Search the Community

So I am thinking about building my first PC, but I understand the current state of GPU shortages (and some other parts aren't very available as well) and increased prices. I currently have a 6 y.o. laptop that still works fine, but starts to show issues so I want to start building soon. I have made a build that I would love to have, and an alright build that could last me a couple of years (for anyone interested, I will write it down below). The build that I would love to have is outside my budget atm. Here's my question: Which of the following options would be best? Build the alright pc, which will last me a few years but need to be replaced completely when I want a better pc Build the good pc, but replace the GPU and CPU with something I could survive with for a couple of months, and replace it as soon as prices get to normal. The second one would get me my dream pc, but I will have to deal with a bad one for a while and will need to discard a CPU and GPU in (hopefuly) a couple of months, while the first one could last me a while longer without replacement, but once I need to replace stuff I will probably want to upgrade the whole thing. I also could go for a prebuild, but that removes the fun of building it myself and I feel like with prebuilds I always have to give up something (like they put a good GPU on a crappy motherboard or something) so I'd rather not do that. Thanks for your help! The two builds: The good pc: AMD Ryzen 5 5600X MSI B550-A pro MSI GeForce RTX 3060ti Corsair 32GB 3600 Corsair 4000D Airflow Dark Rock Pro 4 If I go for this one, I will replace the cpu with a ryzen 5 3xxx and the gpu for a GTX 1650 probably (not sure yet) The alright build: AMD Ryzen 7 3700X MSI B450 Tomahawk GeForce 1660 Super Corsair 16GB 3200 Aerocool SI-5100 Budget (including currency): ~€1500 I guess? Country: The Netherlands Games, programs or workloads that it will be used for: Microsoft Power BI/SSMS, Assassin's Creed Valhalla, over 9000 Chrome tabs, YouTube Other details: I know RGB makes your PC ultrafast but I don't care about having a disco under my desk

Budget (including currency): 4000-7000 SEK/ €400-700 (ideally at lower end but I can stretch) Country: Sweden Games, programs or workloads that it will be used for: Studio one 3 Professional, Forza Horizon 5, Sea of Thieves, GTA V, CSGO, Valorant, Doom Eternal, Witcher 3. Gaming at 1440p144hz Other details: I'll be upgrading from the following rig. Parts I plan to keep are bolded. MOBO: MSI B85M-E45 RAM: Kingston DDR3 1600mHz CPU: Intel i7-4771 Cooler: BeQuiet PureRock Slim Storage: 3 x 1tb Samsung 870 EVO GPU: MSI Mech OC Radeon RX5700 PSU: Seasonic Focus Plus Gold 750W Case: Fractal Design Define Mini C Naturally, I've been looking at the i5-12600 and i7-12700. I've decided against the K-versions as I'm not really interested in overclocking. Additionally, I'd have to buy an aftermarket cooler just to get the system up and running, which would hurt the value proposition considerably. Instead, I'll be using the included RM1-cooler until I can't stand the noise or if the thermals are unacceptable. At that point, more affordable coolers will be available for the 1700-socket. So here's the question: would the ~50% price increase from the 12600 to the 12700 be worth it? I'd like to be able to use the parts for at least 4-5 years with my current resolution and at least 100ish fps. These are my current options: I've already purchased the RAM. What would you do in my position?

Hi folks, This is my first post here so firstly hi all! Thanks in advance for anyone who reads and takes the time to respond - I appreciate it. I'm interested in what performance gains I might be able to get by upgrading my system (specs below). Most of my usage is on SketchUp, Enscape, V-Ray and some other CAD programs, though I do do some gaming and image/video editing too. As I understand it, my biggest limitation at the moment might be the single-core processing speed? Also I guess ram speed could be improved if I change CPU & motherboard? I've been getting a few WHEA errors recently, and I think it might be one of the RAM sticks, so I may have to replace them in order to be sure. No suggestions are bad- I'm open minded. Budget... well lets say no more than £2k for any combination of upgrades. Current rig: CASE: NZXT H700i MB: ROG Rampage VI Omega Extreme PSU: Corsair RM850X CPU: i9-9900x (9900k was out of stock when I commissioned this system) Cooler: Corsair H150i Pro 360 RGB RAM: Corsair Dominator Platinum RGB DDR4 3200 16GB x 4 GPU: Asus RTX 2080ti ROG Strix OC HD1: Samsung 1TB 970 Evo Plus HD2: Seagate 2TB Barracuda ST200DM008 Current temps: System is OC'd to about 28% (stock OC at SCAN computers, I'm not messing...) when using the Occulus Quest 2 in link mode to view an Enscape model the GPU usage goes straight to 100%, and gets up to around 70C. CPU never gets above 60C. Thanks!

