Search the Community
Showing results for tags 'h100i'.
-
I just got my new Corshair H100i RGB Elite Cooler. my case is CM storm Enforcer. but i cant get it to fit in the top of my case because the screw holes dont match up i have tried many times. Can anyone pls help me or anything
-
So I am planning on upgrading my system and was wondering if my Corsair Hydroseries H100i RGB Pro is compatible with AM5 and if so would the AIO be enough to cool the ryzen 7800x3d? The specs says it's only up to AM4 but on the corsair website AM4 coolers should fit the new AM5 sockets. Also in case it isn't compatible would the deepcool ak620 air cooler be enough? I won't be doing any manual overclocking. Here is a picture of the box
-
Looking to buy a new 240mm AIO for my new 13600K and considering that I'm coming from a Corsair H80i that is still performing well on my old 4790K after 8 years of operation, I'm planning on another Corsair buy. Their line up of 240mm coolers has got me confused though. What exactly is supposed to be the difference between the H100i RGB Elite, H100i Elite Capellix, and the H100 RGB? Why are some of them more expensive than others? Are there any functional differences i.e. quality of the pump & fittings...or is it just the RGB & iCUE stuff?
-
Hey all, Bought a new Corsair H100i RGB Platinum AIO cooler on Amazon the other day and installed it today. Was having a few problems with high very fan speed but managed to rectify it. Read the log of events below if you're interested or encountering similar problems. Plugged it in as per instruction manual. Both fans' power and RGB into the splitters coming out of the Pump, and the USB going to a USB header on the motherboard. Turned on the PC, all was fine until desktop, when both fans ramped right up to 100% and wouldn't go down. In Ryzen Master, CPU was chilly at about 22 degrees. Opened Corsair's iCUE software (I also have a Strafe Keyboard and Void Headset) and on all of the fan control settings, even quiet, it was super noisy, and the RGB was just not sticking to the setting I wanted either. WILD GOOSE CHASE TIME (DO NOT FOLLOW THESE STEPS) Found out by unplugging individual fans from the splitter that the one marked '1' was by far the highest RPM, so got a splitter out and tried to run both off of the non marked plug. Things were okay but not quiet at all, maybe at 1600RPM instead of the 2000+RPM i had from Plug '1'. Messed around for ages with fan curves trying to get it as silent as possible, but it still sounded like a vacuum cleaner even at the quietest I got it. Plugged in the both fans into 1 and unmarked again as per instructions and messed around with the ASUS QFan control in the UEFI. Didn't solve anything. At this point I was so upset with it and thought about sending it back and putting my old CoolerMaster pump-noise-a-tronic 3000 back on. At my wits end, disabled iCUE from Startup Programs. Restarted my PC and it was running really quiet, started iCUE and boom it comes in 100% again. Problem is with iCUE then. Went back into iCUE and was looking through the settings for ages trying to set pump to Extreme, but fans to minimum RPM to try and offset the noise. Tried reinstalling iCUE, and still nothing. And so, the final thing I could think of trying.... THE FIX (DO FOLLOW THIS STEP!): Checked the Firmware in Settings in iCUE. iCUE told me that the firmware was up to date. Then spotted that I could force a firmware update, what is there to lose right? Everything was fixed, just like that. Fans are now running on 500RPM or lower 90% of the time and cooling performance is great. So basically, even if it tells you the firmware is up to date, never trust it and update it yourself. TLDR: Update your firmware in iCUE if you have problems with fans running 100% Thanks for reading Rhys -
From the album: Rig Pictures
-
So, I recently upgraded most of my pc besides GPU. Long story short, I went from an i7-3770k to a i7-10700k. I changed my case to a fractal design (forgot exact model name). I originally purchased a ML240L Cooler Master which proved to be awful. Right out of the box just with the intel turbo boost benchmarks and stress testing often got me hitting TjMax 100c often and thermal throttling. Keep in mind my old 3770k with a h100i 240mm aio had me never going above 60c which I know has less cores and lower TDP. I immediately got a h100i ( set at top and as exhaust) and returned the Cooler Master aio. Now with an undervolt of 1.275 vcore and PL1 125W and PL2 175W a prime 95 with avx disabled I get around 67-73c but I do notice after a few minutes of running my core clocks drop to around 4ghz (I'm assuming power throttling since hwinfo showed it and my PL1/2 are low for a stress test like prime95). Gaming I get 45-68c depending on the intensity of game and streaming and gaming on the same pc I get 60-73c. Just wondering if this is just because the chip runs hot or what? I even repasted with thermal grizzly kryonaut(albeit spreading the paste with that plastic spreader is difficult I may have done a bad job but regardless it was like this with the preapplied paste as well before I removed it). Any info would be helpful. Thank you!
