Dram LED solid Red on New build. No post no beep

[Sirak]

Hi, 

So yesterday I finished my first ever PC build. 

Specs:

Psu: thermaltake 700W rgb

Motherboard: gigabyte aorus b450 pro 

CPU: AMD ryzen 5 2400g 

Ram: 2x 8gb gskill tridentZ rgb 3000

Some ssds and hdds 

 

My issue:

Rgb led is solide red. Monitor says no Signal and the beeper doesn't make any sound neither with ram nor without. 

 

I have read that the amd CPUs take a long time to Boot first time, maybe I waited to short? 

Or is it a broken part? 

I have no idea anymore

Tried clr cmos, tried every ram slot. Rgbs work on the ram btw

 

Thanks in advance

[HoneyBadger84]

Try a single stick in the slot closest to the CPU.  If it's not powering up at all, or what exactly is it doing?  It should be able to boot up up to the point where the RAM LED would light up, with no RAM present, if it doesn't, that would indicate perhaps the memory controller is the issue.

 

Do you have another PC you can try the RAM in to confirm if the sticks work or not?

 

Side note: The RGB/LEDs on the RAM working means almost nothing unfortunately.

[Sirak]

It powers up, all the lights go on and all fans move usb ports also work (by that I mean they are transmitting Power, I tried with my Phone) 

Already tried that can start up until the ram led lights up. 

Same if started with no ram at all. I maybe can test the sticks on my dads PC however as stated it does not make any beeps at all. Only the typical 'pc starting noise' 

[HoneyBadger84]

If the RAM works in another computer, that means it's likely either the RAM slots on the motherboard, or something else to do with the board itself, that is the issue, and not the RAM, that's the purpose behind trying it in another machine.

[Sirak]

I tried the ram on another machine and it works. The board is on it's way home right now