Jump to content

Tool Thread!

Lord Mirdalan

I'm curious if other members would like to see a tools thread or sub-forum.

 

Thinking along the lines of anything from buying advice to chronicling rebuilding of old tools to just shooting the breeze.

 

Any other tool-lovers out there? (Insert snickering here).

Screwdriver specs: Long, pointy. Turns things. Some kind of metal.

 

Main rig: 

i9-7900x | Asus X299-Prime | 4x8GB G-Skill TridentZ @3300MHz | Samsung 970 Evo 500GB | Intel 5400S 1TB | Corsair HX1200

 

unRAID server:

Xeon  E5-1630v4 |  Asus X99-E WS | 4x8GB G-Skill DDR4 @2400MHz | Samsung 960 EVO 250GB cache drive | 12TB spinning rust | Corsair RM750X

 

FreeNAS server:

AMD something-or-other | Asus prebuilt sadness | 8GB DDR3-1600 | 9TB magnetic storage | Potential fire threat

 

HTPC:

i7-4790 | GTX1650 | Dell Sadness | 12GB DDR3-1600 | Samsung 860 250GB | 1TB magnetic storage | James Loudspeaker SPL3 x2 | Corsair SF450

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

Ifixit 64 bit set for electronic repair. Milwaukee tools for larger screw drivers. Bosch for ratchets and wrenches. Dewalt for cordless drills. Yeah and other various brands 

ƆԀ S₱▓Ɇ▓cs: i7 6ʇɥפᴉƎ00K (4.4ghz), Asus DeLuxe X99A II, GT҉X҉1҉0҉8҉0 Zotac Amp ExTrꍟꎭe),Si6F4Gb D???????r PlatinUm, EVGA G2 Sǝʌǝᘉ5ᙣᙍᖇᓎᙎᗅᖶt, Phanteks Enthoo Primo, 3TB WD Black, 500gb 850 Evo, H100iGeeTeeX, Windows 10, K70 R̸̢̡̭͍͕̱̭̟̩̀̀̃́̃͒̈́̈́͑̑́̆͘͜ͅG̶̦̬͊́B̸͈̝̖͗̈́, G502, HyperX Cloud 2s, Asus MX34. פN∩SW∀S 960 EVO

