Search the Community
Showing results for tags 'usb 3.0'.
-
Has anyone found a good solution to the problem of terrifyingly fragile USB 3.0 motherboard connectors? I've considered getting a low profile angled one that should allow the thick and janky default header that most cases come with to safely reside in the back. Has anyone tried anything like this out? This janky fragile POS that I've busted or bent pins because of multiple times. This is something I've thought of doing just so I can safely stash the actual connector in the rear and not worry about torquing the heck out of it to get a seamless run. I've had dozens of scenarios over the years where this has been a problem, just never thought to actually fix it.
-
Is it possible to run a 1080 or a 1440p display with a USB 3.0 hub? There are several videos on YT and Amazon shows you a variety of USB 3.0 to HDMI adapters. But doesn't the display have a huge delay then? I just ordered a new Inspiron 15 7567 and it only has one HDMI port and no USB type C or thunderbolt port and I would like to connect 2 additonal displays to it. Can I just order and use an USB 3.0 to HDMI adapter? Will it run videos smooth? I do not plan to game using this port. I am asking here because a lot of the USB 3.0 to HDMI videos on youtube are produced by companies which try to sell their on product so I dont really trust them. Already thanks to you in advance.
-
Both of them sound horrible, but the HDD problem sure is more sensitive Since this forum was helpful to me I decided to post another problem I had lately A while ago I purchased an HDD 2.5 inch SATA Enclosure W/USB 3.0 and I have put an old HDD I had in it to use as external storage but something weird began happening. whenever I plug it in into the USB 3.0 port in my laptop it does certain things 1- Location is not available 2- it access it but it doesn't transfer properly + Device is Unresponsive sometimes -in the image below it started transferring but suddenly stopped and got stuck like this - in this second image it did transfer for a little while but stopped and showed an error code Note :: when I searched the code I found comments about HDD wear out , I'll talk about that later little note : yes this is my music taste lol 3- it access it and it does transfer properly - sometimes it does that at 30+ MB/s Speeds -there is a moment where it did transfer at a 200+ MB/s Speed which was almost instant so I couldn't screenshot it properly , I did try doing that again but it did reach 60+ MB/s in this image It does all three things I mentioned above while getting unplugged and re plugged randomly while connected via the port while making the device unresponsive most of the time I don't know if it is a problem within the HDD Enclosure or the port itself since It clearly does work if I plug my BT mouse dongle and other USB flash drives (I only have 2.0 USBs which is why it is hard to draw a conclusion about the 3.0 issue) Could it be because of my old HDD? and if so why does it work fine on a 2.0 USB port (Edit: when I decided to try a 2.0 port it didn't transfer properly but it didn't unplug itself randomly it was more stable than the 3.0 port but I tried another 2.0 port and it transferred my data so I decided to copy all of it to my device's SSD as a backup) if it is worn out I think it shouldn't work properly on both ports correct me if I'm wrong , I did check its health in crystaldiskinfo & tested it in crystaldiskmark and HD Tune before I bought the Enclosure in the first place , I re-checked it after I transferred my files and these are the results : I would like to know if there's a solution and if my HDD is indeed wearing out and isn't safe to store critical data then I would prefer knowing that and backing up my files elsewhere and/or buy a new one also if the 3.0 port has an issue i would like to fix that so I could transfer files at maximum speeds Thank you for reading and I hope to receive some helpful information
-
A work critical pc's parts has died and needed replacement, I swapped over almost everything except the hard drive because it has the installs of important programs and databases within it so a reinstall of windows 7 with USB 3.0 drivers baked in is out of the question. Though thru an USB to PS/2 adapted I have gained keyboard input. How can I get this computer up and running from this state? Any points to the right direction will be appreciated!
-
I downloaded the drivers for my chipset, b450 on the windows 7 hard drive and there is still no input. My keyboard isn’t getting power because the rgb turns on when there is power.
-
Hello, I seem to be experiencing slow USB file transfer speeds. I have a Dell Inspiron 7586 laptop. It has two USB Type-A 3.0 ports. From what I understand, USB 3.0 is supposed to have a maximum transfer speed of 600 MB/s; however, I seem to be getting a maximum of about 50 MB/s (averages about 25 MB/s). I'm transferring files to/from a SanDisk USB 3.1 Gen 2, 128 GB flash drive. I was wondering if this flash drive is backwards compatible with USB 3.0; if it is, I have no idea what's causing this. I've already tried selecting "better performance" in the device policy settings. This made no difference. If you need further information, please don't hesitate to ask. Any help is greatly appreciated! Thanks for your time!
