Search the Community
Showing results for tags 'h510'.
Found 21 results
-
My friend wants the Nzxt h510 but we found a Corsair case that fits our budget but friend really wants The H510 (with a RTX 3070), I tried to convince him but he said then why are people putting RTX 3080s and Ryzen 9s in it. I’m just a amateur of PC Building but you guys are not, so prove him wrong.
-
3600 heats upto 94C while in NZXT h510 case.
GAMIX7 posted a topic in CPUs, Motherboards, and Memory
Hello everyone, Last month I bought a mid range Gaming pc. System: Ryzen 5 3600, Gigabyte A520 S2H motherboard, adata xpg d60G 3200mhz ram, gigabyte 1650 super, Cooler master 450w v2, nzxt H510. My idle temperatures are 40-50C. Sometimes peaks to 65C. While gaming or rendering videos it jumps to 90-94C. While running stress test I got 100.4C, I immediately stopped the test. What should I do? I'm in a small budget to buy something or add something to thr build. During summer the situation will be worse. I don't wanna end up burning my cpu. Should I add the pre included fans for intake and add new 2 fans for exhaust? Or should I add a cpu cooler? Or should I add a 120mm aio, whole intake will be from rear. What to do? Please somebody help me. Or should I try changing thermal paste. Look changing the case is impossible now. I want a solution. I've only 2K INR to spend. If some costs more then I've to wait more. Thanks in advance, Binay Shaw. (Your reply and solution will be helpful). -
Hi all, I have just built my first PC using the following parts. MSI H510M-A PRO i5 11400F Kingston Fury Renergade DDR 4 3200mhz 2x16GB CoolerMaster V550 V2 Gold Radeon RX6600XT When I have put it together, I am not getting any beeps or anything showing on the monitor. The EZLED is blinking between Yellow on DRAM and Red on CPU. The case fans, GPU, CPU fan etc all power on. Does anyone have any ideas what it could be? I have tried reseating everything. Tried only 1 stick of RAM, swapped them around etc. Nothing is working. Someone told me that the H510 BIOS might need flashing as there have been some updates to increase memory compatibility. Would having incompatible RAM be the issue?
-
I'm have recently upgraded my air cooling setup on my Ryzen 7 3800x from the stock wraith prism cooler to the noctua NH-D15. This has got me thinking a lot about airflow and how to best utilize this cooler in my current build. I would prefer to keep my H510 case for now, however I did see the video done by LTT on how poor the airflow is so I will be upgrading in the future. I'm looking for recommendations on how to setup these fans to get the best flows without creating to much turbulence to where it's going to hinder my cooling ability. I'm aware that all my case fans are currently setup for intake, that was an oversight on my part and was intending to exhaust the rear and top fan. I also have an extra 120mm fan that's not shown in this picture that I could use as well. Side note: does anyone have any experience with placing fans on the pcie brackets with a custom or store bought solution? If so, did you find it was worth it to get extra air flow for the GPU? Any help/knowledge is appreciated!
