Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Tristerin

What causes a loop to leak?

Recommended Posts

Posted · Original PosterOP

I assume the following:

 

Operator Error in general

Loose fittings (is there a typical monkey tight not gorilla tight approach here?)

hoses cracking (from....?) or spitting at the barbs?

 

Is it often that a pump or reservoir develops a leak?  CPU block?  Would love to hear some testimonies as I begin my journey with my Cheapo Loop (learning experience)so I can avoid potential disaster if possible lol.

 

Already have my cheapo pump and reservoir on the way from China care of aliexpress lol.  Ill do a build log on the thing haha.


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, Custom Loop 2x240mm + 1x120mm radiator, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman ZM-GM1 mouse, Hannspree HF207 and Acer AL2016W monitors

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, 2x Gigabyte HD 7850 2gb GPUs in crossfire, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, PCCOOLING 160w TDP air cooler, 60gb Patriot SSD Win 10 boot drive, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  Logitech Wireless Keyboard and Mouse, Roku 55" 4k TV

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 2gb ram tinker toy at the moment.  Running Manjaro at the moment

APU Laptop: I need to clean this things TIM up so it can boot into Windows 7 for more than 5 minute before overheating at idle, it has things, I just haven't been on it in 2 years or so

Link to post
Share on other sites

Usually if you get a decent waterblock from a decent company, the chances of it failing and leaking are pretty low.

 

Pumps tend to die rather than leak from what I've observed.

Link to post
Share on other sites
Posted · Original PosterOP
2 minutes ago, Crunchy Dragon said:

Usually if you get a decent waterblock from a decent company, the chances of it failing and leaking are pretty low.

 

Pumps tend to die rather than leak from what I've observed.

Ill be honest, Im going for cheapo for an old LGA 1155 motherboard...$15 shipped for the copper contacted brass block (lol) with barbs included.  Im willing to take the risk tbh as it can be an excuse to retire my PC to the HTPC if I blow it up.  LOL.


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, Custom Loop 2x240mm + 1x120mm radiator, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman ZM-GM1 mouse, Hannspree HF207 and Acer AL2016W monitors

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, 2x Gigabyte HD 7850 2gb GPUs in crossfire, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, PCCOOLING 160w TDP air cooler, 60gb Patriot SSD Win 10 boot drive, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  Logitech Wireless Keyboard and Mouse, Roku 55" 4k TV

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 2gb ram tinker toy at the moment.  Running Manjaro at the moment

APU Laptop: I need to clean this things TIM up so it can boot into Windows 7 for more than 5 minute before overheating at idle, it has things, I just haven't been on it in 2 years or so

Link to post
Share on other sites

#1 cause of leaks is fittings, #2 is probably reservoirs cracking or leaking from the threads.

Would highly recommend spending extra money on good quality fittings from bitspower instead of cheaping out and going with EK or some other budget brand.


My sound system costs more than my PC.        Check out my S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Intel i7 4790k | ASUS GTX770 | ASUS Sabertooth Z97 Mark S | Corsair Vengeance Pro 32GB | NZXT S340 | Seasonic Platinum 760 | modded H100i | Ducky ONE White TKL RGB | Logitech MX Master 2S | 2x Samsung 850 Pro 512GB | WD Red 4TB Samsung 58" 4k TV | 2x Behringer NEKKST K8 | BIC Acoustech H-100II | Scarlett 2i4 | 2x AT2020

 

Link to post
Share on other sites
5 minutes ago, Tristerin said:

I assume the following:

 

Operator Error in general

Loose fittings (is there a typical monkey tight not gorilla tight approach here?)

hoses cracking (from....?) or spitting at the barbs?

 

Is it often that a pump or reservoir develops a leak?  CPU block?  Would love to hear some testimonies as I begin my journey with my Cheapo Loop (learning experience)so I can avoid potential disaster if possible lol.