Just keeping this here as a backup 9̵̨̢̨̧̧̡̧̡̧̡̧̡̡̢̢̡̢̧̡̢̡̡̢̧̛̛̛̛̛̛̱̖͈̠̝̯̹͉̝̞̩̠̹̺̰̺̲̳͈̞̻̜̫̹̱̗̣͙̻̘͎̲̝͙͍͔̯̲̟̞͚̖̘͉̭̰̣͎͕̼̼̜̼͕͎̣͇͓͓͎̼̺̯͈̤̝͖̩̭͍̣̱̞̬̺̯̼̤̲͎̖̠̟͍̘̭͔̟̗̙̗̗̤̦͍̫̬͔̦̳̗̳͔̞̼̝͍̝͈̻͇̭̠͈̳͍̫̮̥̭͍͔͈̠̹̼̬̰͈̤͚̖̯͍͉͖̥̹̺͕̲̥̤̺̹̹̪̺̺̭͕͓̟̳̹͍̖͎̣̫͓͍͈͕̳̹̙̰͉͙̝̜̠̥̝̲̮̬͕̰̹̳͕̰̲̣̯̫̮͙̹̮͙̮̝̣͇̺̺͇̺̺͈̳̜̣̙̻̣̜̻̦͚̹̩͓͚̖͍̥̟͍͎̦͙̫̜͔̭̥͈̬̝̺̩͙͙͉̻̰̬̗̣͖̦͎̥̜̬̹͓͈͙̤̜̗͔̩̖̳̫̑̀̂̽̈́̈́̿͒̿̋̊͌̾̄̄̒̌͐̽̿̊͑̑̆͗̈̎̄͒̑̋͛̑͑̂͑̀͐̀͑̓͊̇͆̿͑͛͛͆́͆̓̿̇̀̓͑͆͂̓̾̏͊̀̇̍̃́̒̎̀̒̄̓̒̐̑̊̏̌̽̓͂͋̓̐̓͊̌͋̀̐̇̌̓̔͊̈̇́̏͒̋͊̓̆̋̈̀̌̔͆͑̈̐̈̍̀̉̋̈́͊̽͂̿͌͊̆̾̉͐̿̓̄̾͑̈́͗͗̂̂́̇͂̀̈́́̽̈́̓̓͂̽̓̀̄͌̐̔̄̄͒͌̈́̅̉͊̂͒̀̈́̌͂̽̀̑̏̽̀͑̐̐͋̀̀͋̓̅͋͗̍́͗̈́̆̏̇͊̌̏̔̑̐̈́͑̎͑͆̏̎́̑̍̏̒̌̊͘͘̚̕̚̕̕̚̕̚̕̕͜͜͜͜͜͝͝͠͠͝͝͝͝͝͝͝͠͝͝ͅͅͅͅͅͅͅ8̵̨̛̛̛̛̮͍͕̥͉̦̥̱̞̜̫̘̤̖̬͍͇͓̜̻̪̤̣̣̹̑͑̏̈́̐̐́̎͒̔͒̌̑̓̆̓͑̉̈́́͋̌͋͐͛͋̃̍̽̊͗͋͊̂̅͊͑́͋͛̉̏̓͌̾̈́̀͛͊̾͑̌̀̀̌̓̏̑́̄̉̌͂́͛̋͊̄͐͊̈́̀̌̆̎̿̓̔̍̎̀̍̚̕̕͘͘͘̕̚͝͝͠͠͠0̶̡̡̡̢̨̨͕̠̠͉̺̻̯̱̘͇̥͎͖̯͕̖̬̭͔̪̪͎̺̠̤̬̬̤̣̭̣͍̥̱̘̳̣̤͚̭̥͚̦͙̱̦͕̼͖͙͕͇̭͓͉͎̹̣̣͕̜͍͖̳̭͕̼̳̖̩͍͔̱̙̠̝̺̰̦̱̿̄̀͐͜͜ͅͅt̶̡̨̡̨̧̢̧̢̨̧̧̧̧̢̡̨̨̢̨̢̧̢̛̛̛̛̛̠͍̞̮͇̪͉̩̗̗͖̫͉͎͓̮̣̘̫͔̘̬̮̙̯̣͕͓̲̣͓͓̣̹̟͈̱͚̘̼̙̖̖̼̙̜̝͙̣̠̪̲̞̖̠̯̖̠̜̱͉̲̺͙̤̻̦̜͎̙̳̺̭̪̱͓̦̹̺͙̫̖̖̰̣͈͍̜̺̘͕̬̥͇̗̖̺̣̲̫̟̣̜̭̟̱̳̳̖͖͇̹̯̜̹͙̻̥̙͉͕̜͎͕̦͕̱͖͉̜̹̱̦͔͎̲̦͔̖̘̫̻̹̮̗̮̜̰͇̰͔̱͙̞̠͍͉͕̳͍̰̠̗̠̯̜̩͓̭̺̦̲̲͖̯̩̲̣̠͉̦̬͓̠̜̲͍̘͇̳̳͔̼̣͚̙͙͚͕̙̘̣̠͍̟̪̝̲͇͚̦̖͕̰̟̪͖̳̲͉͙̰̭̼̩̟̝̣̝̬̳͎̙̱͒̃̈͊̔͒͗̐̄̌͐͆̍͂̃̈́̾͗̅̐͒̓̆͛̂̾͋̍͂̂̄̇̿̈͌̅̈́̃̾̔̇̇̾̀͊͋̋̌̄͌͆͆̎̓̈́̾̊͊̇̌̔̈́̈́̀̐͊̊̍͑̊̈̓͑̀́̅̀̑̈́̽̃̽͛̇́̐̓̀͆̔̈̀̍̏̆̓̆͒̋́̋̍́̂̉͛̓̓̂̋̎́̒̏̈͋̃̽͆̓̀̔͑̈́̓͌͑̅̽́̐̍̉̑̓̈́͌̋̈́͂̊́͆͂̇̈́̔̃͌̅̈́͌͛̑̐̓̔̈́̀͊͛̐̾͐̔̾̈̃̈̄͑̓̋̇̉̉̚̕̚͘̕̚̚̕̕͜͜͜͜͜͜͜͜͜͜͜͜͜͝͝͝͠͝͝͝͝͝͠ͅͅͅͅͅi̵̢̧̢̧̡̧̢̢̧̢̢̢̡̡̡̧̧̡̡̧̛̛͈̺̲̫͕̞͓̥̖̭̜̫͉̻̗̭̖͔̮̠͇̩̹̱͈̗̭͈̤̠̮͙͇̲͙̰̳̹̲͙̜̟͚͎͓̦̫͚̻̟̰̣̲̺̦̫͓̖̯̝̬͉̯͓͈̫̭̜̱̞̹̪͔̤̜͙͓̗̗̻̟͎͇̺̘̯̲̝̫͚̰̹̫̗̳̣͙̮̱̲͕̺̠͉̫̖̟͖̦͉̟͈̭̣̹̱̖̗̺̘̦̠̯̲͔̘̱̣͙̩̻̰̠͓͙̰̺̠̖̟̗̖͉̞̣̥̝̤̫̫̜͕̻͉̺͚̣̝̥͇̭͎̖̦̙̲͈̲̠̹̼͎͕̩͓̖̥̘̱̜͙̹̝͔̭̣̮̗̞̩̣̬̯̜̻̯̩̮̩̹̻̯̬̖͂̈͂̒̇͗͑̐̌̎̑̽̑̈̈́͑̽́̊͋̿͊͋̅̐̈́͑̇̿̈́̌͌̊̅͂̎͆̏̓͂̈̿̏̃͑̏̓͆̔̋̎̕͘͘͘͜͜͜͜͜͜͜͝͝͠͠ͅͅͅͅͅͅͅͅͅZ̴̧̢̨̢̧̢̢̡̧̢̢̢̨̨̨̡̨̧̢̧̛̛̬̖͈̮̝̭̖͖̗̹̣̼̼̘̘̫̠̭̞͙͔͙̜̠̗̪̠̼̫̻͓̳̟̲̳̻̙̼͇̺͎̘̹̼͔̺̹̬̯̤̮̟͈̭̻͚̣̲͔͙̥͕̣̻̰͈̼̱̺̤̤͉̙̦̩̗͎̞͓̭̞̗͉̳̭̭̺̹̹̮͕̘̪̞̱̥͈̹̳͇̟̹̱̙͚̯̮̳̤͍̪̞̦̳̦͍̲̥̳͇̪̬̰̠͙͕̖̝̫̩̯̱̘͓͎̪͈̤̜͎̱̹̹̱̲̻͎̖̳͚̭̪̦̗̬͍̯̘̣̩̬͖̝̹̣̗̭͖̜͕̼̼̲̭͕͔̩͓̞̝͓͍̗̙̯͔̯̞̝̳̜̜͉̖̩͇̩̘̪̥̱͓̭͎͖̱̙̩̜͎̙͉̟͎͔̝̥͕͍͓̹̮̦̫͚̠̯͓̱͖͔͓̤͉̠͙̋͐̀͌̈́