Search the Community

I have just built my new gaming pc and after checking all my cables were all in place and connected I had plugged it in and powered on, I was met with no display( I did plug my hdmi cable into my gpu) but I had seen LEDS on my mobo light up, it ran through orange first then red and then stuck on white followed by a green light after a couple seconds. I have tried reseating the gpu, I tried a different gpu and had the same result. I am also no using the plug that came with my psu because it was a 2 prong plug and I need a 3 prong plug so I used a plug that came with a different psu. Another thing to add is that approximately 2-3 seconds after booting I hear a click from my psu, idk if this is normal or it’s my psu that has a problem. Here are my specs Mobo: asus rog strix b550-f gaming cpu: r7 5800x gpu: rtx 2070 super gigabyte windforce ram: 16gb ddr4 3200mhz Corsair vengeance case: nzxt h5 flow cpu cooler: hyper 212 halo black psu: Corsair rm750x update: I was able to post by reseating the cpu and using a different gpu but can’t get into bios with my gpu

Hey all! First time posting here me know if I missed anything. TLDR: No post. Asus b450i gaming motherboard White VGA LED + Green LED Specs: - Windows 11 pro 64 bit - PC case: Phanteks evolv Shift - Motherboard: Asus B450 -I Gaming (not sure but latest bios install was BIOS 4602) - CPU: Ryzen 2700x - Ram: 2x 16gb Kingston hyper x 3200 mhz 32gb - Graphics card: AMD Vega 64 Liquid cool. - PSU: Corsair 750watt Problem: PC started up with RGB firmware update. Never seen this before and seemed to take some time. I googled it and found out that people said it could take 45 min, some took over 8h, some people just turned off their PC and worked after, mine took 2+ hours and continued to be on the same screen. Despite the warning I turned the PC off as I had to work that day with my pc from home. Ever since then I am having boot issues, as the warning suggested. I once was able to post into that American Megatrends boot window with the message I had to reset bios for it to boot but I did not have a keyboard attached as I was trying multiple things to repair this problem. Ever since then It does not boot / post. All the motherboard is showing is the white VGA LED but after some time the green LED turns on too at the same time as the white LED Things that do work: All the LEDs on my motherboard are working, also the RGB on the side of the motherboard. My keyboard is turning on its RGB lights. Fans are spinning and the lights on the graphics card are on as well. Things I have tried: Starting the PC without GPU Starting the GPU without GPU and then with GPU Reseating Ram One Ram stick. Ram stick in different slot. No USBs attaced. Different HDMI Cables. Tho they are working as I am using them on my older machine to work. Clear Cmos pins. Clear Cmos with battery. had it out for 3+ hours. I feel I have the motherboard in some update state where it does not know what to do any more. I am running out of options I feel and I am unsure what to do I hope I have not bricked my board! PS: I have updated bios for updating to windows 11 literally a week ago for the security enhancements. It was working perfectly fine before the RGB update. PPS: Image from reddit but same update message on my pc

Hello everyone, I've just completed building the pre-build test workbench and connected my system up to the psu. Turned it all on and started looking at the motherboard to see if everything goes on correctly as well as on the display. The display itself works great, I can access BIOS and it does show the ROG STRIX logo when it boots up, but it seems like the system had ran into an error while booting up. The green QLED on the motherboard has lit up ("BOOT" is next to it so I guess it's for the boot up) and I'm not too sure if that's normal or not, because most people who had the same issue either have no display at all (even while plugged into their gpu), or are still waiting for a response on their post from 2 years ago. I've tried double checking my M.2 SSD (samsung NVMe 980), moving it from a 4.0 to a 3.0 M.2 socket, and a few other things but to no avail (so far). Although I have not yet installed windows on the motherboard as of making this post, so I wouldn't know for sure if that's the problem since everything shows up fine in BIOS. If any of you have experienced this before or know of potential issues that could be causing this, I'd appreciate any help!

In past years I successfully built maybe a dozen computers, so my current new project is a datacenter server. I just assembled the new server with dual Xeon CPU’s, yet when I plug in the power cord into the PSU and turn on the power on back of the PSU, and then press the front panel power button, the server remains off. To provide further context, when I turn on the PSU’s power button on the back. On the inside of the servers case where the front power button is at, a white light rapidly blinks about 7 times. That as well as on the motherboard near the same spot a green LED blinks, also about 7 times. Just as those two lights stop blinking, a separate LED in between where the PCI-e slots are located. That LED blinks green twice and repeats the double green blinking ongoing. I’ve re-seated all four RAM modules into their respective P1-DIMMA1, P1-DIMME1, P2-DIMMA1, and P2-DIMME1 slots, removed and re-inserted the CMOS battery, and removed and re-seated the SSD drives. Also removed the motherboard from the case and removed 3 extra standoffs that were excess. Yet even with everything re-inserted and re-assembled. I’m still getting the same repeating double green blinking LED and the server still doesn’t do anything when the front power button is pressed. The only thing I haven’t attempted yet, is removing and re-inserting the CPU’s…which I’ll be doing later tonight. But in case that also doesn’t help. I wanted to ask here, based on my description, if I might have missed something. Also the server I built has the following: Dual Intel Xeon Silver 4316 CPU’s SuperMicro X12DPi-NT6 E-ATX Motherboard TPM 2.0 module 256GB’s of Micron DDR4-3200 RDIMM (4 modules of 64GB) 2 Noctua heatsinks for the CPU’s NH-U12S DX-4189 Fractal Design Define 7XL tower case 2 M.2 NVMe SSD Drives of WD_BLACK 4TB SN850X Corsair AX1600i PSU 1600 watts Also the motherboard only had an M.2 slot for one SSD, so I used an adaptor to insert the second SSD drive into the top PCI-e slot.