 

Already have my cheapo pump and reservoir on the way from China care of aliexpress lol.  Ill do a build log on the thing haha.

If you do the proper steps to leak test and take the necessary precautions leaks are not very common, seals would be the first thing to go. Most times it's more likely to be a spill from filling or draining the loop unless the PC gets dropped or physically damaged. 

 

That is baring that the components themselves are of decent quality and not complete junk.

Link to post
Share on other sites
Posted · Original PosterOP
3 hours ago, Enderman said:

#1 cause of leaks is fittings, #2 is probably reservoirs cracking or leaking from the threads.

Would highly recommend spending extra money on good quality fittings from bitspower instead of cheaping out and going with EK or some other budget brand.

Oh no sir, you don't understand.  Im talking sub $50 Cheapo Loop.  Its not about the money at this time but the learning experience.  And the...fun lol.  Pump and Reservoir so far cost me $23 shipped, CPU block with barbs $15, tubing will run me $5-6 for to much, and the radiator I haven't picked yet...lol...likely aluminum 80mm hahahaha.  

 

66% distilled, balance with glycol antifreeze.

 

3 hours ago, W-L said:

If you do the proper steps to leak test and take the necessary precautions leaks are not very common, seals would be the first thing to go. Most times it's more likely to be a spill from filling or draining the loop unless the PC gets dropped or physically damaged. 

 

That is baring that the components themselves are of decent quality and not complete junk.

Oh...junk.  I saw a few pics of people doing it in open cases with paper down to run the loop for a while (no PC parts inside) to check for leaks which I plan on doing.  But yea...from Junk.  Sourced from the cheapest I can find lol.  Ill do a build log (pump and reservoir...$23 shipped lol)


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, Custom Loop 2x240mm + 1x120mm radiator, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman ZM-GM1 mouse, Hannspree HF207 and Acer AL2016W monitors

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, 2x Gigabyte HD 7850 2gb GPUs in crossfire, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, PCCOOLING 160w TDP air cooler, 60gb Patriot SSD Win 10 boot drive, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  Logitech Wireless Keyboard and Mouse, Roku 55" 4k TV

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 2gb ram tinker toy at the moment.  Running Manjaro at the moment

APU Laptop: I need to clean this things TIM up so it can boot into Windows 7 for more than 5 minute before overheating at idle, it has things, I just haven't been on it in 2 years or so

Link to post
Share on other sites
12 minutes ago, Tristerin said:

Oh no sir, you don't understand.  Im talking sub $50 Cheapo Loop.  Its not about the money at this time but the learning experience.  And the...fun lol.  Pump and Reservoir so far cost me $23 shipped, CPU block with barbs $15, tubing will run me $5-6 for to much, and the radiator I haven't picked yet...lol...likely aluminum 80mm hahahaha.  

 

66% distilled, balance with glycol antifreeze.

Uh, don't do that.

Save up and build a proper loop or stick with air cooling and AIOs.

 

Unless you enjoy spending hundreds of dollars to replace dead PC components.


My sound system costs more than my PC.        Check out my S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Intel i7 4790k | ASUS GTX770 | ASUS Sabertooth Z97 Mark S | Corsair Vengeance Pro 32GB | NZXT S340 | Seasonic Platinum 760 | modded H100i | Ducky ONE White TKL RGB | Logitech MX Master 2S | 2x Samsung 850 Pro 512GB | WD Red 4TB Samsung 58" 4k TV | 2x Behringer NEKKST K8 | BIC Acoustech H-100II | Scarlett 2i4 | 2x AT2020

 

Link to post
Share on other sites
Posted · Original PosterOP
1 minute ago, Enderman said:

Uh, don't do that.

Save up and build a proper loop or stick with air cooling and AIOs.

 

Unless you enjoy spending hundreds of dollars to replace dead PC components.