͆̾͆̑̔͂͒̀̊̀͋͑̂͊̅͐̿́̈́̐̀̏̋̃̄͆͒̈́̿̎́́̈̀̀͌̔͋͊̊̉̿͗͊͑̔͐̇͆͛̂̐͊̉̄̈́̄̐͂͂͒͑͗̓͑̓̾̑͋̒͐͑̾͂̎̋̃̽̂̅̇̿̍̈́́̄̍͂͑̏̐̾̎̆̉̾͂̽̈̆̔́͋͗̓̑̕͘̕͘͜͜͜͜͜͝͝͝͝͠͠͝ͅo̶̪͆́̀͂̂́̄̅͂̿͛̈́̿͊͗́͘͝t̴̡̨̧̨̧̡̧̨̡̢̧̢̡̨̛̪͈̣̭̺̱̪̹̺̣̬̖̣̻͈̞̙͇̩̻̫͈̝̭̟͎̻̟̻̝̱͔̝̼͍̞̼̣̘̤̯͓͉̖̠̤͔̜̙͚͓̻͓̬͓̻̜̯̱̖̳̱̗̠̝̥̩͓̗̪̙͓̖̠͎̗͎̱̮̯̮͙̩̫̹̹̖͙̙͖̻͈̙̻͇͔̙̣̱͔̜̣̭̱͈͕̠̹͙̹͇̻̼͎͍̥̘͙̘̤̜͎̟͖̹̦̺̤͍̣̼̻̱̲͎̗̹͉͙̪̞̻̹͚̰̻͈͈͊̈́̽̀̎̃̊́̈́̏̃̍̉̇̑̂̇̏̀͊̑̓͛̽͋̈́͆́̊͊̍͌̈́̓͊̌̿̂̾̐͑̓̀́͒̃̋̓͆̇̀͊̆͗̂͑͐̀͗̅̆͘̕͘̕̕͜͜͝͝͝͝͝͝͝ͅͅͅͅͅͅͅͅͅḁ̶̢̡̨̧̡̡̨̨̧̨̡̡̢̧̨̡̡̛̛̛͍̱̳͚͕̩͍̺̪̻̫̙͈̬͙̖͙̬͍̬̟̣̝̲̼̜̼̺͎̥̮̝͙̪̘̙̻͖͇͚͙̣̬̖̲̲̥̯̦̗̰̙̗̪̞̗̩̻̪̤̣̜̳̩̦̻͓̞̙͍͙̫̩̹̥͚̻̦̗̰̲̙̫̬̱̺̞̟̻͓̞͚̦̘̝̤͎̤̜̜̥̗̱͈̣̻̰̮̼̙͚͚̠͚̲̤͔̰̭̙̳͍̭͎̙͚͍̟̺͎̝͓̹̰̟͈͈̖̺͙̩̯͔̙̭̟̞̟̼̮̦̜̳͕̞̼͈̜͍̮͕̜͚̝̦̞̥̜̥̗̠̦͇͖̳͈̜̮̣͚̲̟͙̎̈́́͊̔̑̽̅͐͐͆̀͐́̓̅̈͑͑̍̿̏́͆͌̋̌̃̒̽̀̋̀̃̏̌́͂̿̃̎̐͊̒̀̊̅͒̎͆̿̈́̑̐̒̀̈́̓̾͋͆̇̋͒̎̈̄̓̂͊̆͂̈́̒̎͐̇̍̆̋̅̿̔͒̄̇̂̋̈́͆̎̔̇͊̊̈́̔̏͋́̀͂̈́̊͋͂̍̾̓͛̇̔̚͘̚̕̚͘͘̕̕̕̚͘͘̚̕̚̕͜͜͜͝͝͝͝͝͝͝͝ͅͅͅͅͅç̵̧̢̨̢̢̢̧̧̡̨̡̢̧̧̧̨̡̡̨̨̢̢̢̧̨̢̨̢̛̛͉̗̠͇̹̖̝͕͚͎̟̻͓̳̰̻̺̞̣͚̤͙͍͇̗̼͖͔͕͙͖̺͙̖̹̘̘̺͓̜͍̣̰̗̖̺̗̪̘̯̘͚̲͚̲̬̞̹̹͕̭͔̳̘̝̬͉̗̪͉͕̞̫͔̭̭̜͉͔̬̫͙̖̙͚͔͙͚͍̲̘͚̪̗̞̣̞̲͎͔͖̺͍͎̝͎͍̣͍̩̟͈͕̗͉̪̯͉͎͖͍̖͎̖̯̲̘̦̟̭͍͚͓͈͙̬͖̘̱̝̜̘̹̩̝̥̜͎̬͓̬͙͍͇͚̟̫͇̬̲̥̘̞̘̟̘̝̫͈̙̻͇͎̣̪̪̠̲͓͉͙͚̭̪͇̯̠̯̠͖̞̜͓̲͎͇̼̱̦͍͉͈͕͉̗̟̖̗̱̭͚͎̘͓̬͍̱͍̖̯̜̗̹̰̲̩̪͍̞̜̫̩̠͔̻̫͍͇͕̰̰̘͚͈̠̻̮͊̐̿̏̐̀̇̑̐̈͛͑͑̍̑̔̃̈́̓̈́̇̐͑̐̊̆͂̀̏͛̊̔̍̽͗͋̊̍̓̈́̏̅͌̀̽́̑͒͒̓͗̈́̎͌͂̕̚͘͘͜͜͜͜͜͠͝͝͝͝ͅͅͅͅͅͅͅS̵̡̡̧̧̨̨̡̢̡̡̡̡̧̧̡̧̢̫̯͔̼̲͉͙̱̮̭̗͖̯̤͙̜͚̰̮̝͚̥̜̞̠̤̺̝͇̻̱͙̩̲̺͍̳̤̺̖̝̳̪̻̗̮̪̖̺̹̭͍͇̗̝̱̻̳̝̖̝͎̙͉̞̱̯̙̜͇̯̻̞̱̭̗͉̰̮̞͍̫̺͙͎̙̞̯̟͓͉̹̲͖͎̼̫̩̱͇̲͓̪͉̺̞̻͎̤̥̭̺̘̻̥͇̤̖̰̘̭̳̫̙̤̻͇̪̦̭̱͎̥̟͖͕̣̤̩̟̲̭̹̦̹̣͖̖͒̈́̈́̓͗̈̄͂̈́̅̐̐̿̎̂͗̎̿̕͘͜͜͜͜͝͝ͅͅt̸̡̡̧̧̨̡̢̛̥̥̭͍̗͈̩͕͔͔̞̟͍̭͇̙̺̤͚͎͈͎͕̱͈̦͍͔͓̬͚̗̰̦͓̭̰̭̎̀̂̈́̓̒̈́̈́̂̄̋́̇̂͐͒̋̋̉͐̉̏̇͋̓̈́͐̾͋̒͒͐̊̊̀̄͆̄͆̑͆̇̊̓̚̚̕̚̕͜͠͝͝ͅͅơ̵̡̨̡̡̡̨̛̺͕̼͔̼̪̳͖͓̠̘̘̳̼͚͙͙͚̰͚͚͖̥̦̥̘̖̜̰͔̠͕̦͎̞̮͚͕͍̤̠̦͍̥̝̰̖̳̫̮̪͇̤̱̜͙͔̯͙̙̼͇̹̥̜͈̲̺̝̻̮̬̼̫̞̗̣̪̱͓̺̜̠͇͚͓̳̹̥̳̠͍̫͈̟͈̘̯̬̞͔̝͍͍̥̒̐͗͒͂͆̑̀̿̏́̀͑͗̐́̀̾̓́̌̇̒̈́̌̓͐̃̈́̒̂̀̾͂̊̀̂͐̃̄̓̔̽̒̈́̇̓͌̇̂̆̒̏̊̋͊͛͌̊̇̒̅͌̄̎̔̈́͊́̽̋̈̇̈́́͊̅͂̎̃͌͊͛͂̄̽̈́̿͐̉̽̿́́̉͆̈́̒́̂̾̄̇̌̒̈̅̍̿̐͑̓͊̈́̈̋̈́̉̍̋̊̈̀̈́̾̿̌̀̈́͌̑̍́̋̒̀̂̈́́̾̏̐̅̈̑͗͐̈͂̄̾̄̈́̍̉͑͛͗͋̈́̃̄̊́́͐̀̀̽̇̓̄̓̃͋͋̂̽̔̀̎͌̈́̈́̑̓̔̀̓͐͛͆̿̋͑͛̈́͂̅̋̅͆͗̇́̀̒́̏͒̐̍͂̓͐͐̇̂̉̑̊͑̉̋̍͊̄̀͂̎͒̔͊̃̏̕̚̕̕͘͘͘̚͘̚͘̕͘̚͘̚̚̚̕͘͜͜͜͝͝͠͠͝͝͠͠͝͝͝͝͝͝͝͝͝ͅͅͅc̴̨̡̢̢̢̡̡̢̛̛̛̻͇̝̣͉͚͎͕̻̦͖̤̖͇̪̩̤̻̭̮̙̰̖̰̳̪̱̹̳̬͖̣͙̼̙