Hi all, The full size Torrent case seemingly is only available to order with RGB in black, why on earth is this? It seems like it's a choice of the colour you want, or RGB, but not both. I cannot see the logic in shipping one colour of the case in RGB fans installed, and not others? Are they likely to release it down the line in grey/white with the RGB fans, or should I just look at other options? Thanks, Kagan

I am currently looking for a laptop for high school. It will mainly be using Google Services, but I want it to be a windows device so it isn't useless after school. I also want to do a little light gaming, probably just a little Minecraft and similar intensity games at mid graphical settings. My budget is ~550$, though going a little under budget would be nice. I am currently looking at the Lenovo Ideapad Flex 5 14 (AMD 5500U & 16gb RAM). Is there another computer I should be looking at? Thanks in advance for your response.

I'm looking at getting either the 1060 WINDFORCE OC, or the G1 Gaming 1060, however I'm a little confused as to what one is best. There's only around 40Mhz clock difference between the two cards, with around £30 being the price difference. Given that I'll probably be overclocking it, would it make a difference which one I go for?

I have a fairly new system, and I was wondering if I were to upgrade it, in what order should I do it, and with what options. My system specs: Thermaltake versa c22 case Gigabyte gaming 3 z170 x mobo i7 6700 k oc d to 4.5 ghz Enermax liqmax II 240 aio water cooler 5 system fans (2 corsair ml pro 120 for radiator fans, and 3 corsair hd120 for case airflow) Thermaltake tr2 gold 700w psu (new version) Gigabyte gaming 1 Gtx 1080 HyperX fury ddr4 2*8 gb 2666 ram 240 gb ssd and 1 tb hdd Corsair node pro for case lighting For peripherals I have razer mouse, headset, speakers and keyboard. Microboard m340 clz monitor. Thanks for the help!

Connectivity Audio Display Rear Camera Front Camera Multimedia In The Box Basic Parameters Dimensions 152.7 x 74.7 x 7.35 mm Weight 158 g Material Anodized aluminum Color Gunmetal / Soft Gold Operating System OxygenOS based on Android™ Nougat CPU Qualcomm® Snapdragon™ 821 Quad Core, Kryo™: 2x 2.35 GHz, 2x 1.6 GHz GPU Adreno™ 530 RAM 6GB LPDDR4 Storage 64GB / 128GB UFS 2.0* Please note that the Soft Gold version is only available in 64GB. Sensors Fingerprint sensor, Hall sensor, Accelerometor, Gyroscope, Proximity sensor, Ambient light sensor and Electronic Compass Ports USB 2.0, Type-C Dual nano-SIM slot 3.5 mm audio jack Battery 3,400 mAh (typical value, non-removable) Dash Charge (5V, 4A) Buttons Hardware keys and on-screen navigation support SAR Values Standard: FCC Near the ear: 0.995W/kg(1g) Worn on the body: 0.645W/kg(1g) Other Alert Slider Custom icon packs Gesture Control (Display On + Display Off) OnePlus Shelf Vibration motor RGB LED notification light Connectivity Network GSM: 850, 900, 1800, 1900 MHz 4G LTE (Cat. 6) North America model WCDMA: Bands 1/2/4/5/8 FDD-LTE: Bands 1/2/4/5/7/8/12/17/30 CDMA EVDO: BC0 Europe / Asia model WCDMA: Bands 1/2/5/8 FDD-LTE: Bands 1/3/5/7/8/20 TDD-LTE: Bands 38/40 China model WCDMA: Bands 1/2/5/8 FDD-LTE : Bands 1/3/5/7/8 TDD-LTE: Bands 38/39/40/41 TD-SCDMA : Bands 34/39 CDMA EVDO: BC0 Wi-Fi Wi-Fi 802.11 a/b/g/n/ac Bluetooth Bluetooth® 4.2 NFC NFC Enabled Positioning GPS, GLONASS, BeiDou Audio Speakers Bottom-facing speaker Microphones Dual-microphone with noise cancellation Features OnePlus Music Technology Dirac HD Sound® Display Size 5.5 inch Resolution 1080p Full HD (1920 x 1080 pixels) 401 ppi Bezel 0.755 mm Cover Glass Corning® Gorilla® Glass 4 Type Optic AMOLED Aspect Ratio 16 : 9 Features Night Mode Display Light / Dark Theme Accent Colors Rear Camera Sensor Sony IMX 298 Sensor 16 MP 1.12 µm OIS Yes EIS Yes Autofocus PDAF Aperture f/2.0 Video 4K resolution video at 30fps Slow Motion 720p video at 120fps RAW Image support Yes Lens Cover Sapphire crystal lens cover Features Auto-HDR, Dynamic Denoise, Manual Control, HQ Front Camera Sensor Samsung 3P8SP Sensor 16 MP 1.0 µm EIS Yes Autofocus Fixed Focus Aperture f/2.0 Video 1080p video at 30fps Auto selfie Smile Capture Multimedia Audio Supported Formats Playback: MP3, AAC, AAC+, WMA (v9 and v10), AMR-NB, AMR-WB, WAV, FLAC, WAV, OGG Recording: WAV AAC AMR EVRC QCELP Video Supported Formats Playback: HEVC (H.265), H.264, MPEG-4, DivX, Xvid, MPEG-2, MP4, MOV, 3GP, AVI, MKV, ASF Recording: AVC Image Supported Formats Playback: JPEG, PNG, BMP, GIF Output: JPEG In The Box 1x OnePlus 3T 1x Screen Protector (pre-applied) 1x Dash Type-C Cable 1x Dash Power Adapter 1x SIM Tray Ejector 1x Quick Start Guide 1x Safety Information Was wondering about people's thoughts on is the phone worth for its specifications, performance, and over all its sleek design vs that of other androids. I personally like it, but I'd like to make sure before I make the buy, root kit it, download multiple things, and essentially make it a ethical hackers delight phone. Also going to test if you can game on it