PLEASE HELP. I NEED REAL GUIDANCE !!! IM fed all the way up w the bs. dude who built it dont answer anymore guess its to much trouble for him even tho he claimed any of his builds have 1 year warrenty. tried to upload pics before i posted this but im going to post it then get off n get back on to put pix up again. so i got this pc i had a guy build for me pretty cheap said i didnt care how it looked just about performance. that was ny 1st mistake but didnt thank id be here this soon all things not considered untill times like now where im stuck in the dark. i never have played any games at all on any of my computers/ or my phone. i dont care about surfing the internet on my main computer, i only need it to run 1-2 DAW like fl studio12 and a 10-25 processor hungry aftermarket vst plugins (vst2/vst3) i have. i do have copies of on my little 2tb my passport external hdd. i bought this damn machine he built about 3 months ago a guy thats local i contacted on a buy sell app was selling comp parts n i was lookin to have a "budget build" done asap but i also had some important issues i had to address with my finances so they were limited now their little to nothing in terms of income... fml... so a little over 580$ towards this comp he built and delivered to me which ran fine for a month & and a half then 1 day died and ever since that day ive been pullin my fuckin hair out stressed out because im no longer able to make music which is my passion my life and atm MY INCOME (cant make music = bills and shit up to my neck debt) . . so 1 day i am eating my dinner in my space and fl studio was open but i hadnt opened a project or started nothing at all because i was eating across the otherside of room well as soon as i sat down to start picking instruments out to complose a beat i noticed the strong odor of BURNING COPPER!! took a look inside the case from the vented side panel didnt see any smoke or fire but still smelled itso i went to shut down pc and before i could turn it off/unplug power supply. I heard a unknown noise i thought came from the desktop tower and all a sudden the picture on my screen went off in a fucked up pixelated/ matrix style looking crash type of way like it had been put in a blender... idk its given me nightmares n flashbacks ever since. the guy who built it came n swapped out motherboard, gfx card, n power supply once but we couldnt get it to boot windows soooo he came back next day again at my house for 4 hrs with me and brought his comp and more parts and swapped the mobo wit another board which is the red and black biostar in pictures. the green hp board is the 1 i bought after the biostar stopped working and did the shut off bs and and never came bk on. idk sumn is fucked up with sumn and idk what i did to deserve this but please God let this be over and by this i mean the issues w my setup and compter related problems cuz its killin me. all i want is my shit to work properly so i cant get back to working and persuing my passion this is beyond stressful in my position. im tooo behind on bills now and this is does nothing but pissin me off to the max and youtube is starting to make me jealous with all the tutorials of badass gaming rigs n all that bs i been paying attention to linus for a while now way before i built this pile of shit i call a computer but anyways . Idk what but i know from my previous exp. with this comp and with my much lower performance pcs in the past it should has handled the demanding plugins and software no prob. i also have a dinosaur that still runs that i saved from sum1 bout to pyt it ina dumpster and it still turns on and runs no prob makes no fucking since its a dell optiplex gx620 the big tower when i first got it it said the last time someone TURNED IT ON WAS 2006!!! so in my optinion i have a Hidden hardware issue somewhere i cant see idk but at this point im almost overwhelmed cuz know it ran fl studio12 perfect for a short 1.5 months it worked beyond great without any latency, lag or glitches at all!! so it shouldnt have any issues running any of it when it has done it before pluginss such as; refx-nexus2, the whole fabfilter bundle, omnisphere, & etc. i have tore down the machine and carefully reset all connectors or been troubleshooting for the past 3 months strait seems like and have rebuilt entire setup about 4+times proly more... ive bought a seperate mobo w same chipset and stilll no boot just solid greenlight on top right of mobo with new mobo... im lost n im fairly new to pc building but ive been working with fl studio since i was 13 i am now 30 my bday is in like fuckin 6 days and ive been on the verge of giving up since it quit working which will lead to a whole other list of problems. i need an expert to help because im lost since i did the mobo swap im temped to install the 1st

What the title says. Good green LED fans seem to be hard to find, especially 140mm ones. Any suggestions, preferably quiet ones?

I'm getting a new case soon and I want to buy an extra fan as well. It would be in the front sucking air in, and the only fan I found that has green LED lighting is THIS. As far as I know Revoltec is a pretty mediocre company, not too bad, not too good. If anyone has any experiences with it, could you please share them? It's not really the performance that I'm most curious of, but rather how silent it is.