̰̻̘͇͚̺̗̩̫̞̳̼̤͔͍͉̟͕̯̺͈̤̰̹̍̋́͆̾̆̊͆͋̀͑͒̄̿̄̀̂͋̊͆́͑̑̽͊̓́̔̽̌͊̄͑͒͐̑͗̿̃̀̓̅́̿͗̈́͌̋̀̏̂͌̓́̇̀͒͋̌̌̅͋͌̆͐̀̔̒͐̊̇̿̽̀̈́̃̒̋̀̈́̃̏̂̊͗̑̊̈̇̀̌͐̈́̉̂̏͊̄͐̈̽͒̏̒̓́̌̓̅́̓̃͐͊͒̄͑̒͌̍̈́̕͘̚͘̕͘̚̕͜͝͠͝͝͝ͅǩ̴̢̢̢̧̨̢̢̢̨̨̨̢̢̢̨̧̨̡̡̢̛̛̛̛̛̛̛̜̥̩̙͕̮̪̻͈̘̯̼̰̜͚̰͖̬̳͖̣̭̼͔̲͉̭̺͚̺̟͉̝̱̲͎͉̙̥̤͚͙̬̪̜̺͙͍̱̞̭̬̩̖̤̹̤̺̦͈̰̗̰͍͇̱̤̬̬͙̙̲̙̜͖͓̙̟̙̯̪͍̺̥͔͕̝̳̹̻͇̠̣͈̰̦͓͕̩͇͈͇̖͙͍̰̲̤̞͎̟̝̝͈͖͔͖̦̮̗̬̞̞̜̬̠̹̣̣̲̮̞̤̜̤̲̙͔͕̯͔͍̤͕̣͔͙̪̫̝̣̰̬̬̭̞͔̦̟̥̣̻͉͈̮̥̦̮̦͕̤͇̺͆͆̈͗̄̀̌̔̈́̈̉̾̊̐̆̂͛̀̋́̏̀̿͒̓̈́̈́͂̽̾͗͊̋̐̓̓̀̃̊̊͑̓̈̎̇͑̆̂̉̾̾̑͊̉̃́̑͌̀̌̐̅̃̿̆̎̈́̀̒́͛̓̀̊́̋͛͒͊̆̀̃̊͋̋̾̇̒̋͂̏͗͆̂̔́̐̀́͗̅̈̋̂̎̒͊̌̉̈̈́͌̈́̔̾̊̎́͐͒̋̽̽́̾̿̚̕͘͘̚̕̕̕̚̚̕̚̕͘͜͜͜͝͠͝͝͝͝͝͝͝͝ͅͅͅͅͅͅB̸̢̧̨̡̢̧̨̡̡̨̡̨̡̡̡̢̨̢̨̛̛̛̛̛̛͉̞͚̰̭̲͈͎͕͈̦͍͈̮̪̤̻̻͉̫̱͔̞̫̦̰͈̗̯̜̩̪̲̻̖̳͖̦͎͔̮̺̬̬̼̦̠̪̤͙͍͓̜̥̙̖̫̻̜͍̻̙̖̜̹͔̗̪̜̖̼̞̣̠̫͉̯̮̤͈͎̝̪͎͇͙̦̥͙̳̫̰̪̣̱̘̤̭̱͍̦͔̖͎̺̝̰̦̱̣͙̙̤͚̲͔̘̱̜̻͔̥̻͖̭͔̜͉̺͕͙͖̜͉͕̤͚̠̩̮̟͚̗͈͙̟̞̮̬̺̻̞͔̥͉͍̦̤͓̦̻̦̯̟̰̭̝̘̩̖̝͔̳͉̗̖̱̩̩̟͙͙͛̀͐̈́̂̇͛̅̒̉̏̈́̿͐́̏̃̏̓̌̽͐̈́͛̍͗͆͛̋̔̉͂̔̂̓̌͌͋̂͆̉͑̊̎́̈́̈̂͆͑́̃̍̇̿̅̾́́̿̅̾̆̅̈́̈̓͒͌͛̃͆̋͂̏̓̅̀͂̽̂̈̈́̎̾̐͋͑̅̍̈́̑̅̄͆̓̾̈́͐̎̊͐̌̌̓͊̊̔̈́̃͗̓͊͐̌͆̓͗̓̓̾̂̽͊͗́́́̽͊͆͋͊̀̑̿̔͒̏̈́́̏͆̈́͋̒͗͂̄̇̒͐̃͑̅̍͒̎̈́̌̋́̓͂̀̇͛̋͊͆̈́̋́̍̃͒̆̕̚̚̕̕̕͘̕̚̚͘̕͜͜͜͜͝͠͠͝͠͝͝͝͝͠͝͝͝͝ͅͅͅͅͅI̵̡̢̧̨̡̢̨̡̡̢̡̧̡̢̢̢̡̢̛̛͕͎͕̩̠̹̩̺̣̳̱͈̻̮̺̟̘̩̻̫͖̟͓̩̜̙͓͇̙̱̭̰̻̫̥̗̠͍͍͚̞̘̫͉̬̫̖̖̦͖͉̖̩̩̖̤̺̥̻̝͈͎̻͓̟̹͍̲͚͙̹̟̟̯͚̳̟͕̮̻̟͈͇̩̝̼̭̯͚͕̬͇̲̲̯̰̖̙̣̝͇̠̞̙͖͎̮̬̳̥̣̺̰͔̳̳̝̩̤̦̳̞̰̩̫̟͚̱̪̘͕̫̼͉̹̹̟̮̱̤̜͚̝̠̤̖̮̯̳͖̗̹̞̜̹̭̿̏͋̒͆̔̄̃̾̓͛̾̌́̅̂͆̔͌͆͋̔̾́̈̇̐̄̑̓̂̾́̄̿̓̅̆͌̉̎̏̄͛̉͆̓̎͒͘̕̕͜͜͜͜͜͜͜͝͠ͅͅƠ̷̢̛̛̛̛̛̛̛̛̟̰͔͔͇̲̰̮̘̭̭̖̥̟̘̠̬̺̪͇̲͋͂̅̈́̍͂̽͗̾͒̇̇̒͐̍̽͊́̑̇̑̾̉̓̈̾͒̍̌̅̒̾̈́̆͌̌̾̎̽̐̅̏́̈̔͛̀̋̃͊̒̓͗͒̑͒̃͂̌̄̇̑̇͛̆̾͛̒̇̍̒̓̀̈́̄̐͂̍͊͗̎̔͌͛̂̏̉̊̎͗͊͒̂̈̽̊́̔̊̃͑̈́̑̌̋̓̅̔́́͒̄̈́̈̂͐̈̅̈̓͌̓͊́̆͌̉͐̊̉͛̓̏̓̅̈́͂̉̒̇̉̆̀̍̄̇͆͛̏̉̑̃̓͂́͋̃̆̒͋̓͊̄́̓̕̕̕̚͘͘͘̚̕̚͘̕̕͜͜͝͝͝͠͝͝͝͝͠ͅS̷̢̨̧̢̡̨̢̨̢̨̧̧̨̧͚̱̪͇̱̮̪̮̦̝͖̜͙̘̪̘̟̱͇͎̻̪͚̩͍̠̹̮͚̦̝̤͖̙͔͚̙̺̩̥̻͈̺̦͕͈̹̳̖͓̜͚̜̭͉͇͖̟͔͕̹̯̬͍̱̫̮͓̙͇̗̙̼͚̪͇̦̗̜̼̠͈̩̠͉͉̘̱̯̪̟͕̘͖̝͇̼͕̳̻̜͖̜͇̣̠̹̬̗̝͓̖͚̺̫͛̉̅̐̕͘͜͜͜͜ͅͅͅ.̶̨̢̢̨̢̨̢̛̻͙̜̼̮̝̙̣̘̗̪̜̬̳̫̙̮̣̹̥̲̥͇͈̮̟͉̰̮̪̲̗̳̰̫̙͍̦̘̠̗̥̮̹̤̼̼̩͕͉͕͇͙̯̫̩̦̟̦̹͈͔̱̝͈̤͓̻̟̮̱͖̟̹̝͉̰͊̓̏̇͂̅̀̌͑̿͆̿̿͗̽̌̈́̉̂̀̒̊̿͆̃̄͑͆̃̇͒̀͐̍̅̃̍̈́̃̕͘͜͜͝͠͠z̴̢̢̡̧̢̢̧̢̨̡̨̛̛̛̛̛̛̛̛̲͚̠̜̮̠̜̞̤̺͈̘͍̻̫͖̣̥̗̙̳͓͙̫̫͖͍͇̬̲̳̭̘̮̤̬̖̼͎̬̯̼̮͔̭̠͎͓̼̖̟͈͓̦̩̦̳̙̮̗̮̩͙͓̮̰̜͎̺̞̝̪͎̯̜͈͇̪̙͎̩͖̭̟͎̲̩͔͓͈͌́̿͐̍̓͗͑̒̈́̎͂̋͂̀͂̑͂͊͆̍͛̄̃͌͗̌́̈̊́́̅͗̉͛͌͋̂̋̇̅̔̇͊͑͆̐̇͊͋̄̈́͆