Jump to content

Planning a build for a friend

Im planning to help my friend upgrade his set up from a laptop with a 860m, to a full tower desktop (could be any tower size) I'm just wondering if anyone could see if the list I put together is good or if there are changes I should make.

 

Parts list I put together for him here PCPartPicker Link.

Helpful stuff:

  • Has 2x 1080p 60hz monitors
  • wants to OverClock
  • streams (his Twitch is: TommyKarate6)
  • plays fortnite, sea of theaves, idk what other games
  • budget ~$1000 or less if possible
Link to comment
Share on other sites

Link to post
Share on other sites

7 minutes ago, MadeInChina O69 said:

Parts list I put together for him here PCPartPicker Link.

Helpful stuff:

  • Has 2x 1080p 60hz monitors
  • wants to OverClock
  • streams (his Twitch is: TommyKarate6)
  • plays fortnite, sea of theaves, idk what other games
  • budget ~$1000 or less if possible

Ryzen would be better if he's planning on using software x264 encoding for his twitch stream. More cores/threads for the same price.
 

CPU: Intel i7 6700k  | Motherboard: Gigabyte Z170x Gaming 5 | RAM: 2x16GB 3000MHz Corsair Vengeance LPX | GPU: Gigabyte Aorus GTX 1080ti | PSU: Corsair RM750x (2018) | Case: BeQuiet SilentBase 800 | Cooler: Arctic Freezer 34 eSports | SSD: Samsung 970 Evo 500GB + Samsung 840 500GB + Crucial MX500 2TB | Monitor: Acer Predator XB271HU + Samsung BX2450

Link to comment
Share on other sites

Link to post
Share on other sites

Because he is streaming he needs an overkill CPU or a CPU with multiple cores, what Spotty recommended is good. Maybe Ill hold up on the 1660 ti till more news comes up about it, a good alternative would be a 580 or 590. 

Link to comment
Share on other sites

Link to post
Share on other sites

14 minutes ago, m9x3mos said:

 @Sanibola even a 2060 wouldn't be a horrible buy in comparison. It performs a little better in initial tests and has the other new features and is only about 30$ more or something like that.

It's more like a $70 price difference between the two. GTX 1660Ti starts at $279 and the RTX 2060 starts at $350. What you're likely thinking of is the most expensive model of the 1660Ti (Asus Strix OC, $330) compared to the cheapest RTX 2060's.

CPU: Intel i7 6700k  | Motherboard: Gigabyte Z170x Gaming 5 | RAM: 2x16GB 3000MHz Corsair Vengeance LPX | GPU: Gigabyte Aorus GTX 1080ti | PSU: Corsair RM750x (2018) | Case: BeQuiet SilentBase 800 | Cooler: Arctic Freezer 34 eSports | SSD: Samsung 970 Evo 500GB + Samsung 840 500GB + Crucial MX500 2TB | Monitor: Acer Predator XB271HU + Samsung BX2450

Link to comment
Share on other sites

Link to post
Share on other sites

Can use cheaper fans, cooler and  motherboard if you really need to cut the price down, but otherwise don't because these parts are worth their price.

 

CPU: More multicore performance is better for streaming so you don't need Shadowplay (GPU-assisted x264 encoding). Shadowplay isn't efficient in its coding so you need higher bit rates to look good, bad thing for a streamer when bit rate is capped (and not everyone get fast enough internet for high bit rates). Gaming performance is 10-20% worse than the 2700 and 40%+ worse in CPU heavy games compared to the 8600k, but it is cheap and handles streaming better than the 8600k.

 

CPU cooler: The cheapest high end cooler, can just max out the R7 1700's OC potential (at 1.4v average do 3.9GHz, tops at 4GHz) at low noise levels. Even the stock cooler can handle the R7 1700 if you don't mind a bit of noise.

 

Motherboard: My go-to board for Ryzen 7s, with good enough VRM and complete feature set a B450 board should have.

 

Memory: Just cheaper sticks with same specs.

 

SSD: Larger capacity SSDs give you much more space per dollar, and is also faster.

 

GPU: Because more performance than the 1660ti and can use RTX stuff just in case anything interesting becomes available. Even without considering RTX features though, 2060 is well-priced.

 

Case: NZXT H500's airflow is mediocre at best, the CPU thermals aren't impressive, GPU thermals are only good in negative pressure setups so air can enter through the PCIe bracket (which means dust coming in without filtering). Corsair 275R performs better with a relatively clean (compared to better airflow cases at this price range) look.

 

Fans: Gentle Typhoons are strong intake fans that operate at low noise on full speed. Airflow rate isnt that high compared to other 120mm fans but that's common among static pressure fans (just like driving with a lower gear means lower speed) because they have to pull air through obstacles (the air filter and front panel). ML120 is reasonably quiet at similar RPMs as the gentle typhoons do (but not as quiet), but airflow rate is higher with lower static pressure (unless you crank up the RPM, in which it's no longer quiet).

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×