-
Heya, I just rebuild my machine into a new case. A H510 Flow. I'm using a 280 mm AIO for my CPU. The rest is pure air. I'm using the included 120 mm fan in the read (https://nzxt.com/product/aer-f-120mm) And I took a 140 mm fan from my old NZXT Phantom 830 and put it in the top. (I've included a beatiful sketch) I'm using pretty standard fan curves, but anything close to gaming (even youtube) ramps them up like crazy, and theyre loud af. I've tried a more relaxed fan curve, but my temps suffer. I guess that the temps inside the case is way worse, because it's lacking the massive fans from the Phantom, but It still seems too bad. Any tips? Turn around the AIO and the top fan maybe? Or replace everything with noctuas? Thanks to anyone willing to give this a look Specs: Windows 10 Pro 64-bit CPU Intel Core i5 8600K @ 3.60GHz Coffee Lake 14nm Technology RAM 16,0GB Dual-Channel DDR4 @ 1596MHz (16-18-18-38) Motherboard Gigabyte Technology Co. Ltd. Z370P D3-CF (U3E1) Graphics XB271HU A (2560x1440@144Hz) HP E27q G4 (2560x1440@59Hz) HP E27q G4 (2560x1440@59Hz) 3071MB NVIDIA GeForce GTX 1080 Ti (ASUStek Computer Inc) Storage 232GB Samsung SSD 840 Series (SATA (SSD)) 931GB Samsung SSD 980 PRO 1TB (Unknown (SSD))
-
Hello. As the title states, I am having trouble getting my new PC to boot. I built it in the case first time, and nothing happened. I then built it outside the case on a wooden table, and it worked and brought me to BIOS, and all parts worked. I then built it back into the case, and it once again would not boot. My MB is the Asus Z390-A Prime, and my case is the NZXT h510. I feel like this may be a standoff problem of my motherboard touching the case and causing it to short/not boot for safety measures, but I don't know why that is the problem. The very middle standoff is just a pin instead of a screwhole, and my case came with a bag of standoff (see images below), but I don't know what they are used for. As you will find below, I have images of the MB backplate and standoffs that came with the case. In the first image, the very middle standoff/screwhole has a pin through it, and I don't know what this is for or if its a problem. Thank you in advance, I would greatly appreciate any help that can be given. https://imgur.com/gallery/eoSYU6m
-
Hi all, I just built a computer for the first time and I surprisingly got it to post / boot / run everything successfully so far. Except for two minor things that keep bothering me and I'm not sure if they're normal or not. One is a small buzzing/humming noise that comes and goes - I thought it could be the case fans rattling so sometimes even just putting small pressure on the screw above the case/fan stops it for some time. The other is more serious I think? I think my CPU may be overheating. My room temp is around 75 Fahrenheit, pretty well ventilated. Not getting any issues or very high temps - but the temps are still concerning me. 40-50's idle CPU temp, but only 73 max when I ran 3D Mark TimeSpy? I was seeing some issues about motherboards having too high of voltage, could this be the case here? Could I have put on my AIO wrong? I did mess up putting it on the first time, and had to change orientation - after it was already on once. I've also seen the VID #0-11 fluctuate a pretty rapidly; same with my CPU temps - it jumps from 49-56 fairly frequently. I know my GPU temps seem a bit high, but seeing the case I built in is known for bad airflow/and these cards run hot. But while gaming in 1440p/higher settings I've only seen it go up to 65 Celsius. Which is why only the CPU temps seem to concern me. My parts list is here: https://pcpartpicker.com/list/wLbbZf and please let me know if there's any other info I can provide that would help. (Also, the HW monitor screenshot was taken when I was just browsing on chrome, this CAM screenshot is while I'm waiting in lobby in Escape from Takrov/nothing too taxing - neither were running concurrently)
-
Hello Guys, Before i start i want to say my english in Not very good so im Very Sorry but let's get started. So Recently i Swaped my Case from Some 30 Euro Case to a H510i case and After i Have Put all my Hardware into the New Case i Took away this Big Plastic Sticker from my Glass Panel and after a Day i Noticed some Dirty Places on My G-Panel so i decided to get The Cleaner that i always Use to Clean my Windows in My House in Germany it's Called "Sidolin" and Got a Paper Towel. Then i Started to Rub my Glass Panel and it Happend, The Dirty Spots are normal but They Aren't Going Away the Spots just Still how they Are :( i really Could Use Your Help Guys cuz i am worried now (of course If u Understood any Word from my Bad Spelling) I Hope i get some Help :D Best Wishes Greg
-
So I recently built my first gaming rig and decided to go with a Ryzen 3700x. I paried it with two GTX 1080 cards and stuffed it all in the NZXT H510. The cards are reference cards, so the blower design actually works well with the compact style ATX case. But, to save a little money out the gate I installed the included Wraith Prism cooler since I won't be overclocking just yet. However, I now find myself wanting to upgrade the CPU cooler to something better. The only problem is I can't decide whether I should go front mounted AIO, or if I should install a beefier air cooler. As a result I am stricken with three questions: 1) Should I switch to an AIO, or stick with air cooling in the H510? 2) If I go with an AIO, will I be able to retain the brand new Corsair LL120 fans that installed in the case (i.e., can I mount them to any AIO rad and make them work)? 3) If I stick with air cooling, what cooler offers the best price to performance that will fit in the H510? PLEASE HELP!!