-
Hi all- I currently have an AMD Ryzen 3700X with an ARCTIC Freezer 34 eSports CPU cooler. Its been a decent CPU cooler over the past few years since I made the system but just recently the fan decided to spin itself to death and now I had two choices, either buy a new fan or just get a new CPU cooler. I've always wanted to try liquid cooling in a system and the Corsair iCUE H100i ELITE CAPELLIX cooler caught my attention. I already have a corsair case and memory so I would like the CPU cooler to also match. If someone has a better cooler in mind let me know but I want it to match with the Corsair ecosystem that I've invested in. The case I have now is a Corsair 220T AirFlow and so it says it supports 360mm coolers but it looks like it is going to be an extremely tight fit so I think I would rather stick to 240mm. I am not overclocking the system at all so I don't need a lot of overhead. Thanks for everyone who responds advice.
-
Hi all, I've installed a new corsair h100i elite capellix in my pc and I'm having issues with it being detected. I've been having issues for about a month now and have troubleshooted it down to either windows or the commander core itself. I have reached out to corsair support but no response yet. In device manager the core appears as a device discriptor request failed with the error code 43. I have tried every possible solution out there from messing with iCUE, trying it in a different PC and anything else you could possibly think of. I have got it to work a few times but it reverts to the above error after I switch the PC off at night and turn it on in the morning. For the times I have got it to work was either unplugging and plugging in the USB header of the core repeatidly until it gets detected. The other time was after messing around installing drivers and installing the specific driver "USB composite device" but it only works occasinally and reverts to the device descriptor request failed if it doesn't work. When it is working the commander core shows up with 5 devices from device manager, those being, 2x HID- complient vector defined device, 1 usb composite device and 2x USB input device. The AIO is working and all fans and lights work but its just not detected. It also retains the hardware lighting which I set in iCUE when it was detected and working properly. I've seen a few other places where people are having the same issues but the forum ends without a solution so hopefully we will find one. Thanks Iain -
Trying to find the best case as currently I can’t top mount my h100i pro xt on the top because my corsair ram is just too high profile so it blocks it from being put in, even putting the rad in first the ram then can’t fit so I’m at a loss with my current corsair case. I was told Lian-Li was good but I can’t justify spending a bunch on the case. Just trying to find the best option without burning a hole in my pocket.
-
Hi guys, My board is ROG Strix Z370-E Gaming and just 2-3 days ago I had a CPU Fan error which prevents me from booting up. What I did was, I went to BIOS and just "IGNORED" my CPU Fan instead of it being "MONITORED". Given I don't have anything running through that port as I'm using an AIO cooler connected via CPU Fan Opt, I thought this was the only safe way of booting up. Anyway, I have 2 questions: Why did all of a sudden, I had a CPU Fan error? I never had it since and I'm running this rig for about 3-4 years now. - if more info is needed on what are the things that are connected to my PC are, just let me know and I can provide. Whenever I reboot/restart my rig I have to go back to BIOS and redo what I just did of IGNORING the CPU Fan. - Do I have to do this every single time I turn my PC on moving forward? I know my rig is kind of old and someone told me that my AIO pump which is Corsair Hydro Series H100i could be bad but I just checked on the iCue and below is what is displayed: Fan running at 1500rpm on idle and pump is at 1900rpm on idle with a temp of 36.50c Do bad pumps detect as CPU Fan error? TIA edit: might have posted in the wrong section, if I did, can some mod move this to the appropriate section? Thank you so much.
