Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Cotroneo

7700K potentially abnormal temps? (NH-D15)

1 minute ago, Cotroneo said:

It used to be in the other slot when I used a Cryorig H5, but with the D15, it's an issue of clearence. Speaking of the H5, I had better temps with that, but I wound up using it in a build for a buddy. So it honestly might be like what others have said about the paste drying up, or it not being seated properly now that you guys reminded me of the H5.

You shouldnt have a clearance issue with that cooler, it'll be tight but the card will fit in the top slot. It has higher bandwidth than the lower one. - I have the same cooler

 

Take a try at reseating that big boy then, use a perfect amount of paste and make sure the thing is tight

Recommended Posts

Posted · Original PosterOP

So my computer by no means has weak cooling, and the picture will show my current cooling setup:

2x bottom intake (The red AF 140mm has been replaced with a matching NF-A14 like the one next to it.

The 2 front intake and the rear exhaust are all Noctua NF-A14 iPPC 2000 Industrial fans, and of course the cooler is the distinct, D15. :P

 

My issue is that the CPU - at stock speeds - will teach temps of 85 degrees when playing games, and temps of 75 with virus scans. I'm never below 42 degrees, no matter what. My bedroom is a nice 'hot' 66 degrees (before I play games), if that would contribute to it at all. 

 

Also, my graphics card has no issues temperature wise.

 

hehe.jpg


CPU: Intel i7-7700K @ 4.8GHz || GPU: EVGA GeForce GTX 1080 Ti FTW 3 || CPU Cooler: Noctua NH-D15 (Dual Fan) || RAM: G.Skill Ripjaws V 16GB (2x8) 3200MHZ || MotherboardAsus STRIX Z270-E GAMING || Case: Fractal Design - Define R5 Titanium (Windowless) || Storage: Samsung 850 EVO 500GB, 850 EVO 1TB, Crucial MX300 1.1TB, Seagate- Barracuda 2TB || PSU: EVGA SuperNOVA G3 750W

Link to post
Share on other sites

Try and remount the cooler, idle temps should definitely be lower with that cooler

 

Why is your graphics card in the lower second pcie slot?


𝓗𝓲 𝓱𝓸𝔀 𝓪𝓻𝓮 𝔂𝓪

Link to post
Share on other sites

Thermal paste dried up probably. Also make sure you give some omph when screwing the cooler down, low mounting pressure also gives poor thermals.


The best thing to do is reading the clock speed that doesnt end in a pair of zeros

CPU: i7-2600K 4745MHz 1.408V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.2MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2200MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites

Is it delidded? Those temps are normal for a 7700k no matter what cooler you use since the problem lies between the CPU itself and its IHS

 

a friend has the same CPU and it's a toaster, according to Intel the temperature are inside the "normal operating range" so... 


ASUS X470-PRO • R7 1700 4GHz • Corsair H110i GT P/P • 2x MSI RX 480 8G • Corsair DP 2x8 @3466 • EVGA 750 G2 • Corsair 730T • Crucial MX500 250GB • WD 4TB

Link to post
Share on other sites
Posted · Original PosterOP
27 minutes ago, Slottr said:

Try and remount the cooler, idle temps should definitely be lower with that cooler

 

Why is your graphics card in the lower second pcie slot?

It used to be in the other slot when I used a Cryorig H5, but with the D15, it's an issue of clearence. Speaking of the H5, I had better temps with that, but I wound up using it in a build for a buddy. So it honestly might be like what others have said about the paste drying up, or it not being seated properly now that you guys reminded me of the H5.


CPU: Intel i7-7700K @ 4.8GHz || GPU: EVGA GeForce GTX 1080 Ti FTW 3 || CPU Cooler: Noctua NH-D15 (Dual Fan) || RAM: G.Skill Ripjaws V 16GB (2x8) 3200MHZ || MotherboardAsus STRIX Z270-E GAMING || Case: Fractal Design - Define R5 Titanium (Windowless) || Storage: Samsung 850 EVO 500GB, 850 EVO 1TB, Crucial MX300 1.1TB, Seagate- Barracuda 2TB || PSU: EVGA SuperNOVA G3 750W

Link to post
Share on other sites
Posted · Best Answer
1 minute ago, Cotroneo said:

It used to be in the other slot when I used a Cryorig H5, but with the D15, it's an issue of clearence. Speaking of the H5, I had better temps with that, but I wound up using it in a build for a buddy. So it honestly might be like what others have said about the paste drying up, or it not being seated properly now that you guys reminded me of the H5.

