Jump to content

PSUs and Overclocking

mavmlim
By mavmlim
in Power Supplies
 Share
Posted

I recently overclocked my GPU without regards if my PSU can handle it. I want to know how to determine if my power supply can handle these overclocks. My system has a Corsair SF 600 80 plus gold power supply with an RX 570 Overclocked at 1500 MHz Core frequency (1244MHz Stock) and Memory Frequency of 2200 MHz (1750 stock). My GPU Caps at out temps of 59 degs so i assume that i have no problem with my cooling. 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Yes, it's fine.

i9 9900K @ 5.0 GHz, NH D15, 32 GB DDR4 3200 GSKILL Trident Z RGB, AORUS Z390 MASTER, EVGA RTX 3080 FTW3 Ultra, Samsung 970 EVO Plus 500GB, Samsung 860 EVO 1TB, Samsung 860 EVO 500GB, ASUS ROG Swift PG279Q 27", Steel Series APEX PRO, Logitech Gaming Pro Mouse, CM Master Case 5, Corsair AXI 1600W Titanium. 

 

i7 8086K, AORUS Z370 Gaming 5, 16GB GSKILL RJV DDR4 3200, EVGA 2080TI FTW3 Ultra, Samsung 970 EVO 250GB, (2)SAMSUNG 860 EVO 500 GB, Acer Predator XB1 XB271HU, Corsair HXI 850W.

 

i7 8700K, AORUS Z370 Ultra Gaming, 16GB DDR4 3000, EVGA 1080Ti FTW3 Ultra, Samsung 960 EVO 250GB, Corsair HX 850W.

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

as long as you're not running a 12 core or higher Skylake-X or similar power draw CPUs you will be fine on the PSU's front

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

yeah okay, but what if I had a 500W power supply, is there some sort of method to know if my power supply can handle these overclocks? 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

If overclocking would make your PC pull more power than the PSU's over-power protection, the PSU would shut down.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

so in other words, theres no need for concern if after the overclock my PSU does not go haywire?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

No, there's not. It's not like overclocking is any different than just putting a higher-power GPU or CPU, anyway. It's just putting more load on the power supply.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Power Supplies

×