I'm looking for an alternative solution to window system resource manager, anyone know of a better solution to manage resources on Windows server 2012 R2?

My mom's laptop is having an issue, I don't know how it happened or what could have caused it. I am not quite sure how to describe the issue, but I will try. When accessing the file explorer, usually the file tab has several options including the print option, currently, none of the normal options are showing and instead replaced with a set I've never seen before. (see picture) what I would like to know I how to fix it so that the normal options are showing.

Well while the options are good to have, the fact that you're limited to just one is not great. What if I consider a post from someone funny and also I agree with it? I can only pick one. Why not allow people to select multiple options? And what would be a great feature would be a dislike/disagree button. Yeah yeah yeah in the declined suggestion thread it says that if you disagree with something to quote that comment and explain why you disagree with that person's comment. However something you guys aren't taken in consideration is that doing that actually starts "wars" among some users. And what was a good thread before, looks like a youtube comment section. The disagree/dislike/whatever you call it button would be great new feature. You don't like something, you click that button and move on. Instead of you don't like something, quote it and have the possibility of starting a flaming war.

Hi guys I'm going to upgrade my RAM for my Ryzen 5 1600 system Which one of these kits should I get? I use my system for gaming They cost about the same except for the last one. How much of a performance difference will I see with 3000mhz instead of 3200mhz? https://tweakers.net/pricewatch/496055/g-punt-skill-ripjaws-v-f4-3200c16d-16gvgb.html https://tweakers.net/pricewatch/786133/corsair-vengeance-lpx-cmk16gx4m2z3200c16.html https://tweakers.net/pricewatch/671721/g-punt-skill-aegis-f4-3000c16d-16gisb.html