-
Hey! i have ordered a 4000D chassi, with a z490 strix gaming mobo, dominator RAM and a h100i white platinum 240mm rad that i will top mount. And i got a bit worried by the ram clearance with that rad, the dominator sticks is 54mm high. is there anyone that have the same chassi with h100i or simillar 240mm aio top mounted that can measure how high the RAM can be? cheers
-
Detailed series of pics to follow along the issue: https://imgur.com/a/UfMGX6a The H100i Capellix pump does not seem to turn on after my PC wakes up from sleeping after about 30 minutes or more and sometimes, it just won't turn on at all even after completely shutting off the PC and powering it back on. The PC would say "CPU fan error" on start up. The case fans are still lightly spinning but there were no RGB lights on either the fan or pump head and the pump wasn't working. Everything is connected properly including the pump tach cable plugged into the CPU_FAN header. I tried different SATA power cables to make sure they weren't broken and the cables were not defective. The SATA cables powered all of my storage devices and the Lightning Node CORE properly. Going into BIOS shows the pump fan not spinning and CPU temperatures constantly rising well pass 70 C and continuing to climb until I shut the PC off manually to prevent overheat damage. At first I thought it was iCUE being wonky since it failed to detect the H100i Cappelix after the PC wakes up from sleep (when everything is working normally, iCUE would detect it as usual). I restarted the software and even uninstalled/reinstalled it but that didn't solve it. I then completely uninstalled iCUE to see if it really was the software at fault. I first did a controlled test where I did a normal PC power on with iCUE uninstalled and the pump worked as usual. Then I put my PC to sleep and woke it up after 1 hour. The H100i Capellix did not turn on, showing that iCUE had nothing to do with the pump not working. Also I'm noticing that the pump makes this thump sound every 4 seconds but I'm not sure if that's normal or an actual defect (I confirmed it's the pump making that thump sound because when I touched the pump, I directly felt the vibration every thump). Here's a short video of it I filmed. It's sort of hard to hear so the volume might need to be turned up high but the thump sound happened thrice in the video. Also Corsair support reached out to me and sent me a special firmware file to force update the Capellix in iCUE but that still did not solve the problem (considering iCUE wasn't the issue after all). Does anybody know what exactly is going on? -
Which one is better purely for thermals? Thanks for all of your advice!
-
From the album: PC
Personal Rig (2560x1440 Image) ASRock Z77 Extreme 4 Intel i7 3770k OC @ 4.5Ghz Corsair H100i Asus DCUII OC GTX 780ti 16GB Corsair Dominator Platinum Samsung 850 Pro 256 GB (Boot Drive) Samsung 840 Evo 256 GB Samsung 840 Evo 120 GB Western Digital Black 2TB Western Digital Blue 1TB Corsair AX860i -
From the album: PC
Personal Rig (1920x1080 Image) ASRock Z77 Extreme 4 Intel i7 3770k OC @ 4.5Ghz Corsair H100i Asus DCUII OC GTX 780ti 16GB Corsair Dominator Platinum Samsung 850 Pro 256 GB (Boot Drive) Samsung 840 Evo 256 GB Samsung 840 Evo 120 GB Western Digital Black 2TB Western Digital Blue 1TB Corsair AX860i -
im having problems with my idle temperature on the i7 4770k my idle temp was 38-43, i have the corsai h100i as my liquid cooling and im still getting bad temperatures NO OC, im using the asus maximus vi hero mobo, so if anyone can help me please comment thanks
-
im having problems with my idle temperature on the i7 4770k my idle temp was 38-43, i have the corsai h100i as my liquid cooling and im still getting bad temperatures NO OC, im using the asus maximus vi hero mobo, so if anyone can help me please comment thanks
-
Corsair H100i installation problems please help
Jason Jamelo posted a blog entry in Jason Jamelo's Blog
Hey guys, i have a COUGAR SOLUTION cpu case http://www.cougar-wo...solution.html motherboard is 880GMS-E41 http://www.msi.com/p...MSE41_FX.html The reason behind why I posted this, I'm planning to buy a CORSAIR H100i cpu cooler http://www.corsair.c...id-cpu-cooler . The problem was, I'm too hesitant if it's gonna fit perfectly with all the radiators and fans attaches to top of my CPU CASE or not, because the positioning of my MOBO's RAM is too high, its like inches away until it reaches the top of the CPU CASE. I'm so obsessed of making my rig water cooled. I really want to make this happen. Please guys suggest me what's in your thoughts coz this is my first time to build my own gaming rig, so I have limited knowledge about these aspects. I will be very glad to read your comments and suggestion or even criticism ..hehe GOD SPEED! > I included a photo of my rig below :) -
From the album: My PC
No More crappy AMD Stock Fan. -
Hi, I recently built my new pc with a ryzen 7 5800x cooled by a H100i. I'm not sure if it's because I'm not used to how loud AIO coolers are but it seems to be very loud. I thought maybe it's runing hard becaue the chip is runing too hot because of a bad mount. I usually get about 75 to 80 degreed celcius while gaming. Is this too hot?