̍̋̏͑̓̈́̏̀͒̂̔̄̅̇̌̀̈́̿̽̋͐̾̆͆͆̈̌̿̈́̎͌̊̓̒͐̾̇̈́̍͛̅͌̽́̏͆̉́̉̓̅́͂͛̄̆͌̈́̇͐̒̿̾͌͊͗̀͑̃̊̓̈̈́̊͒̒̏̿́͑̄̑͋̀̽̀̔̀̎̄͑̌̔́̉̐͛̓̐̅́̒̎̈͆̀̍̾̀͂̄̈́̈́̈́̑̏̈́̐̽̐́̏̂̐̔̓̉̈́͂̕̚̕͘͘̚͘̚̕̚̚̚͘̕̕̕͜͜͝͠͠͝͝͝͝͠͝͝͝͠͝͝͝͝͝͝ͅͅͅī̸̧̧̧̡̨̨̢̨̛̛̘͓̼̰̰̮̗̰͚̙̥̣͍̦̺͈̣̻͇̱͔̰͈͓͖͈̻̲̫̪̲͈̜̲̬̖̻̰̦̰͙̤̘̝̦̟͈̭̱̮̠͍̖̲͉̫͔͖͔͈̻̖̝͎̖͕͔̣͈̤̗̱̀̅̃̈́͌̿̏͋̊̇̂̀̀̒̉̄̈́͋͌̽́̈́̓̑̈̀̍͗͜͜͠͠ͅp̴̢̢̧̨̡̡̨̢̨̢̢̢̨̡̛̛͕̩͕̟̫̝͈̖̟̣̲̖̭̙͇̟̗͖͎̹͇̘̰̗̝̹̤̺͉͎̙̝̟͙͚̦͚͖̜̫̰͖̼̤̥̤̹̖͉͚̺̥̮̮̫͖͍̼̰̭̤̲͔̩̯̣͖̻͇̞̳̬͉̣̖̥̣͓̤͔̪̙͎̰̬͚̣̭̞̬͎̼͉͓̮͙͕̗̦̞̥̮̘̻͎̭̼͚͎͈͇̥̗͖̫̮̤̦͙̭͎̝͖̣̰̱̩͎̩͎̘͇̟̠̱̬͈̗͍̦̘̱̰̤̱̘̫̫̮̥͕͉̥̜̯͖̖͍̮̼̲͓̤̮͈̤͓̭̝̟̲̲̳̟̠͉̙̻͕͙̞͔̖͈̱̞͓͔̬̮͎̙̭͎̩̟̖͚̆͐̅͆̿͐̄̓̀̇̂̊̃̂̄̊̀͐̍̌̅͌̆͊̆̓́̄́̃̆͗͊́̓̀͑͐̐̇͐̍́̓̈́̓̑̈̈́̽͂́̑͒͐͋̊͊̇̇̆̑̃̈́̎͛̎̓͊͛̐̾́̀͌̐̈́͛̃̂̈̿̽̇̋̍͒̍͗̈͘̚̚͘̚͘͘͜͜͜͜͜͜͠͠͝͝ͅͅͅ☻♥■∞{╚mYÄÜXτ╕○\╚Θº£¥ΘBM@Q05♠{{↨↨▬§¶‼↕◄►☼1♦  wumbo╚̯̪̣͕̙̩̦͓͚̙̱̘̝̏̆ͤ̊̅ͩ̓̏̿͆̌Θ̼̯͉ͭͦ̃͊͑̉ͯͤ̈́ͬ͐̈́͊ͤͅº͍̪͇͖̝̣̪̙̫̞̦̥ͨ̂ͧ̄̿£̺̻̹̠̯͙͇̳ͬ̃̿͑͊ͨͣ╚̯̪̣͕̙̩̦͓͚̙̱̘̝̏̆ͤ̊̅ͩ̓̏̿͆̌Θ̼̯͉ͭͦ̃͊͑̉ͯͤ̈́ͬ͐̈́͊ͤͅº͍̪͇͖̝̣̪̙̫̞̦̥ͨ̂ͧ̄̿£̺̻̹̠̯͙͇̳ͬ̃̿͑͊ͨͣ╚̯̪̣͕̙̩̦͓͚̙̱̘̝̏̆ͤ̊̅ͩ̓̏̿͆̌Θ̼̯͉ͭͦ̃͊͑̉ͯͤ̈́ͬ͐̈́͊ͤͅº͍̪͇͖̝̣̪̙̫̞̦̥ͨ̂ͧ̄̿£̺̻̹̠̯͙͇̳ͬ̃̿͑͊ͨͣ╚̯̪̣͕̙̩̦͓͚̙̱̘̝̏̆ͤ̊̅ͩ̓̏̿͆̌Θ̼̯͉ͭͦ̃͊͑̉ͯͤ̈́ͬ͐̈́͊ͤͅº͍̪͇͖̝̣̪̙̫̞̦̥ͨ̂ͧ̄̿£̺̻̹̠̯͙͇̳ͬ̃̿͑͊ͨͣ╚̯̪̣͕̙̩̦͓͚̙̱̘̝̏̆ͤ̊̅ͩ̓̏̿͆̌Θ̼̯͉ͭͦ̃͊͑̉ͯͤ̈́ͬ͐̈́͊ͤͅº͍̪͇͖̝̣̪̙̫̞̦̥ͨ̂ͧ̄̿£̺̻̹̠̯͙͇̳ͬ̃̿͑͊ͨͣ╚̯̪̣͕̙̩̦͓͚̙̱̘̝̏̆ͤ̊̅ͩ̓̏̿͆̌Θ̼̯͉ͭͦ̃͊͑̉ͯͤ̈́ͬ͐̈́͊ͤͅº͍̪͇͖̝̣̪̙̫̞̦̥ͨ̂ͧ̄̿£̺̻̹̠̯͙͇̳ͬ̃̿͑͊ͨͣ╚̯̪̣͕̙̩̦͓͚̙̱̘̝̏̆ͤ̊̅ͩ̓̏̿͆̌Θ̼̯͉ͭͦ̃͊͑̉ͯͤ̈́ͬ͐̈́͊ͤͅº͍̪͇͖̝̣̪̙̫̞̦̥ͨ̂ͧ̄̿£̺̻̹̠̯͙͇̳ͬ̃̿͑͊ͨͣ╚̯̪̣͕̙̩̦͓͚̙̱̘̝̏̆ͤ̊̅ͩ̓̏̿͆̌Θ̼̯͉ͭͦ̃͊͑̉ͯͤ̈́ͬ͐̈́͊ͤͅº͍̪͇͖̝̣̪̙̫̞̦̥ͨ̂ͧ̄̿£̺̻̹̠̯͙͇̳ͬ̃̿͑͊ͨͣ╚̯̪̣͕̙̩̦͓͚̙̱̘̝̏̆ͤ̊̅ͩ̓̏̿͆̌Θ̼̯͉ͭͦ̃͊͑̉ͯͤ̈́ͬ͐̈́͊ͤͅº͍̪͇͖̝̣̪̙̫̞̦̥ͨ̂ͧ̄̿£̺̻̹̠̯͙͇̳ͬ̃̿͑͊ͨͣ╚̯̪̣͕̙̩̦͓͚̙̱̘̝̏̆ͤ̊̅ͩ̓̏̿͆̌Θ̼̯͉ͭͦ̃͊͑̉ͯͤ̈́ͬ͐̈́͊ͤͅº͍̪͇͖̝̣̪̙̫̞̦̥ͨ̂ͧ̄̿£̺̻̹̠̯͙͇̳ͬ̃̿͑͊ͨͣ╚̯̪̣͕̙̩̦͓͚̙̱̘̝̏̆ͤ̊̅ͩ̓̏̿͆̌Θ̼̯͉ͭͦ̃͊͑̉ͯͤ̈́ͬ͐̈́͊ͤͅº͍̪͇͖̝̣̪̙̫̞̦̥ͨ̂ͧ̄̿£̺̻̹̠̯͙͇̳ͬ̃̿͑͊ͨͣ╚̯̪̣͕̙̩̦͓͚̙̱̘̝̏̆ͤ̊̅ͩ̓̏̿͆̌Θ̼̯͉ͭͦ̃͊͑̉ͯͤ̈́ͬ͐̈́͊ͤͅº͍̪͇͖̝̣̪̙̫̞̦̥ͨ̂ͧ̄̿£̺̻̹̠̯͙͇̳ͬ̃̿͑͊ͨͣ╚̯̪̣͕̙̩̦͓͚̙̱̘̝̏̆ͤ̊̅ͩ̓̏̿͆̌Θ̼̯͉ͭͦ̃͊͑̉ͯͤ̈́ͬ͐̈́͊ͤͅº͍̪͇͖̝̣̪̙̫̞̦̥ͨ̂ͧ̄̿£̺̻̹̠̯͙͇̳ͬ̃̿͑͊ͨͣ╚̯̪̣͕̙̩̦͓͚̙̱̘̝̏̆ͤ̊̅ͩ̓̏̿͆̌Θ̼̯͉ͭͦ̃͊͑̉ͯͤ̈́ͬ͐̈́͊ͤͅº͍̪͇͖̝̣̪̙̫̞̦̥ͨ̂ͧ̄̿£̺̻̹̠̯͙͇̳ͬ̃̿͑͊ͨͣ╚̯̪̣͕̙̩̦͓͚̙̱̘̝̏̆ͤ̊̅ͩ̓̏̿͆̌Θ̼̯͉ͭͦ̃͊͑̉ͯͤ̈́ͬ͐̈́͊ͤͅº͍̪͇͖̝̣̪̙̫̞̦̥ͨ̂ͧ̄̿£̺̻̹̠̯͙͇̳ͬ̃̿͑͊ͨͣ

