Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
mpac

Zotac RTX2070 AMP Extreme fan spiking up and down under load

Recommended Posts

Posted · Original PosterOP

between 2 PCs, 5 cards tested, all exhibit the exact same behavior. 3 were from one retailer, 2 were from a completely different retailer.

 

when under load (>90%) the fan rpm keeps dropping and sometimes spike to 3500rpm. even if set to manual fan mode,doesnt matter which speed I set it to, fans will run fine until I give it a load >90% such as playing a game. doesn't happen when doing desktop work, or even running realbench regardless which speed I set it to. gaming/graphics benchmarks only. tried latest and past drivers. tried setting custom fan curves, manual fan settings all speeds, doesn't make a difference. 

 

the sound is annoying with it constantly revving during gaming. just curious what it could be? it'll run for 5-10 seconds, then starts getting these spikes and drops, and it keeps repeating.

 

 

gpu.png

Link to post
Share on other sites

use custom fan curve?


The best thing to do is reading the clock speed that doesnt end in a pair of zeros

CPU: i7-2600K 4745MHz 1.408V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.2MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2200MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP
4 minutes ago, Jurrunio said:

use custom fan curve?

like I said, it doesn't matter. even if set to one constant speed. as you can see in the image, temp and fan speed is constant, yet fan rpm is fluctuating.

Link to post
Share on other sites
2 minutes ago, mpac said:

like I said, it doesn't matter. even if set to one constant speed. as you can see in the image, temp and fan speed is constant, yet fan rpm is fluctuating.

didnt see that

 

what if you unplug the fan plug on the card and connect it elsewhere, say a fan header on a motherboard?


The best thing to do is reading the clock speed that doesnt end in a pair of zeros

CPU: i7-2600K 4745MHz 1.408V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.2MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2200MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP
10 minutes ago, Jurrunio said:

didnt see that

 

what if you unplug the fan plug on the card and connect it elsewhere, say a fan header on a motherboard?

the fans on the gpu work fine elsewhere. even on the gpu they work fine until high gpu load.

Link to post
Share on other sites
5 minutes ago, mpac said:

the fans on the gpu work fine elsewhere. even on the gpu they work fine until high gpu load.

maybe buck converter delivering voltage to the fan malfunctions? Is the fan 3pin or 4pin?


The best thing to do is reading the clock speed that doesnt end in a pair of zeros

CPU: i7-2600K 4745MHz 1.408V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.2MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2200MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP
1 minute ago, Jurrunio said:

maybe buck converter delivering voltage to the fan malfunctions? Is the fan 3pin or 4pin?

4 pin. yea maybe under load fan voltage sags. I should try splitting the power out to the motherboard and keep signal and tacho signals to the card.

Link to post
Share on other sites
2 minutes ago, mpac said:

4 pin. yea maybe under load fan voltage sags. I should try splitting the power out to the motherboard and keep signal and tacho signals to the card.

kinda odd though, cards I have with pwm fans use 12V directly from the PSU, if you're getting voltage swings as slow as that the motherboard should read odd things.


The best thing to do is reading the clock speed that doesnt end in a pair of zeros

CPU: i7-2600K 4745MHz 1.408V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.2MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2200MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×