ad67bd8cd269.jpg

Link to post
Share on other sites
Posted · Original PosterOP

I expected some troubles with welding 1mm sheet, but there was almost none. Even dusted off my old gtx 560, if I guessed the dimensions right:-)

IMG_20190624_150627.jpg

IMG_20190624_152043.jpg

IMG_20190624_152049.jpg

IMG_20190624_154047.jpg

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Buy VPN

×