I'm buying an MSI Corsair Hydro GFX AIO shroud (picture attached) for my ASUS GTX1080ti FE and have a couple of questions, Do you think whats pictured is worth $50AUD? and my main question, What fan should I get for the radiator? I've narrowed it down to three options. Noctua NF-F12 Industrial PPC 120mm 2000RPM PWM Fan - $39AUD https://www.centrecom.com.au/noctua-nf-f12-industrial-ppc-120mm-2000rpm-pwm-fan Noctua NF-P12 Redux Edition 1700RPM PWM Fan 120mm - $35AUD https://www.pccasegear.com/products/44931 be quiet! Silent Wings 3 120mm PWM Fan 2200RPM High Speed Edition - $29AUD https://www.pccasegear.com/products/37643/be-quiet-silent-wings-3-120mm-pwm-fan-high-speed-edition Now on paper, it looks like the Silent Wings 3 is the obvious choice boasting 28.6dB @ 2200RPM which is slightly quieter and slightly faster than the NF-F12 making 29.7dB @ 2000RPM while managing to be $10 cheaper. I'm curious if real-life tests show different results though because I've come to notice with PC parts that it isn't as "cut and dried" comparing a specs list to simply deduce what's best. This and the fact that I've always heard Noctua to be the best performing fans while still managing to be quiet. Also, I feel as if I'm biased towards the be quiet because three of my case fans are be quiet and my CPU cooler is the be quiet dark rock pro 4. Which I've had no troubles with and am very impressed with so far. Bottom line, my mind was pretty much made up from the beginning on the Silent Wings 3 when I compared the numbers but I want to hear personal experiences that might sway me towards Noctua. I thought I’d add that I won't leave the fan set to a static speed, I’ll adjust the curve to correspond with the GPU temperature so it will be on lowest at idle, probably 1000 at the mid-range and hopefully around 1250-1500 on the higher loads, only letting the RPM max out if the temps start to hit thermal limits

I'm having a dilemma with a bunch of ideas for a build using parts lying around the house after upgrading my main rig. I've ran through 3 build scenarios, though my current X99 board had a 00 error and am not 100% sure whether the motherboard or CPU is fried. I'm basing this on assuming the board needs RMA'd and fixed. They are going for around $250 used on Ebay right now. However, selling these and buying some new core components seems like a good idea. The 2200G build I have is the most enticing financially, but I'm concerned it will be a giant bottleneck with a dedicated GPU pairing like a GTX 1070. I also understand that Computex 2019 is soon, and there could be some stellar new APU's and CPU's coming out for a great price, but I'm basing all this on what is available now. I'm curious to get feedback if any of these builds or paths make sense. I'm trying to do it on the cheap, but not corner myself with no upgrade path or bad bottlenecks. What I have to use 5820K 6-core CPU (assumed working) 32GB Ripjaws 4 G.Skill DDR4 2400 RAM Seasonic X-650W Gold PSU 250GB Intel 520 SSD What needs repaired ASUS X99 Pro 3.1 Motherboard (assume $130 RMA quote) :::::::::::::::::::::::::::::::::::::::::: BUILD 1 What must be purchased Video Card ($220) - Nvidia EVGA 1660 XC Heatsink ($35) - Coolermaster Hyper 212 Black RGB Case ($60) - Phanteks P300 TOTAL ESTIMATE: $95 + $130 Mobo Repair + Video Card ($220) GRAND TOTAL Out of Pocket: $445 (before tax) ———————— ———————————————————————— BUILD 2 What I can sell (ebay pricing) 5820K ($150) Fixed Motherboard (-$130 + $250 sale) $120 profit —— Total Profit: $270 Must Purchase Processor ($99) - 2200G Motherboard ($105) - MSI B450 Gaming Plus Case ($60) - Phanteks P300 TOTAL ESTIMATE: $265 subtract $270 in sales GRAND TOTAL Out of Pocket: -$5 (omg I made money... maybe) ———————————————————————————————— BUILD 3 What I can sell (ebay pricing) 5820K ($150) Fixed Motherboard (-$130 + $250 ebay sale) $120 profit —— Total Profit: $270 Must Purchase Processor ($165) - Ryzen 2600 Video Card ($220) - Nvidia EVGA 1660 XC Motherboard ($105) - MSI B450 Gaming Plus Case ($60) - Phanteks P300 TOTAL ESTIMATE: $550 subtract $270 in sales GRAND TOTAL Out of Pocket: $280 (before tax) ———————————————————————————————— or buy dank ass new RTX GPU for my main rig? 2080 or 2080 Ti ($700-$1200) 2-3 year old GTX 1070 would go to all builds (concerned for the 2200G pairing though)

Hello, I have a MSI GE63 8RF-099CA laptop which has Nvidia GTX 1070 graphics card. Also, it has Intel integrated graphics 630 in it. So in the Nvidia Control Panel, only the 3D Settings Option is available. I am pretty sure there are more than just one option! So I would like to get the other options too like the Display option, Stereoscopic 3D option, and the Video option. Also, does the Intel Integrated Graphics have to do with it? (NVIDIA OPTIMUS) What the thing with Display Driver Uninstaller? Will it help in any situation regarding this issue? Thank You.