I have a bi-weekly budget I spend on PC parts...stuff to do with PCs, its a hobby.  Will it leak?  Maybe.  Will it destroy something?  Maybe.  But the odds wont be terrible because I understand how to put it together (mechanic) sans part failure.  Thus the topic.

 

So I guess the answer to your post is:

 

I already do that

 

Yes, especially if I change routes and do it with my FX PC and then can get a new one without wifes disapproval.  Strategy.


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, Custom Loop 2x240mm + 1x120mm radiator, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman ZM-GM1 mouse, Hannspree HF207 and Acer AL2016W monitors

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, 2x Gigabyte HD 7850 2gb GPUs in crossfire, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, PCCOOLING 160w TDP air cooler, 60gb Patriot SSD Win 10 boot drive, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  Logitech Wireless Keyboard and Mouse, Roku 55" 4k TV

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 2gb ram tinker toy at the moment.  Running Manjaro at the moment

APU Laptop: I need to clean this things TIM up so it can boot into Windows 7 for more than 5 minute before overheating at idle, it has things, I just haven't been on it in 2 years or so

Link to post
Share on other sites

For me, it’s being up to 3 or 4 am finishing the build and forgetting something and start filling it. 

 

Forgetting to cap something off or tight down a fitting to a block. 

 

Only real leak I have are from over tightening a fitting into a quality cpu block and from a caps on a reservoir. Not sure what happened to it but started a very small leak out of no where but it wasn’t use for over a year and I have stored it improperly. 


Main RIg Corsair Air 540, I7 8700k, ASUS ROG Strix Z370-H, G.Skill TridentZ 16GB, EVGA 1080 SC, EVGA 850 GQ, Acer KG251Q 1920x1080@240hz 

 

Spare RIg Corsair Air 540, I7 4770K, Asus Maximus VI Extreme, G.Skill Ares 32Gb, EVGA 1060 SSC, Corsair CX850M, Acer xG270HU 2560x1440@144hz

 

 

Link to post
Share on other sites

The most common leaks are normally from either the fittings or from a seal on one of the blocks. Also depending on what your res is made from glycol can cause it to crack and leak.

Link to post
Share on other sites
Posted · Original PosterOP
7 minutes ago, AngryBeaver said:

The most common leaks are normally from either the fittings or from a seal on one of the blocks. Also depending on what your res is made from glycol can cause it to crack and leak.

acrylic, however the more informed I become on mixing in an aluminum radiator the less I think I want to keep this under $50 lol.  


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, Custom Loop 2x240mm + 1x120mm radiator, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman ZM-GM1 mouse, Hannspree HF207 and Acer AL2016W monitors

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, 2x Gigabyte HD 7850 2gb GPUs in crossfire, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, PCCOOLING 160w TDP air cooler, 60gb Patriot SSD Win 10 boot drive, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  Logitech Wireless Keyboard and Mouse, Roku 55" 4k TV

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 2gb ram tinker toy at the moment.  Running Manjaro at the moment

APU Laptop: I need to clean this things TIM up so it can boot into Windows 7 for more than 5 minute before overheating at idle, it has things, I just haven't been on it in 2 years or so

Link to post
Share on other sites
13 hours ago, Tristerin said:

Oh no sir, you don't understand.  Im talking sub $50 Cheapo Loop.  Its not about the money at this time but the learning experience.  And the...fun lol.  Pump and Reservoir so far cost me $23 shipped, CPU block with barbs $15, tubing will run me $5-6 for to much, and the radiator I haven't picked yet...lol...likely aluminum 80mm hahahaha.  

 

66% distilled, balance with glycol antifreeze.

 

Oh...junk.  I saw a few pics of people doing it in open cases with paper down to run the loop for a while (no PC parts inside) to check for leaks which I plan on doing.  But yea...from Junk.  Sourced from the cheapest I can find lol.  Ill do a build log (pump and reservoir...$23 shipped lol)

I’d be a little weary and pressure test stuff outside of the case if I was doing it just I case. I’d still recommend a copper rad and especially something is a larger size since at 80mm you would be looking at the performance of a mid size to small air cooler. 

