Search the Community

Hello, I just upgraded from a Ryzen 5 2600X to a Ryzen 5 5600X. After installing the 5600X, I am not able to run my PC with 2 RAM sticks in anymore. I have swapped back to my 2600X to see if my RAM slot is the issue, but it POSTs and works just fine with 2 RAM sticks when my 2600X is installed. I have tried with a 2x8GB kit and a 2x16GB kit that work fine with my 2600X in A2+B2 as well as A1+B1, but no configuration with 2 RAM sticks will POST when the 5600X is installed. When I put a single RAM stick into A2 from either kit, my PC POSTs just fine with the 5600X installed. I have tried the suggested BIOS for the 5600X (7B79vAL) as well as the latest Beta BIOS (7B79vAM1) and the problem persists. Any ideas? I'd really hate to have to buy a new motherboard as I purchased the 5600X SPECIFICALLY so I wouldn't have to dish out the money on a new motherboard.

I was doing some bios settings when i see RaidXpert 2. and then out of curiosity (i always search on google before turning settings on but i was having some internet issues so i just....) i enabled The setting and restart but the pc shows reboot and select proper boot device after that i clr Cmos. And now NO POST and no signal on monitor ( i accidentally touched cmos battery with my screw driver for at least 5 secs I don't think it has to do something with this but i thought lets make things clear ) Specs Ryzen 5 3600 Asus Cerberus 1050ti OC Gigabyte B450M S2H Desktop ready 16gb ram Corsair 550 watts bonze psu Twinmos sata ssd 256gb 1 Tb hdd The pc is brand new built 15 days ago !

Hi all. I am having one hell of a problem that I have decided to open up to the community. Specs: I built this computer almost two years ago now with; I7 7700K running base clock EVGA GTX 1070 Black Edition @ 110% power limit Corsair Vengeance 16GB DDR4 3000Mhz ram Msi Z270 Gaming pro motherboard 256gb intel 600p nvme m.2 drive 500gb samsung 850 evo Sata SSD SF600 Corsair PSU 80+ Platinum Problem: What I have attempted. Removed and re-installed the latest driver from Nvidia (using Geforce experience and without). Uninstalled the Graphics card and re-installed it. Re-seated the graphics card and double checked power connectors. Is there anything you friendly chaps can think to try? Thanks, T8,

Hello, For nearly a year I've been receiving error code "00" on my Asus motherboard. No POST happens a lot of times but after turning it off and on for a couple of times(Sometimes just leaving it off for a few hours and then turning it on again) it will again continue to work normally. During the time when "No POST" happens, I've tried removing RAM sticks and i still received the same code. I've also taken my computer twice to the repair shop. These people did the same thing which I did. They checked with different RAM (Same Code-00), then they changed the PSU (Which I couldn't because I don't have extra parts to test but still same Code-00). And then they say its a motherboard problem and they need to mess with ICs else my computer wont turn on. Another person said my motherboard is dead and i should buy a new mobo instead. I usually just take the PC back because i know that if i leave it off for a few hours, it ends up working fine(Most of the times it turns on with a couple of attempts). May I know what should I do to fix the 00 error so my computer works fine always? Things I have tried: Resetting the BIOS. Works for a day and then it goes back to Code-00 and after 4-5 attempts of powering On and Off it works fine. Leaving the system on for 10 or so minutes and then retrying (It works most of the time this way). Saw this on a youtube comment once since a lot of people seem to be getting this 00 error. The explanation which the user gave was that the processor needs a bit of warmth. (But again sometimes it doesn't work). Keep in mind, when my computer works it works perfectly. I even tried doing the stress test on CPU-Z and it worked fine. Could it be some major problem still? Specs: MOBO: Asus Maximus vii hero motherboard CPU: Intel core i7 Processor (4790K) LGA-1150 PSU: Corsair VS650 ATX Power Supply (650 watt) RAM: HyperX Memory. 8GB DDR3 (1866 CL10 240 Pin UDIMM) Memory Module FAN: Cooler master Hyper TX3 Eco (Intel LGA 1151) SSD: Samsung SSD 850 Pro Cabinet: Cooler master 912 HAF (Micro ATX/ATX)

I just assembled my new Gaming rig which has: Intel Core i7 6700K CPU ASUS Z170-A Motherboard Corsair RM750 HDD with Windows 10 After CORRECT installation and testing, the PC ran perfect for a month. During me running a program the computer froze then I shut it off then I hit the power button and no ASUS logo shows up or any boot up splash screen. This appears to be a no-post situation. In the board, I see a red CPU error light from the bottom of the CPU area and after manual shutdown some lights stay on. I removed the psu cable after flipping the switch to "OFF". I sent ASUS the motherboard for repairs and they said that the board was fine and even tested so I suspect it could only be the CPU. I have two videos of what happens. The second is a second part of the first video. 20160405_214534.mp4 20160405_215418.mp4