Heya! I'm moving away from home (yay me), and it's compact living time. My triple monitor setup has to go, and I've been eyeing some 4K monitors with good color accuracy for editing since I do photography. The 27UD88 has been my first hand choice, it seems to pack alot of good stuff and works well for gaming. But.. From what I've heard the 27UD68 is the *exact* same monitor as the 88 but without the extra USB ports, such as 3.0 and Type-C. See, I'm in no need of those ports, so if it's about 200$ cheaper without them and still offer the same picture quality.. I'll get the 68. I basically want this confirmed, I've looked around a fair bit and can only find one old forum post from 2 years ago that was kind of vague. That or if you have any other good options ofc! Thanks!

Okay, so i purchased an XPS 15 9570. I love it. Its is amazing. However; what other laptops would you guys recommend within that price range (max $1600/$1700). I'm looking for something with amazing battery life that is good to look at, aesthetically pleasing and can game well enough on occasion. If i cant find any alternatives or anything i'll probably stick with the XPS but i plan to experiment and find something amazing. Anything out there that offers everything the XPS has to offer and more? Also im very big on IO - i'd love something with all the IO id ever need generally speaking but thats kinda an added bonus thing for me. Give me your best shot guys! Maybe Linus can give his personal recommendation? haha id instantly buy whatever he recommends honestly. But lets see what we got EDIT : Id also love a 2 in 1 that is amazing... that said tho, opinions on the XPS 15 2 in 1?

So... I think I have my build mostly figured out (alot of research), as the title says trying to build kind of a jack of all trades on a budget. Gaming and CAD are the most important, but I guess if your machine can do either well it is probably ok for some light streaming. Gaming 50% CAD 45% Gaming/Streaming 5%. Budget is hard cap of $1200, but preferably under $1000. CAD is usually pretty light but I do sometimes get into very large assemblies and simulations. CPU: AMD - Ryzen 5 2600 3.4GHz 6-Core Processor ($165.99 @ Amazon) Motherboard: MSI - B450M PRO-VDH Micro ATX AM4 Motherboard ($79.62 @ Newegg) Memory: Corsair - Vengeance LPX 16GB (2 x 8GB) DDR4-3000 Memory ($169.99 @ Amazon) Storage: Samsung - 970 Evo 250GB M.2-2280 Solid State Drive ($99.99 @ Amazon) Storage: Seagate - BarraCuda 1TB 3.5" 7200RPM Internal Hard Drive ($39.99 @ Amazon) Video Card: MSI - GeForce GTX 1060 6GB 6GB GAMING Video Card ($284.98 @ Newegg) Case: Corsair - 270R ATX Mid Tower Case ($59.99 @ Newegg) Power Supply: Corsair - RMx (2018) 650W 80+ Gold Certified Fully-Modular ATX Power Supply ($79.99 @ Newegg) Total: $980.54 Open to input. At the moment I have peripherals (monitors, keyboard, mouse, etc.) they would be upgraded later to take advantage of the hardware. So some questions: Would a 2700X give me meaningful gains over the 2600, for litteraly 2x the cost? Would 8 gig of RAM with a 1070/1070ti better for gaming at 1080 ultra wide high/ultra settings than 16 gig with a 1060 6gb? (about the same cost) Would the 8 + 1070 or 16 + 1060 be better for CAD? Would 8 gigs ram be to detremental to CAD to even consider? Any other input is welcome.

So I'm by no means educated on routers. So this is a few questions, and some recommendations if possible. 1: Id like to improve WiFi range through my house, and i assume that a new router will improve that. Will it? (Coming form a 5+ y/o fios base router) 2: As well as improving WiFi range, are all routers the same in that, i need no more than ~3 Ethernet ports, and decent WiFi. Does a router with more ports (ethernet) differ from one than less? What do more antenna do? 3: Someone explain 2.4 ghz vs 5 ghz in a real world metric. I think i know that 5ghz is less crowded, higher penetration, but lower range. But if I put it downstairs and a room over, will it be better than what i have? (plywood and drywall walls) 4: recommendations under 150$

I was going to buy a full ATX motherboard for my new build: ASUS B150-PLUS D3 LGA 1151 Intel B150 SATA 6Gb/s USB 3.0 ATX But then my friend suggested that I get a micro ATX because it can support all my expansion cards (graphics and wireless network) but if half the price. I know that motherboards don't effect the computer's performance, but are there any other drawbacks to having a Micro ATX? Can most micro ATX boards support intel i7 processors, and if so, are they more expensive in that case? Also, are there generally enough fan control thingys on the board to control two case fans and a CPU fan? Thanks for any help i really appreciate it. -insta kill