Link to comment
Share on other sites

Link to post
Share on other sites

I'm an auto tech so I got quite the assortment. Last inventory I did was about $13k and that was only my service cart. Not my main tool box

 

Recent purchase is a Milwaukee m12 dremel looking tool. Lasted about 30 seconds on mid speed cutting through plastic before it drained the battery. Hoping a drain and recharge improves it, but not a good initial impression. 

5800X3D / ASUS X570 Dark Hero / 32GB 3600mhz / EVGA RTX 3090ti FTW3 Ultra / Dell S3422DWG / Logitech G815 / Logitech G502 / Sennheiser HD 599

2021 Razer Blade 14 3070 / S23 Ultra

Link to comment
Share on other sites

Link to post
Share on other sites

Nearly everything is a tool.

Truck? Tool to carry heavy things long distances.

Fork? Tool to transport food from plate to mouth.

Gun? Tool to kill that which is actively trying to kill you.

Come Bloody Angel

Break off your chains

And look what I've found in the dirt.

 

Pale battered body

Seems she was struggling

Something is wrong with this world.

 

Fierce Bloody Angel

The blood is on your hands

Why did you come to this world?

 

Everybody turns to dust.

 

Everybody turns to dust.

 

The blood is on your hands.

 

The blood is on your hands!

 

Pyo.

Link to comment
Share on other sites

Link to post
Share on other sites

27 minutes ago, vetali said:

I'm an auto tech so I got quite the assortment. Last inventory I did was about $13k and that was only my service cart. Not my main tool box

 

Recent purchase is a Milwaukee m12 dremel looking tool. Lasted about 30 seconds on mid speed cutting through plastic before it drained the battery. Hoping a drain and recharge improves it, but not a good initial impression. 

Don't get me started on my STHL electric weedeater. Works great for 10 minutes then cuts out every 5 minutes of overheating. The leafblower and the tree trimmer is the only electric tools worth getting IMO. I do a lot of weedeating so its quite annoying and I usually give up.

 

I have a lot of tools but probably my favourite is my MechPro tool set. I use it for so much and just keep it in my car. 

Link to comment
Share on other sites

Link to post
Share on other sites

6 minutes ago, RorzNZ said:

Don't get me started on my STHL electric weedeater. Works great for 10 minutes then cuts out every 5 minutes of overheating. The leafblower and the tree trimmer is the only electric tools worth getting IMO. I do a lot of weedeating so its quite annoying and I usually give up.

 

I have a lot of tools but probably my favourite is my MechPro tool set. I use it for so much and just keep it in my car. 

Not sold on electric lawn equipment yet for that reason, overheating. It'll get better eventually, just as the battery tools took a while to overtake air tools. 

5800X3D / ASUS X570 Dark Hero / 32GB 3600mhz / EVGA RTX 3090ti FTW3 Ultra / Dell S3422DWG / Logitech G815 / Logitech G502 / Sennheiser HD 599

2021 Razer Blade 14 3070 / S23 Ultra

Link to comment
Share on other sites

Link to post
Share on other sites

Software tools would go in programs and feautures. 

 

Hardware could be interesting. Linus has noted he uses ifixit. Hardware modding and cases might be a good place for this. 

Link to comment
Share on other sites

Link to post
Share on other sites

On 1/27/2019 at 3:29 PM, Drak3 said:

Nearly everything is a tool.

Truck? Tool to carry heavy things long distances.

Fork? Tool to transport food from plate to mouth.

Gun? Tool to kill that which is actively trying to kill you.

Right... Nearly every mechanical thing can be a tool. And some people.

 

 

I was thinking more along the lines of "traditional" tools, but I'd be happy to see any kind of positive interaction between members.

inhkx64iat711.jpg

Screwdriver specs: Long, pointy. Turns things. Some kind of metal.

 

Main rig: 

i9-7900x | Asus X299-Prime | 4x8GB G-Skill TridentZ @3300MHz | Samsung 970 Evo 500GB | Intel 5400S 1TB | Corsair HX1200

 

unRAID server:

Xeon  E5-1630v4 |  Asus X99-E WS | 4x8GB G-Skill DDR4 @2400MHz | Samsung 960 EVO 250GB cache drive | 12TB spinning rust | Corsair RM750X

 

FreeNAS server:

AMD something-or-other | Asus prebuilt sadness | 8GB DDR3-1600 | 9TB magnetic storage | Potential fire threat

 

HTPC:

i7-4790 | GTX1650 | Dell Sadness | 12GB DDR3-1600 | Samsung 860 250GB | 1TB magnetic storage | James Loudspeaker SPL3 x2 | Corsair SF450

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

I usually use Stanley and Makita tools since they're usually pretty reliable.

My dad's had a Makita drill for about 15-20 years now and the only problem has been the battery (but that's fairly easy to fix).

 

Link to comment
Share on other sites

Link to post
Share on other sites

I wouldn't mind having a dedicated tool thread where we can discuss and show off our toys tools.

 

For portable power tools, I have a herd of 18v Ryobis, some dating back around 20 years or so. What I like most about Ryobi is it has amintained ininterchangeability of it's tools and batteries over the decades. Old Ryobi tools work with today's batteries and vice versa. My tools don't get heavy enough usage, like, say, a contractor would, to justify more expensive ones. The only Ryobi 18v tool I didn't like were their earlier jigsaws. They just couldn't hold a blade straight. The newest, brushless model finally has a chuck that holds a blade about as straight as one can expect.

 

For someone who is just starting out with 18v power tools, however, I would suggest Ridgid becasue of their lifetime warranty. Both Ridgid and Ryobi are made by the same manufacturer.

 

Some of my tools are older than I am. I have quite a few I got from my Daddy, one of which also belonged to my paternal grandfather (an out of square framing square that I will never part with even though I use a newer one).  Daddy also had a drawknife that belonged to my maternal grandfather but that disappeared, along with a bunch of other tools when my sister, brother-in-law, and I were going through things before the estate sale. Daddy had dementia and I suspect he loand out tools to "friends" who forgot to return them (it's also possible a certain neighbor filtched many of them although it couldn't be proved).

 

I'm a regular tool whore although I don't buy tools unless I'm actually going to use them. Tools stores are like candy stores for me. I used to be a cabinet maker and also had some machine shop and welding training back in college (Daddy was a machinist--tool and die maker and model maker--and a diehard DIYer so I picked up my love of tools and some of my skills from him). I've had almost 70 years to be collecting tools.

Jeannie

 

As long as anyone is oppressed, no one will be safe and free.

One has to be proactive, not reactive, to ensure the safety of one's data so backup your data! And RAID is NOT a backup!

 

Link to comment
Share on other sites

Link to post
Share on other sites

1 hour ago, 1kv said:

I usually use Stanley and Makita tools since they're usually pretty reliable.

My dad's had a Makita drill for about 15-20 years now and the only problem has been the battery (but that's fairly easy to fix).

 

Love my Makita, got a new one a while go, not as good as my corded one, but works a treat.

 

Not like my Briggs and Stratton President lawnmower, or my STHL lawnmower, those suck bad! My fav lawnmower is easily my trusty John Deere. 

Link to comment
Share on other sites

Link to post
Share on other sites

I've got a variety of tools I use for work. Recently upgraded some screwdrivers, nut drivers to Klein tools. Very good tools and worth the money IMO. I also use a Fluke Multi Meter and I do have some other cheaper tools as well. Can't remember all brand names. Some of it is from harbor freight.

