Jump to content
Phishing Emails & YouTube Messages - Fake Giveaway Read more... ×
Search In
  • More options...
Find results that contain...
Find results in...
MinerModi

New pc frezees after 10 mins into any game

Recommended Posts

Posted · Original PosterOP

Hello 

So i just built my pc yesterday and ive been facing a major issue where any game I try would run fine for about 10-15 minutes then the game would freeze, I have tried to play fortnite and Apex legends and both have the issue i would appreciate any help.  So far i have tried updating the mobo bios and reinstalling windows and wiping and reinstalling drivers using DDU to no avail.

Specs

Gigabyte b450 aorus elite

Ryzen 5 2600

Corsair Vengeance RGB Pro 16 GB

MSI GTX 1070

Sandisk ssd plus 240gb

Evga 750 watt bronze semi modular

Link to post
Share on other sites

I had this issue a few times. It turned out to be a conflict with the hd audio bus. No idea if you have the same issue but you can give it a shot. Go to device manager and disable HD audio bus and see if that helps. If that is the problem and you need the hdmi passthrough then you will have ti figure out how to resolve the conflict. If you are connecting speakers ti the motherboard then just don't worry about it. Good luck

img_5a6c06dcb8671.jpg

Link to post
Share on other sites

It may be CPU OC, ram or GPU OC problem. And always start with hardware check, not with reinstalling system. It's not a good idea to start installing anything with faulty hardware.

Link to post
Share on other sites
Posted · Original PosterOP

I dont know if this could help but the error code fortnite spits out is 

LogConsoleResponse: Display: Failed to find resolution value strings in scalability ini. Falling back to default.

 

Link to post
Share on other sites
On 2/11/2019 at 7:15 PM, MinerModi said:

I dont know if this could help but the error code fortnite spits out is 

LogConsoleResponse: Display: Failed to find resolution value strings in scalability ini. Falling back to default.

 

Have you installed your mobo drivers (not bios) ? maybe there's some conflict as @Sat1600 said, 


Case: Corsair 760T  |  Psu: Evga  650w p2 | Cpu-Cooler : Noctua Nh-d15 | Cpu : 8600k  | Gpu: Gygabyte 1070 g1 | Ram: 2x8gb Gskill Trident-Z 3000mhz |  Mobo : Aorus GA-Z370 Gaming K3 | Storage : Ocz 120gb sata ssd , sandisk 480gb ssd , wd 1gb hdd | Keyboard : Corsair k95 rgb plat. | Mouse : Razer deathadder elite | Monitor: Dell s2417DG (1440p 165hz gsync) & a crappy hp 24' ips 1080p | Audio: Schiit stack + Akg k712pro + Blue yeti.

Link to post
Share on other sites
Posted · Original PosterOP
10 hours ago, homeap5 said:

Do you even try my advice? Disable oc? Especially in gpu?

I haven't applied any overclock on any part so there is nothing to disable 

Link to post
Share on other sites
Posted · Original PosterOP
9 hours ago, Peskanova said:

Have you installed your mobo drivers (not bios) ? maybe there's some conflict as @Sat1600 said, 

Im assuming you mean drivers such as the lan and sound drivers if so then yes

Link to post
Share on other sites
Posted · Original PosterOP

Update:

So i replaced the 1070 with the only other gpu i had on hand which was an rx 570 and the issue disappeared, but because the rx 570 is less power hungry than the 1070 i assumed i had narrowed down the issue to either the gpu itself or the psu. So i headed down to my local pc shop and we started by trying the closest gpu to the 1070 they had (a 1070ti) but the issue still remained. At this point we thought the issue was defo just the psu but after replacing the psu with a corsair cx 750 THE ISSUE STILL REMAINED.  So far i have removed the gpu and power supply as possible hardware variables but i still haven't found the root of the issue. Could it be ram??? Then again why would using a less powerful gpu get rid of the issue ?!?

Idk what to do at this point any advice is greatly appreciated 

Link to post
Share on other sites
3 hours ago, MinerModi said:

I haven't applied any overclock on any part so there is nothing to disable 

Your gpu card IS overclocked by manufacturer. So use MSI Afterburner to underclock. Both - core and memory clock.

Link to post
Share on other sites
Posted · Original PosterOP
On 2/11/2019 at 6:43 PM, myselfolli said:

Any game or just those two?

Those two and the cinebench open GL test but unigine heaven and 3d mark run perfectly fine

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×