Rainbow Six Siege does not use the dongle/DAC that comes with the HyperX Cloud 2. Therefor the microphone volume for Rainbow Six Siege is very low. I tested this when I went in CS GO had a friend listen to me. I could adjust my Mic volume with the dongle and he could hear me perfectly. However, when I jumped into a game of Rainbow Six Siege, he could not hear me at all. I tried adjusting my Mic volume with the dongle and it did not make a difference. I have all of the in game settings turned to 100 and still the same results for Rainbow Six Siege. The worst part is that HyperX is selling this headset with the game.

I have around $510 to spend on my PC/Setup. But I'm stuck between two options, first of which being a DX-Racer, K70, and one more Acer monitor (For a total of 3). The second option is an i5 Skylake CPU, Gigabyte 1151 Mobo and 16GBs of Corsair Platinum DDR4 memory. My current setup has a rocking chair for a seat, 2 monitors, and a Razer Black Widow Ultimate 2014 keyboard. My current rig has an 8350 at stock clock, 8gb of avexir ram and 8gb of vengence lp ram, with a Gigabyte am3+ mobo. http://strawpoll.me/6570190

Hi my name is max I want to upgrade my PC I built is about six months ago and I feel it could use an upgrade I also just want to so I would like upgrade things such as cpu and mother bord different memory and cooler but not sure what like the next step up is from what I currently have so here is my spec and let me know what I can look into so I can maybe purchase these new upgrades and use the old ones for another pc I use this PC for gaming about 75% Stream and record 25% Specs: Motherboard: MSI z97 gaming 5 LGA 1150 CPU: Intel i7 4790k CPU cooler: coolermaster hyper 212 Memory: corsair vengeance DDR3 8gb GPU: gtx 970 ftw by evga PSU: Evga 650w full mod gold+ Samsung ssd 250gb Segate 1 tb

About an hour or so ago, I bought Middle-earth: Shadow of Mordor GOTY from Bundle Stars, as the game was on sale for 75% off. Awesome I thought. Been wanting to get my own copy of this game on PC for a while. Once the Steam setup finished and and everything loaded, I went directly into the Options menu as any PC gamer would. After checking every possible menu, I did not find any option for toggle stealthing and/or crouching! How the hell did the developers miss this? Almost every PC game I've played has a crouch toggle. Toggle aiming is much less common unfortunately. The lack of this option makes this game borderline impossible for me to play. I have limited fine motor mobility as it is. I almost feel like I would have been better off purchasing this came directly through Steam even at the higher price point. Since I bought it through a third-party website, I cannot get my $15 back. I wish Valve had a way to let people deactivate their keys. At least that way I could give the key away to someone who can actually play it.

I want to do both gaming and editing with this build and I'd love some peripheral recommendations. I would also appreciate some fan and thermal compound recommendations. I want this build to be as quiet as it can without compromising too much performance. PCPartPicker part list / Price breakdown by merchant CPU: Intel Core i7-4790K 4.0GHz Quad-Core Processor ($316.99 @ SuperBiiz) CPU Cooler: NZXT Kraken X61 106.1 CFM Liquid CPU Cooler ($129.99 @ SuperBiiz) Motherboard: Asus Z97-AR ATX LGA1150 Motherboard ($129.99 @ Amazon) Memory: A-Data XPG V1.0 16GB (2 x 8GB) DDR3-1600 Memory ($108.99 @ NCIX US) Storage: A-Data Premier Pro SP600 256GB 2.5" Solid State Drive ($83.99 @ NCIX US) Storage: Western Digital BLACK SERIES 2TB 3.5" 7200RPM Internal Hard Drive ($123.99 @ SuperBiiz) Video Card: Gigabyte GeForce GTX 970 4GB WINDFORCE Video Card ($349.99 @ Directron) Case: Fractal Design Define S ATX Mid Tower Case ($79.99 @ NCIX US) Power Supply: SeaSonic 650W 80+ Gold Certified Fully-Modular ATX Power Supply ($113.98 @ Newegg) Total: $1437.90 Prices include shipping, taxes, and discounts when available Generated by PCPartPicker 2015-05-15 13:32 EDT-0400