-
New Egg and Amazon has tons of USB 3.0 in GB's from 10GB to nearly 1 TB but what is the best price point? In other words. Suppose I buy a USB 3.0 64GB flash drive for $40 but also buy a USB 3.0 128GB for $70? Obviously the $70 is better since per GB it is less money. But how can I quickly do the calculation for dozens or nearly 100 USB Drives? URL for online program to do this for me or? thanks for reading this.
-
So recently swapped my old case and power supply for new ones but my case comes with a USB 3.0 20 pin plug; my motherboard doesn't have a USB 3.0 20 pin socket however I've found a USB 3.0 expansion card for PCIE x1 with both USB 3.0 ports and a 20 pin socket. My question is, is PCIE x1 fast enough to take full advantage of USB 3.0 or not?
- 2 replies
-
- pcie1
- expansion card
-
(and 1 more)
Tagged with:
-
Ive got a recently bought case with 2-usb 3.0 and 1-usb 2.0 slots at the front. It was working fine for sometime until suddenly I noticed that both 3.0 slots are no longer working for any of my USBs (ive got 3 USBs) and even my phone cannot be read it always says not recognized BUT those usb 3.0 slots are only working for my Cruzer fit 32gb Sandisk USB. Ive tried google but all their issues are USB not working at all, while mine is only working for one USB
- 2 replies
-
- help
- troubleshoot
-
(and 1 more)
Tagged with:
-
Looking for a hub where it has 5+ USB 3.0 ports, would be nice with 1 or 2 USB C, but not a game-breaker. If it needs its own power brick, it needs to have a decent length, since it will be going on a standing desk. Would be great if it could be around the 100$ mark. Edit: Will be used with a desktop
-
Hello everyone! Turned on my pc today and got the bios message: "Over current have been detected on your USB device!! System will shutdown after 15 seconds to protect your mainboard." Unplugged all usb devices and the problem still happened. After unplugging the USB 3.0 cable from the MB I was surprised by a broken pin (see uploded pic). A single broken USB pin really killed my Motherboard?!?! MB B350m Bazooka Any way to fix this issue?
-
before buying the Sharkoon tg4 RGB i would like to ask something about the front panel. My case on the front panel has 2 usb 3.0 type A while my motherboard (MSI MAG Z490 TOMAHAWK) only provides 1 usb 3.0 type A header. I'm asking if the case provides a single cable for both 3.0 usb type A to be plugged in to the only usb 3.0 type A header on my motherboard or do I have to buy it separately? thank you
-
usb adapter Slim USB 3.0 Type A to Type C adapter
MisterTechnik posted a topic in General Discussion
In today's LTT Video I saw an adapter like the one in the picture. I found it so cool, that I started thinking about, is there is something like this but with USB 3, the only thing I found was a USB 3 stick that's kinda slim, but not an type a port to type c adapter. So now the question, is there something like this? -
Hi guys, so i'm confused against USB 3.0 and USB 3.1 TYPE-C. USB 3.0 goes into the USB 3.2 internal connector in the motherboard, but where does USB 3.1 TYPE-C goes? Do they go to the same place?
-
Hi there once again im asking for your help lol, I have a laptop which supports m.2 and a hdd, im running only a ssd for now (240gb) and only have 130 left and I recently found out my laptop does support usb 3.0 but only on 2 ports. My plan: Get a 2.5 inch hdd 1tb Or a 3.5 inch 3tb hdd with a dock for it + power and connect it to the laptop via a usb 3.0 port. My questions are: Will the 3.5 inch hdd be slower than the internal hdd if both will be probs 5400 rpm/ 7200rpm for the 3.5 inch (if im lucky lol). Will the 3.5 inch hdd last less than the internal one since its connected via usb 3.0 whilst still being in a safe place? Will the 3.5 inch hdd work as an external hard to other pc's and be read and used? Thankyou for reading and hopefully you guys can help me out.