 

For cordless power tools I use Ryobi at home and at work I got the drill from harbor freight. Forgot what it's called lol

Main Rig CPU: AMD Ryzen 7 5700x GPU: Asus TUF Gaming RX5700XT MBASUS AM4 TUF Gaming X570-Plus RAM: 64GB Corsair Dominator Platinum 3200 CPU Cooler: Cooler Master Master Liquid LC240E SSD: Crucial 250gb M.2 + Crucial 500gb SSD HDD: PSU: Thermaltake Toughpower Gran RGB 850W 80+ Gold Case: Corsair Carbide 275R KB: Glorious GMMK 85% MOUSE: Razer Naga Trinity HEADSET: Go XLR with Shure SM7B mic and beyerdynamic DT 990

 

unRAID Plex Server CPU: Intel i7 6700 GPU: Nvidia Quadro P2000 MB: Asus B150M-C RAM: Crucial Ballistix 32gb DDR4 3000MT/s CPU Cooler: Stock Intel SSD: Western Digital 500GB Red HDD: 4TB Seagate Baracude 3x 4TB Seagate Ironwolf PSU: EVGA BT 80+ Bronze 450W Case: Cooler Master HAF XB EVO KB: Cheap Logitech KB + Mouse combo

Link to comment
Share on other sites

Link to post
Share on other sites

I doubt there is enough interest for a sub-forum for just tools, but I think it could fit into the Workbench section somehow... Case Modding and Hobby Electronics both end up being a little tool related, would be kind of nice to have a section for Tools and how to use them, and a lot of threads from those two sub-forums would fit into it.

 

Currently my tool project is to replace all my main tools with Knipex, about halfway through just buying them when they go on sale. Around 10 years ago Lowes tried to sell Knipex and no one bought them due to the cost and they were clearanced out. I had no idea what they were but figured for a few bucks I may as well grab a few pairs here and there... in hindsight I should have bought every single one. Just about all of their tools are perfect, and my favorite part is the oldschool dipped handles that actually hold up. Channellock still has the dipped handles, but they'd either slide off or start to get gummy from oils and solvents.

 

As for old tools, I have a small assortment of hand tools, but my favorite old tool is this saw. Every time I use it I try to spend an hour or two cleaning it up some more, eventually I want to get around to repainting the red pieces.

 

IMG_20151118_211920544.jpg.fec24ebfa66959bc499a2ff5e00e8275.jpg

 

And on the subject of saws, just picked this up last month. I've really been wanting a sliding saw, but my bench for it will end up being against a wall so a normal slider wouldn't work with the slides sticking out the back. This one has two folding arms for the slide part so it barely takes up any more depth than a standard miter saw. With a riser block, it can cut up to 18" wide boards. So far the only downsides I've found are a odd size dust port, and it looks like they started to implement a shadowline guide on it, but never put the electronics in it... so must have found that is patented or something, sure would have been nice tho. There are a few Youtube videos of people making their own that I'll have to try at some point.

IMG_20181228_202311.jpg.12350c74a16ac0908dc4b3e27e08d941.jpg

 

7 hours ago, Lady Fitzgerald said:

For someone who is just starting out with 18v power tools, however, I would suggest Ridgid becasue of their lifetime warranty. Both Ridgid and Ryobi are made by the same manufacturer.

Same company also owns Milwaukee. As for the lifetime warranty, don't actually expect to use it more than a few times. Sales person had my family talked into how amazing Ridgid was, so between several people in the family/company we bought 10 or so kits. A few years in and I don't think a single tool out of ~50 was still working, they refused to warranty anything after a few claims and started giving us a huge run-around where first it had to be in store (Home Depot), then it had to be shipped in, then it had to be taken to an authorized repair center 100 miles away (ran out of a guy's house...). Finally we were told we've exceeded the "lifetime" use of the tool, just a complete PITA to deal with. Now, we are REALLY hard on tools and do have a lot of switch/motor failures even still with Dewalt/Milwaukee and their tools that shutdown all the time to protect themselves, but over half the Ridgid stuff that broke was barely used and several pieces were DOA out of the box or fresh as a replacement. When they started denying warranty claims I dug thru the graveyard and was making whole tools out of several broken ones and a vast majority of the failures were loose wires at the switch, tabs on the motor, or armature wires. Its basically Ryobi assembly/design quality, with Milwaukee material quality.

 

The whole thing left a real bad taste in my mouth for Ridgid, I'm sticking with Milwaukee for my personal tools... they've had their fair share of issues, but nowhere near as bad.

Link to comment
Share on other sites

Link to post
Share on other sites

 

1 hour ago, Scheer said:

And on the subject of saws, just picked this up last month. I've really been wanting a sliding saw, but my bench for it will end up being against a wall so a normal slider wouldn't work with the slides sticking out the back. This one has two folding arms for the slide part so it barely takes up any more depth than a standard miter saw. With a riser block, it can cut up to 18" wide boards. So far the only downsides I've found are a odd size dust port, and it looks like they started to implement a shadowline guide on it, but never put the electronics in it... so must have found that is patented or something, sure would have been nice tho. There are a few Youtube videos of people making their own that I'll have to try at some point.

 

*SNIP*

 

Nice! I have a Bosch 12" sliding miter saw with a similar pivoting arm design. I've owned it for about a year now, and have used it a ton, I love it. 

 

20180428-140901-1.jpg

 

 

 

 

CPU: i9-13900k MOBO: Asus Strix Z790-E RAM: 64GB GSkill  CPU Cooler: Corsair H170i

GPU: Asus Strix RTX-4090 Case: Fractal Torrent PSU: Corsair HX-1000i Storage: 2TB Samsung 990 Pro

 

Link to comment
Share on other sites

Link to post
Share on other sites

1 hour ago, Scheer said:

...Same company also owns Milwaukee. As for the lifetime warranty, don't actually expect to use it more than a few times. Sales person had my family talked into how amazing Ridgid was, so between several people in the family/company we bought 10 or so kits. A few years in and I don't think a single tool out of ~50 was still working, they refused to warranty anything after a few claims and started giving us a huge run-around where first it had to be in store (Home Depot), then it had to be shipped in, then it had to be taken to an authorized repair center 100 miles away (ran out of a guy's house...). Finally we were told we've exceeded the "lifetime" use of the tool, just a complete PITA to deal with. Now, we are REALLY hard on tools and do have a lot of switch/motor failures even still with Dewalt/Milwaukee and their tools that shutdown all the time to protect themselves, but over half the Ridgid stuff that broke was barely used and several pieces were DOA out of the box or fresh as a replacement. When they started denying warranty claims I dug thru the graveyard and was making whole tools out of several broken ones and a vast majority of the failures were loose wires at the switch, tabs on the motor, or armature wires. Its basically Ryobi assembly/design quality, with Milwaukee material quality.

 

The whole thing left a real bad taste in my mouth for Ridgid, I'm sticking with Milwaukee for my personal tools... they've had their fair share of issues, but nowhere near as bad.

Do you know how to tell when a salespeople are lying? Their lips are moving. All seriousness aside, I've found Home Depot sales people don't always know their products or even their store.

 

Ridgid and Ryobi are not intended for heavy use, such as what a construction worker or really avid DIYer or hobbyist would subject their tools to. They are a less expensive alternative for the average or slightly more active homeowner. I've had only one Ryobi 18v power tool fail on me, a random orbital sander that released its built in magic smoke, and it was replaced under warranty.

 

I probably use my Ryobi tools more than most homeworkers normally will but they still have held up fine for me and probably will for the rest of my life ( and beyond since I'm pushing 70). I have yet to have a Ryobi Li-on battery die on me or even show signs of deteriorating, and some of them are around ten years old. My tools last because I don't abuse or heavily use them (abusing and heavily using are not the same thing). I respect any limitations they have. I never completely discharge my Li-on batteries; I use them until they just reach the last bar, then immediately swap them out for fully charged ones.

 

Heavy tool users should shell out the shekels for higher quality tools, such as Dewalt, Makita, or, if sufficiently flushed, Festool (I drool over the latter tools but just can't justify their expense for the usage I give them). Many of the old names in tools, such as Morse, Stanley, Black and Decker, or Craftsman (with the possible exception of non-consumable using Craftsman hand tools) have become poor quality and/or overpriced for the quality you do get.