Link to post
Share on other sites

Not using port extenders in recessed ports is my number one for a slow leak.

 

Apart from that ive cracked acrylic by overtightening a screw too.

 

Both are user error.

Link to post
Share on other sites
12 hours ago, Tristerin said:

acrylic, however the more informed I become on mixing in an aluminum radiator the less I think I want to keep this under $50 lol.  

For 25-35 you can get a copper 240mm radiator from them.

 

It is worth the little bit more for the increased cooling capacity and to take out the risk of galvanic corrosion.

Link to post
Share on other sites
Posted · Original PosterOP
2 hours ago, AngryBeaver said:

For 25-35 you can get a copper 240mm radiator from them.

 

It is worth the little bit more for the increased cooling capacity and to take out the risk of galvanic corrosion.

 

Ive decided to exceed my $50 budget, and go copper radiator and put the GPU on the loop as well, so went ahead and ordered a GPU block for $12.41 shipped from AliExpress last night lol 

 

If I do this in my FX rig, I may also Frankenstein my Corsair H100i GTX and add it into the loop as well.  Two pumps lol. 

3 hours ago, W-L said:

I’d be a little weary and pressure test stuff outside of the case if I was doing it just I case. I’d still recommend a copper rad and especially something is a larger size since at 80mm you would be looking at the performance of a mid size to small air cooler. 

Originally I was going to do this in my HTPC Microtower where that's the only option unless heavy case modification.

 

Im pretty sure I want to do this in my FX case now and go full bore.  Ive only ordered 1 GPU block (will fit in either scenario on the GPUs) and will leave the slave card on air for now (as this PC is at the end of its lifecycle for sure) if I do it in the FX rig.

 

But yes, I will be likely going with 240mm or 200mm square rad made of copper.  Since the radiator will transfer over to future endeavors. 


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, Custom Loop 2x240mm + 1x120mm radiator, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman ZM-GM1 mouse, Hannspree HF207 and Acer AL2016W monitors

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, 2x Gigabyte HD 7850 2gb GPUs in crossfire, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, PCCOOLING 160w TDP air cooler, 60gb Patriot SSD Win 10 boot drive, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  Logitech Wireless Keyboard and Mouse, Roku 55" 4k TV

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 2gb ram tinker toy at the moment.  Running Manjaro at the moment

APU Laptop: I need to clean this things TIM up so it can boot into Windows 7 for more than 5 minute before overheating at idle, it has things, I just haven't been on it in 2 years or so

Link to post
Share on other sites
Posted · Original PosterOP

Since im putting the GPU in the loop now as well, I have a question...

 

Im either going to do this experience on a HD 7750 or HD 7850.  The block is compatible for both (only uncompatible with a few cards on the market actually - at least that's what the specs say lol from Aliexpress). 

 

Should I just use some slim 120mm fans zip tied to the balance of the card?  If I do it on the HD 7850 I wont have to (has 200mm fan pointing at both cards already) I don't think but I don't want to damage the GPU's long term as they are great additions to the parts pile down the road.


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, Custom Loop 2x240mm + 1x120mm radiator, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman ZM-GM1 mouse, Hannspree HF207 and Acer AL2016W monitors

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, 2x Gigabyte HD 7850 2gb GPUs in crossfire, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, PCCOOLING 160w TDP air cooler, 60gb Patriot SSD Win 10 boot drive, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  Logitech Wireless Keyboard and Mouse, Roku 55" 4k TV

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 2gb ram tinker toy at the moment.  Running Manjaro at the moment

APU Laptop: I need to clean this things TIM up so it can boot into Windows 7 for more than 5 minute before overheating at idle, it has things, I just haven't been on it in 2 years or so

Link to post
Share on other sites

Your gonna add the H100 to the loop? Pretty sure that’s aluminum. Kinda going full circle here. 