You shouldnt have a clearance issue with that cooler, it'll be tight but the card will fit in the top slot. It has higher bandwidth than the lower one. - I have the same cooler

 

Take a try at reseating that big boy then, use a perfect amount of paste and make sure the thing is tight


𝓗𝓲 𝓱𝓸𝔀 𝓪𝓻𝓮 𝔂𝓪

Link to post
Share on other sites
Posted · Original PosterOP
13 minutes ago, aezakmi said:

Is it delidded? Those temps are normal for a 7700k no matter what cooler you use since the problem lies between the CPU itself and its IHS

 

a friend has the same CPU and it's a toaster, according to Intel the temperature are inside the "normal operating range" so... 

Not delidded, and I already was bummed out to find out after I got the 7700K that the temps were toasty. I had better temps in the first iteration of my setup, which only had one bottom intake (the red AF 140), an NF-A14 as  rear exhaust, the 2x fractal fans as front intake and a Cryorig H5 Ultimate. Not bad cooling, but it's just strange that the cooling was better back then. I would assume it would be too much fans now, but it doesn't change the fact that my GPU temps have never changed.


CPU: Intel i7-7700K @ 4.8GHz || GPU: EVGA GeForce GTX 1080 Ti FTW 3 || CPU Cooler: Noctua NH-D15 (Dual Fan) || RAM: G.Skill Ripjaws V 16GB (2x8) 3200MHZ || MotherboardAsus STRIX Z270-E GAMING || Case: Fractal Design - Define R5 Titanium (Windowless) || Storage: Samsung 850 EVO 500GB, 850 EVO 1TB, Crucial MX300 1.1TB, Seagate- Barracuda 2TB || PSU: EVGA SuperNOVA G3 750W

Link to post
Share on other sites
Posted · Original PosterOP
3 minutes ago, Slottr said:

You shouldnt have a clearance issue with that cooler, it'll be tight but the card will fit in the top slot. It has higher bandwidth than the lower one. - I have the same cooler

 

Take a try at reseating that big boy then, use a perfect amount of paste and make sure the thing is tight

 

If it works for you, then it definitely is a case of me being a big wuss, fearing that if anything gets within a CM of the card, it'll kill it. I'll definitely try reseating it.  :}


CPU: Intel i7-7700K @ 4.8GHz || GPU: EVGA GeForce GTX 1080 Ti FTW 3 || CPU Cooler: Noctua NH-D15 (Dual Fan) || RAM: G.Skill Ripjaws V 16GB (2x8) 3200MHZ || MotherboardAsus STRIX Z270-E GAMING || Case: Fractal Design - Define R5 Titanium (Windowless) || Storage: Samsung 850 EVO 500GB, 850 EVO 1TB, Crucial MX300 1.1TB, Seagate- Barracuda 2TB || PSU: EVGA SuperNOVA G3 750W

Link to post
Share on other sites
1 minute ago, Cotroneo said:

 

If it works for you, then it definitely is a case of me being a big wuss, fearing that if anything gets within a CM of the card, it'll kill it. I'll definitely try reseating it.  :}

I nearly shit myself when I realized how close it was to the backplate of my card, but alls good


𝓗𝓲 𝓱𝓸𝔀 𝓪𝓻𝓮 𝔂𝓪

Link to post
Share on other sites

Volts? Your CPU is probably using way more volts than it really needs. Disable any auto-OC feature and set manual voltages. That should fix things. If you are still experiencing issues, remount cooler.

 

PS. When you use 2 temperature system in single post, its really confusing. 66C room temp is like Japanese sauna.


^^^^ That's my post ^^^^
<-- This is me --- That's your scrollbar -->
vvvv Who's there? vvvv

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×