-
Hi there, so I have a new laptop (Asus fx503v i5-7300hq+gtx 1050) uhm I dont know how to explain this but the laptop has no usb 3.0(I think) and has only 1 hdmi, whilst I want to have 2+ monitors and a powered usb 3.0 hub. My plan is: Get a RJ45 splitter https://www.ebay.ie/itm/1-to-2-Port-RJ45-LAN-Network-Ethernet-Connector-Splitter-Extender-Plug-Adapter-J/201616755197?hash=item2ef14b89fd:g:EFMAAOSw-KFXegLl Use one of the ports as a ethernet port lol Use the other port as a usb 3.0 to rj45 which i want to invert to ethernet to usb 3.0 female (https://www.ebay.ie/itm/USB-3-0-to-10-100-1000-Mbps-Gigabit-RJ45-Ethernet-LAN-For-P-Network-V6O5-Ad-Z6D6/114100061288?hash=item1a90e4c468:g:WeAAAOSwSwdeOqQe) Then get a usb 3.0 hub. Then get a usb to hdmi which then I can connect to the 2nd monitor. My questions are: Will this actually work lol. And will I have to get anything else (for example.powered ethernet wires)? On the website it does say it has usb 3.0 on the laptop but the ports are not blue as they are literally in any other laptop that has usb 3.0 and I dont know why but theres no site for the asus fx503v while there is one for the fx503. Thankyou for reading this and please tell me if this'll work lol.
-
Wondering if it is poosible to bend an internal usb 3.0 cable to hard and break it? I just got an extension for it in my pc and didn't have much room so i had to bend it to make the length right. Just curious if it is possible to break the cable by bending it to hard?
-
As the title states, my USB 3.0 Ports do not work, at all. This is especially frustrating as my headphones use this port. So far Ive traced it to a driver problem. I think the xhci host controller is completely missing from my computer. The reason I need help here is that have No Idea on how to redownload something like this, or even what to look for.
-
Hello everyone I am currently having problem with my USB 3.0 ports. They keep disconnecting my devices randomly for a couple of seconds then reconnecting. This is happening to the ports on the motherboard and on a USB 3.0 PCIe card. I have tried reinstalling my chipset drivers but this had no effect. I am on Windows 10. PC details are in my signature.
-
i have a use 3.0 hub. but the usb cord for it is too small. if i were to connect a usb extender cord to it will it lose its 3.0 speeds? must i get a usb 3.0 extender cord?
-
I built My computer 2 years ago and I decided to rewire to make my computer look nice. I bassicly unplugged all the wires connected to the motherboard and make them look neated by using cable management skills(not really skills just hiding them at the back of the case).I also took off the CPU and re-applied the thermalpaste and added a new CPU fan.The problem was when I turned on the computer the monitor wouldn't turn on so,I turned on the monitor myself and it gave me a "no signal" error. I was stumped for hours trying to fix the problem and along the way I noticed the motherboard USB 3.0 wasn't working. I decided to come here so people like you can help me. If you have any suggestions or fixes please feel free to leave a answer as I would greatly appreciate it. SPECS ------------------------------------------ PROCESSOR- AMD FX-6300 GRAPHICS CARD- GEFORCE GTX 750 TI SC OPERATING SYSTEM- WINDOWS 10 MOTHERBOARD- MSI 970-G46 STORAGE- SEAGATE 1TB FIRECUDA SSHD-7200RPM SATA/6s 64MB CACHE 3.5 INCH RAM- HYPER X FURY 4GB 1600MHZ DDR3 POWER SUPPLY- EVGA 600W 80+ SILVER ------------------------------------------ Again, If you even think you know how to fix the "No Signal" error please feel free to help me out. Fixes or Suggestions would really help me! I dont know if the USB 3.0 not working on the motherboard is related to my no signal error so please help me out there. ¯\_(ツ)_/¯ Other than that have a great day!
-
Hey again. I just got my new Samsung Galaxy S7 Edge. So here is my problem. Im tethering my phone WLAN to my PC via USB connection. But my PC is like.. NOPE.. i don't want any of those weird junk on my USB ports. For the first 5-10 seconds the tethering works just fine but after that, nothing will load on my Chrome Browser. Im still online in Discord, Steam and other programs like these. Well, i can't load pages on steam, just like Chrome but downloading patches from games works in steam. After 1-2 hours my PC kinda catched it and the tethering works fully normal. Sometimes nothing happen after a whole day if i don't remove my phone from the PC. My old S4 Mini handled is without any problems (It's broken). I tried to check my WLAN options on my phone to make sure it's not turning off the WLAN but after chaning these options nothing happend. -Icefly
-
considering buying a USB 3.0 Monitor to be a third in my suite. Have a laptop + HDMI TV currently so that leaves the USB 3.0 port available. Anyone able to tell me with a definitive answer that a laptop running an AMD A6-6310 APU with Radeon R4 Graphics will support the third external (usb powered, usb only) monitor via the supplied AOC displaylink software? machine is attached to my profile. Cheers.
-
So I bought a new case for a mix and match new and used parts, and It comes with 2 USB 3.0 frontal ports and just 1 Big connector. My mobo (biostar g41d3+) comes with 2 smaller USB connectors. Is there an adapter for this?