Main RIg Corsair Air 540, I7 8700k, ASUS ROG Strix Z370-H, G.Skill TridentZ 16GB, EVGA 1080 SC, EVGA 850 GQ, Acer KG251Q 1920x1080@240hz 

 

Spare RIg Corsair Air 540, I7 4770K, Asus Maximus VI Extreme, G.Skill Ares 32Gb, EVGA 1060 SSC, Corsair CX850M, Acer xG270HU 2560x1440@144hz

 

 

Link to post
Share on other sites
Posted · Original PosterOP
3 minutes ago, Mick Naughty said:

Your gonna add the H100 to the loop? Pretty sure that’s aluminum. Kinda going full circle here. 

Thinking out loud in the most appropriate place possible to be corrected if needed - I haven't researched it, and this means that's a no - go if so.  Was hoping that wasn't the case.  At work atm so Ill have to confirm later - thank you for this!

 

Edit - I have the blocks already ordered so its not like I need the block/pump or rad - this actually means I can maximize the case as the top fits larger rads - my wifes going to kill me lol I already told her what I was spending...buttfuckit! lol


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, Custom Loop 2x240mm + 1x120mm radiator, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman ZM-GM1 mouse, Hannspree HF207 and Acer AL2016W monitors

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, 2x Gigabyte HD 7850 2gb GPUs in crossfire, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, PCCOOLING 160w TDP air cooler, 60gb Patriot SSD Win 10 boot drive, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  Logitech Wireless Keyboard and Mouse, Roku 55" 4k TV

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 2gb ram tinker toy at the moment.  Running Manjaro at the moment

APU Laptop: I need to clean this things TIM up so it can boot into Windows 7 for more than 5 minute before overheating at idle, it has things, I just haven't been on it in 2 years or so

Link to post
Share on other sites
Posted · Original PosterOP

Since Im going all copper

 

Cheapest loop fluid?  I don't care about color (yet), just don't want to (have read about) get growth buildup, etc.

 

Distilled water and what additives I would assume?

 

EDIT - Ill likely drain and redo this loop with a new PC upgrade for myself later this year so just looking for cheapest now.  When I do this for a new PC I will get the gud stuffz.


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, Custom Loop 2x240mm + 1x120mm radiator, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman ZM-GM1 mouse, Hannspree HF207 and Acer AL2016W monitors

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, 2x Gigabyte HD 7850 2gb GPUs in crossfire, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, PCCOOLING 160w TDP air cooler, 60gb Patriot SSD Win 10 boot drive, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  Logitech Wireless Keyboard and Mouse, Roku 55" 4k TV

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 2gb ram tinker toy at the moment.  Running Manjaro at the moment

APU Laptop: I need to clean this things TIM up so it can boot into Windows 7 for more than 5 minute before overheating at idle, it has things, I just haven't been on it in 2 years or so

Link to post
Share on other sites
3 hours ago, Tristerin said:

Since Im going all copper

 

Cheapest loop fluid?  I don't care about color (yet), just don't want to (have read about) get growth buildup, etc.

 

Distilled water and what additives I would assume?

 

EDIT - Ill likely drain and redo this loop with a new PC upgrade for myself later this year so just looking for cheapest now.  When I do this for a new PC I will get the gud stuffz.

Juat us the liquid utopia that comes with a box of primo tubing. You will also get an additive for cleaning the rads. The tubing box is like 20 or 25

Link to post
Share on other sites
Posted · Original PosterOP
1 minute ago, AngryBeaver said:

Juat us the liquid utopia that comes with a box of primo tubing. You will also get an additive for cleaning the rads. The tubing box is like 20 or 25

So I was planning on using Brewery tubing which I can get a 3.3 meter strand for $4-5, is the cost of the other items worth getting the bundle or is the primo tubing special compared?  Just curious, forever a newb here.


