Cases that can fit the ASUS Dominus mobo?

[L04D3R]

Since CaseLabs shut down last year i've been searching for a case that can replace the SMA8, got any ideas on which case would be good. Must contain room for liquid cooling,radiators and hard drives. It's going to be like a workstation/server.

[Zando_]

This can fit HPTX and an impressive amount of radiators, HPTX is only slightly larger than the Dominus' form factor: https://www.newegg.com/Product/Product.aspx?Item=9SIA7TD8G67254

[NumLock21]

I have not taken a closer look at that board and what formfactor it uses. But my guess is it's probably something proprietary. The only large cases I can think off is, Corsair 900D, 1000D, which might fit. If you're building a workstation/server then there are plenty of socket 3647 boards without the outrageous price tag.

[TVwazhere]

Corsair 1000D is probably your best bet unless you wanna pay $900 for the Phanteks Elite

 

 

[TheSLSAMG]

If you don't mind absolute excess, I know the Corsair 1000D fits it. EVGA's DG-84/86/87 cases also fit it as well as Phanteks' Enthoo Primo/Pro/Luxe/Elite. Cable management might get a bit hairy in the smaller cases though.

[Zando_]

Just now, NumLock21 said:

I have not taken a closer look at that board and what formfactor it uses. But my guess is it's probably something proprietary. The only large cases I can think off is, Corsair 900D, 1000D, which might fit.

It's uh.... SSI-MEB I think, 14" x 14", slightly wider and shorter than HPTX. IDK the standoff pattern tho, I'd hope it's standard and similar to HPTX, then it should fit in any case that works with that. 

[NumLock21]

5 minutes ago, Zando Bob said:

It's uh.... SSI-MEB I think, 14" x 14", slightly wider and shorter than HPTX. IDK the standoff pattern tho, I'd hope it's standard and similar to HPTX, then it should fit in any case that works with that. 

I was also thinking about the standoff pattern, where it might be different.

From Asus

Quote

EEB Form Factor
14 inch x 14 inch ( 35.5 cm x 35.5 cm )

From the pic, it seems to have a different standoff pattern.

[TVwazhere]

1 hour ago, NumLock21 said:

I was also thinking about the standoff pattern, where it might be different.

From Asus

From the pic, it seems to have a different standoff pattern.

 

Hole pattern is SSI EEB, similar to their SAGE board. The main challenge is the board itself extends beyond the side AND top (much like how "E-ATX boards" today use ATX mounting but are too big to fit the actual ATX spec)

 

It doesnt really meet HTPX because of the direction the board extends (downwards for HTPX, upwards for Dominus) MMB though extends further upwards from the photos I can see online, so It's most likely going to still be marketed as SSI EEB