-
I have a NZXT H510 that comes with a front panel USB C connector, but I can't find anywhere on the motherboard to plug it in. I have a MSI Tomahawk Max. Can someone help me out with this? Thanks!
-
h510 Case (and Case fan) question for the H510
WhatsTheWifiPassword posted a topic in Power Supplies
So my friend is building a pc/ and i'm helping him get some ideas. he wants H510 case, and the question is: Front case's air comes from a 90 degree angle. What kind of 140mm fan should i use? high airflow, or high static pressure fan? (plan is to use the included fans from the H510 for the top and back [top= intake] [back= outtake] [2x front = intake] ) any ideas would be appreciated! -
So I have an old case that I want to upgrade and I want to buy a NZXT H510 but am not sure how the airflow will be. I also want to mount a kraken x52 water cooler on my R5 3400G.
-
I am planning to do a 1500 dolor build. I had chosen the components R5 3600x RTX 2060 super Rog b450 f 16gb ram I am confused about the case. I am stuck between NZXT H510 elite and Cooler master H500P. I know that H500P has more airflow but H510 is more pretty Please tell me which one will you choose if you were me.
-
will a 120mm AIO clear everything in the H510, or would i be better off with the H710 that has more headroom
-
I’m currently in the process of building a PC and only need the GPU. I have a Ryzen 5 3600 inside an NZXT H510. I also have a noctua fan that I will be placing in the front of the case. Will I have any temperature problems with the RTX 2060? Or will I be good with the 3 fans I have
-
I have heard that the airflow is not that good for the NZXT h510 case. I am going to buy some be quiet! SilentWings 3 PWM 50.5 CFM 120 mm Fans. Two for the front and one for the front. Should I buy one more for the top? Should I even put a fan on the top? I don't want to hear a lot of noise if it cools the pc by one or two degrees. I know that the fans are quiet.
-
Hello, This is my first computer build and I am having some difficulty. I have a ryzen 7 3700x with a EVGA hybrid 2080 super ftw3 2 sticks of 16gb DDR4 3000mhz ram and a rog strix b 550 f gaming motherboard and a EVGA 600w bq PSU I have put everything in and I tried to use a static wrist band when dealing with my GPU and other big parts but ik I did handle it a little without the band on. My motherboard is running and all fans are running even the ones on the gpu. My motherboard however has a yellow boot light and a white vga light! My monitor outputs a no signal and I tried another monitor and it says the same. I know it's not the cable because I know it works with the HDMI from Xbox to monitor so I think it is with my pc. Any help would be greatly appreciated thanks. I haven't been able to get to the bios in any way to update drivers or install windows
-
Is the front header of the Tomahawk compatible with the connector on the H510? The one on the Tomahawk is Gen 1 while the H510 has a Gen 2 connector... I can't find anything online about the connector (don't know what to call it xd). If their connectors fit... I'm assuming it should work but with Gen 1 speed? Answers I'm looking for: Will the H510 connector fit on the Tomahawk? If it does... at what speed? Are there any major feature I'll lose from Gen 1 to Gen 2 aside from the speed? (idk... not a usb guy... thinking being able to power a monitor with Gen 2 and not Gen 1? xd) P.S. This is my first forum post... sooo sorry if I posted it in the wrong section... also I did it on my phone sooo idk if the layout would be fine (gonna try to make it organized as best as I can) -
Hey! First post here Im looking at upgrading my 6yr old pc and I haven't paid too much attention to case designs up until recently. Fell in love with the H510 Elite design but reading about how the GPU or CPU suffer. My plan is to get the X63 cooler and front mount. Does anyone who already owns this case have any regrets? The alternative im looking at is the Meshify C, my goal is to get a white/black theme going Any advice would be awesome! Thanks!
-
I am getting pretty tired of the fan noise coming from my pc. I would like to replace the two 120mm case fans and the two 120mm fans on my Corsair h100i v2. Any tips on some farley quiet fans?
-
I would want the h510 élite to be honest, even knowing it has worse thermals... but in my country there is just the h500 red and blue available... im wondering if its worth the wait (if they ever come)