-
Hey all, been having some cooling issues for a while, pc would run 89c+ passively while making a lot of noise, 99c when doing almost anything. Wondered if it was air in the cooling block, so I did the tilt it back and forth method and that fixed the noise. However I appear to have made it worse? now just sitting on my bios it climbs to 95c+ and one of the two pipes from the cooling block is also hot as hell. Stuff to note; thermal paste applied in pea size amount, mounting performed correctly, hardware I7 4000hz cpu cooler Corsair h100i I assume maybe now there is something stuck in one of the pipes? I noticed when I last remounted there was a little (1.5mm) blemish like a burn on the copper plate. Any help would be greatly appreciated.
-
Hi all. At my wits' end with this. Seems like I'm the only one having this problem, lots of people with kraken g12's and h100i v2's reporting success. Booting into windows and checking temps with gpuz shows 93-102 temps before it shuts off. Seems like the block isn't making contact with the die, but I tightened the bajeezus out of the screws and it's as flush as it will be. Only thing I can think of at this point is a dead pump (will test on cpu once new thermal paste arrives), though I can hear it, and the tubes being so stiff that they're pulling the block off the die. But then again no one else on the internet running a similar setup seems to have this problem. Any advice would be highly appreciated. Thanks. PS pump makes a clicking/gurgling noise at startup for a while, I read that it's a common issue with h100i's and air pockets. Maybe it's broken idk anymore but even if it's running badly at least it's running, temps are so bad I'm leaning more towards bad block-die contact. PPS gtx 770
-
Greetings, The i7 10700k is hot, I wonder what would be the temps paired with a corsair H100i RGB PRO XT (https://articulo.mercadolibre.com.co/MCO-569993714-refrigeracin-liquida-corsais-h100i-pro-xt-rgb-_JM?quantity=1&variation=59674852851), I can´t find any info about this, would those temps be acceptable? Notes: -the i7 10700K would be overclock at least at 4.9 Ghz all core. -The case is a Aerocool Cylon https://aerocool.io/product/cylon/. Thanks.
-
Hi guys, I currently have a 465X that includes 3 LL120s on the front. I plan to purchase an h100i Pro RGB Platinum that includes 2 ML120 Pro, and also purchase 1 more to complete the build. My idea is this, put the LL fans on top and one on the back. The 3 ML fans on the front along with the radiator. To control all of this, I need to control RGB on one hand and fan speed on the other. 1) Is it possible to connect all 6 fans to the Node Core that includes the 465X? Considering that they are two different models. 2) The h100i's pump allows up to 4 fans to be connected to control the RPM. Is it possible to get 2 x 3-way splitters and connect each one, to one of the corsair splitter ports? In this way I could connect the LL in one 3-way and the ML in the other. 3-way Splitter https://www.amazon.com/-/es/Splitter-Computer-Extension-Converter-TeamProfitcom/dp/B07F8LV1BY/ref=sr_1_3?__mk_es_US=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=fan+6+port+pwm+repeater&qid=1595279835&sr=8-3 After much thought, it was the best thing that occurred to me. Any better ideas without having to buy a Commander Pro? -
Hello there LTT, its been quite a while since I've been on here. I recently bought a second hand PC which has the follow parts:- i7 8700k Corsair H100i MSI Krait Gaming Z370 motherboard 16gb DDR3 Corsair 3200Mhz 500gb WD M.2 SSD 1 TB Curcial P1 M.2 SSD Aorous RX 5700 XT so basically I know that the Krait is a budget orianted board but I want to upgrade it as well as the CPU cooler for overclocking. but I really don't know where to start first, should I replace the mother board or just get a new cooler. for the motherboard I've been thinking about the GIGABYTE Z390 AORUS Ultra, and for the cooler I've been thinking about the Kraken Z63. thanks!