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, Custom Loop 2x240mm + 1x120mm radiator, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman ZM-GM1 mouse, Hannspree HF207 and Acer AL2016W monitors

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, 2x Gigabyte HD 7850 2gb GPUs in crossfire, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, PCCOOLING 160w TDP air cooler, 60gb Patriot SSD Win 10 boot drive, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  Logitech Wireless Keyboard and Mouse, Roku 55" 4k TV

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 2gb ram tinker toy at the moment.  Running Manjaro at the moment

APU Laptop: I need to clean this things TIM up so it can boot into Windows 7 for more than 5 minute before overheating at idle, it has things, I just haven't been on it in 2 years or so

Link to post
Share on other sites

The cleaner and additive are around 5-7 bucks a peice. But the kits sold for 30+ locally for me. 

Guess it depends on what you expect out of the hose and if that’s worth it. 


Main RIg Corsair Air 540, I7 8700k, ASUS ROG Strix Z370-H, G.Skill TridentZ 16GB, EVGA 1080 SC, EVGA 850 GQ, Acer KG251Q 1920x1080@240hz 

 

Spare RIg Corsair Air 540, I7 4770K, Asus Maximus VI Extreme, G.Skill Ares 32Gb, EVGA 1060 SSC, Corsair CX850M, Acer xG270HU 2560x1440@144hz

 

 

Link to post
Share on other sites
Posted · Original PosterOP
Just now, Mick Naughty said:

The cleaner and additive are around 5-7 bucks a peice. But the kits sold for 30+ locally for me. 

Guess it depends on what you expect out of the hose and if that’s worth it. 

Well my initial thoughts are to keep this cheap af for the experience.  But as Im spending $$$ (I got a decent pump on sale with coupons and reservoir as well, Ive seen it used in many loops its just a no name one however) and talking with you all I would rather spend a little more up front for the experience - for re-usable items in a real loop later.

 

So I figure if I buy good tubing, and only plan on doing this for a short time...the cutting and splicing (shouldn't change actually now as I type this out...my case goes from build to build) may change when the guts of the PC change hopefully later this year. 

 

What I want to avoid is cheap tubing that will split on the barbs.  How many feet come in that box?  Sorry for all the questions, really do appreciate all the answers folks!!!

 

So Im not against getting it...just curious other than the brand why its a go-to I guess - cause if its a lot of hose (can go in parts pile) plus the additives it may be worth getting up front (for the extra hose)


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, Custom Loop 2x240mm + 1x120mm radiator, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman ZM-GM1 mouse, Hannspree HF207 and Acer AL2016W monitors

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, 2x Gigabyte HD 7850 2gb GPUs in crossfire, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, PCCOOLING 160w TDP air cooler, 60gb Patriot SSD Win 10 boot drive, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  Logitech Wireless Keyboard and Mouse, Roku 55" 4k TV

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 2gb ram tinker toy at the moment.  Running Manjaro at the moment

APU Laptop: I need to clean this things TIM up so it can boot into Windows 7 for more than 5 minute before overheating at idle, it has things, I just haven't been on it in 2 years or so

Link to post
Share on other sites

Think the average is 10 feet. 

 

If theres a chance of the hose splitting, you shouldn’t be buying it. No company sells something that bad for pc cooling. 

 

Also id that’s a concern, need to be buying the correct size hose for the fittings.  


Main RIg Corsair Air 540, I7 8700k, ASUS ROG Strix Z370-H, G.Skill TridentZ 16GB, EVGA 1080 SC, EVGA 850 GQ, Acer KG251Q 1920x1080@240hz 

 

Spare RIg Corsair Air 540, I7 4770K, Asus Maximus VI Extreme, G.Skill Ares 32Gb, EVGA 1060 SSC, Corsair CX850M, Acer xG270HU 2560x1440@144hz

 

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Buy VPN

×