 

There are some higher priced tools I will spring extra for, such as Starret measuring and layout tools. I recently shelled out around $100 for a cute little 4" combination square (and that was without a center head). I've seen too many out-of-square squares in other brands. I got funny looks from a salesperson when I bought a framing square at Home Despot a while back because I was using one square to check the squareness of another square (he never heard of that basic trick).

Jeannie

 

As long as anyone is oppressed, no one will be safe and free.

One has to be proactive, not reactive, to ensure the safety of one's data so backup your data! And RAID is NOT a backup!

 

Link to comment
Share on other sites

Link to post
Share on other sites

11 minutes ago, Real_PhillBert said:

 

Nice! I have a Bosch 12" sliding miter saw with a similar pivoting arm design. I've owned it for about a year now, and have used it a ton, I love it. 

 

20180428-140901-1.jpg

 

...

Sweet! I've been drooling over Ryobi's 36v (uses two 18v batteries)10" sliding mitersaw and a portable stand but I just haven't had a project yet that would justify the storage space needed and it's cost. Besides, Ryobi os constatly coming out with new improved versions of its tools so I prefer to wait until I actually need a tool before I buy it to make sure I get the latest and (usually) greatest.

Jeannie

 

As long as anyone is oppressed, no one will be safe and free.

One has to be proactive, not reactive, to ensure the safety of one's data so backup your data! And RAID is NOT a backup!

 

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, Lady Fitzgerald said:

Sweet! I've been drooling over Ryobi's 36v (uses two 18v batteries)10" sliding mitersaw and a portable stand but I just haven't had a project yet that would justify the storage space needed and it's cost. Besides, Ryobi os constatly coming out with new improved versions of its tools so I prefer to wait until I actually need a tool before I buy it to make sure I get the latest and (usually) greatest.

I usually wait until I really need to buy a tool as well. At least for the most part, i've been known to buy Snap-On ratchets on a whim before.

 

All of my cordless tools are Dewalt US produced XR 20V line. I have a pretty good selection now. 

 

Could you do me a solid and delete the ECO BOM changes pics from your quote? That's work stuff that's unrelated and just somehow ended up getting pasted into the post. Thanks.

CPU: i9-13900k MOBO: Asus Strix Z790-E RAM: 64GB GSkill  CPU Cooler: Corsair H170i

GPU: Asus Strix RTX-4090 Case: Fractal Torrent PSU: Corsair HX-1000i Storage: 2TB Samsung 990 Pro

 

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, Real_PhillBert said:

I usually wait until I really need to buy a tool as well. At least for the most part, i've been known to buy Snap-On ratchets on a whim before.

 

All of my cordless tools are Dewalt US produced XR 20V line. I have a pretty good selection now. 

 

Could you do me a solid and delete the ECO BOM changes pics from your quote? That's work stuff that's unrelated and just somehow ended up getting pasted into the post. Thanks.

Snap-On got big by having their lifetime warranty and their tool trucks that would hop from jobsites to jobsites. They were convenient and their tools were pretty decent.

Jeannie

 

As long as anyone is oppressed, no one will be safe and free.

One has to be proactive, not reactive, to ensure the safety of one's data so backup your data! And RAID is NOT a backup!

 

Link to comment
Share on other sites

Link to post
Share on other sites

I have plenty of tools...

 

..o wait, you're not talking about co-workers are you?

 

nevermind, carry on

NOTE: I no longer frequent this site. If you really need help, PM/DM me and my e.mail will alert me. 

Link to comment
Share on other sites

Link to post
Share on other sites

26 minutes ago, Radium_Angel said:

I have plenty of tools...

 

..o wait, you're not talking about co-workers are you?

 

nevermind, carry on

LOL! I think we all had our fair share of those.

Jeannie

 

As long as anyone is oppressed, no one will be safe and free.

One has to be proactive, not reactive, to ensure the safety of one's data so backup your data! And RAID is NOT a backup!

 

Link to comment
Share on other sites

Link to post
Share on other sites

@Lord Mirdalan I adjusted you title from Tools thread? to Tool Thread!. Much better fit.

 

 

 

As for myself I own so many Electronics tools, Automotive tools and Carpenters tools... that I could not list them all unless I used up a page or two here to make it happen. I think I have close to .... 10-12k USD in tools...I think.

COMMUNITY STANDARDS   |   TECH NEWS POSTING GUIDELINES   |   FORUM STAFF

LTT Folding Users Tips, Tricks and FAQ   |   F@H & BOINC Badge Request   |   F@H Contribution    My Rig   |   Project Steamroller

I am a Moderator, but I am fallible. Discuss or debate with me as you will but please do not argue with me as that will get us nowhere.

 

Spoiler

  

 

Character is like a Tree and Reputation like its Shadow. The Shadow is what we think of it; The Tree is the Real thing.  ~ Abraham Lincoln

Reputation is a Lifetime to create but seconds to destroy.

You have enemies? Good. That means you've stood up for something, sometime in your life.  ~ Winston Churchill

Docendo discimus - "to teach is to learn"

 

 CHRISTIAN MEMBER 

 

 
 
 
 
 
 

 

Link to comment
Share on other sites

Link to post
Share on other sites

14 minutes ago, SansVarnic said:

@Lord Mirdalan I adjusted you title from Tools thread? to Tool Thread!. Much better fit.

 

 

 

As for myself I own so many Electronics tools, Automotive tools and Carpenters tools... that I could not list them all unless I used up a page or two here to make it happen. I think I have close to .... 10-12k USD in tools...I think.

I'm in the same camp. 

 

I dont use them professionally,  but I'm a pretty diehard DIY guy, and I like tools. 

CPU: i9-13900k MOBO: Asus Strix Z790-E RAM: 64GB GSkill  CPU Cooler: Corsair H170i

GPU: Asus Strix RTX-4090 Case: Fractal Torrent PSU: Corsair HX-1000i Storage: 2TB Samsung 990 Pro

 

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, Real_PhillBert said:

I'm in the same camp. 

 

I dont use them professionally,  but I'm a pretty diehard DIY guy, and I like tools. 

Nice. DIY is a good way to do things.

I used to be a carpenter for about 12 years so that explains those tools, and the greater portion of my expense. I work on my own vehicles and of course any techie has to have tools to build and fix electronics ... lol. I am hoping to put the carpenter tools to good use again one by building my own furniture, I have several designs to replace my current steel stupid looking bed frame.

?

Edited by SansVarnic

COMMUNITY STANDARDS   |   TECH NEWS POSTING GUIDELINES   |   FORUM STAFF

LTT Folding Users Tips, Tricks and FAQ   |   F@H & BOINC Badge Request   |   F@H Contribution    My Rig   |   Project Steamroller

I am a Moderator, but I am fallible. Discuss or debate with me as you will but please do not argue with me as that will get us nowhere.

 

Spoiler

  

 

Character is like a Tree and Reputation like its Shadow. The Shadow is what we think of it; The Tree is the Real thing.  ~ Abraham Lincoln

Reputation is a Lifetime to create but seconds to destroy.

You have enemies? Good. That means you've stood up for something, sometime in your life.  ~ Winston Churchill

Docendo discimus - "to teach is to learn"

 

 CHRISTIAN MEMBER 

 

 
 
 
 
 
 

 

Link to comment
Share on other sites

Link to post
Share on other sites

Since we're talking about tools, here's my mechanics tool box, it's FULL. To the point of being a real problem.

 

20170606-180941.jpg

 

I'm really considering picking up one of these to supplement:

 

tv-bk7217mz_2_1.jpg

https://www.strictlytoolboxes.com/tool-vault-elite-72-17-drawer-tool-cabinet.html

 

CPU: i9-13900k MOBO: Asus Strix Z790-E RAM: 64GB GSkill  CPU Cooler: Corsair H170i

GPU: Asus Strix RTX-4090 Case: Fractal Torrent PSU: Corsair HX-1000i Storage: 2TB Samsung 990 Pro

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×