Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Gilgam3s1

Pull fan for my 212 black rgb

Recommended Posts

Posted · Original PosterOP

Currently have a 212 Black edition RGB set up in my rig but as it only comes with one fan set to pull i would like a second pull fan. So what would you guys recomend. The fan it come with is a silincio sf120r rgb so I would like something with a similar aesthetic design

Link to post
Share on other sites

just get that fan then, since you already named it out.


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP

Shouldn't the second fan have a slightly higher cfm rating and rpms though when using a push pull to have better airflow?

7 minutes ago, Jurrunio said:

just get that fan then, since you already named it out.

 

Link to post
Share on other sites
15 minutes ago, Gilgam3s1 said:

Shouldn't the second fan have a slightly higher cfm rating and rpms though when using a push pull to have better airflow?

 

don't bother, you will have a super hard time finding a fan that looks similar. If you actually care about cooling you should get a better cooler from the start. Say, the dual fan + RGB Cryorig H7 Quad Lumi or upgrade to the straight up bigger CM MA620P RGB

 

and also the advantages are theoretical. None of the push pull coolers have different fans at stock.


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
14 minutes ago, Gilgam3s1 said:

Shouldn't the second fan have a slightly higher cfm rating and rpms though when using a push pull to have better airflow?

 

Why should it have that?

 

Link to post
Share on other sites
3 minutes ago, Glinch said:

Why should it have that?

 

It's so the pull fan is pulling more air than the push fan can push through the heatsink to efficiently dissipate heat, if the pull fan were weaker, heat would remain in the heatsink for longer.


Aesthetics Goddess & Light Theme User

 

 

My Custom PC Build Log  |  My Brother's Custom PC Build Log  |  PC Rig Photography

 

i5-8600K | Deepcool Neptwin White | Asus Z370-P | 16GB DDR4-2800 | Asus GTX 1060 3GB | 500GB Crucial P1 + 240GB Crucial BX500 | NZXT S340 | Corsair CX450M

Link to post
Share on other sites
Just now, seoz said:

It's so the pull fan is pulling more air than the push fan can push through the heatsink to efficiently dissipate heat, if the pull fan were weaker, heat would remain in the heatsink for longer.

Isn't equal in/out just as good?

Link to post
Share on other sites
Just now, Glinch said:

Isn't equal in/out just as good?

Either way works fine, it's just generally better to be pulling more air than you are pushing so heat is removed from the heatsink quicker.


Aesthetics Goddess & Light Theme User

 

 

My Custom PC Build Log  |  My Brother's Custom PC Build Log  |  PC Rig Photography

 

i5-8600K | Deepcool Neptwin White | Asus Z370-P | 16GB DDR4-2800 | Asus GTX 1060 3GB | 500GB Crucial P1 + 240GB Crucial BX500 | NZXT S340 | Corsair CX450M

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Buy VPN

×