Search the Community
Showing results for tags 'dimensions'.
-
hey all, this is my first post. I am planning a build using DanCase C4-SFX and I am trying to figure out which GPU’s fit with no modification to the GPU. I first saw this case in a Linus Tech Tips video where they modify a Gigabyte Aorus RX 7900 XTX to fit it. Then I saw a video by Optimum showing an MSI RTX 4080 Gaming X Trio fitting with no modifications. The Gigabyte is 335mm long and doesn’t fit in Linus’s video, DanCase states 336mm as the max length, and the MSI is 337mm and fits no problem for Optimus. I want to put a Gigabyte RTX 4070Ti which measures (336x140x58) GPU dimensions Gigabyte Aorus RX 7900 XTX (335x137x69) MSI RTX 4080 Gaming X Trio (337x140x67) Gigabyte Gaming OC RTX 4070Ti (336x140x58) LinusTechTips GPU does not fit w/o modification: Optimus showing it fitting just fine: Any help or insight would be greatly appreciated. best regards, K
-
Hey I have the Gigabyte B550 GAMING X2 motherboard and I'm planning to get a 1660 super I have researched the dimensions of the mobo and cannot find any information on the measurements I cannot measure mine correctly. on the motherboard this is in the way --> https://imgur.com/a/bk5ysiZ and my current gpu just about fits. for anyone with similar motherboards, will it fit or will I have to get a new one thank you! dimensions for 1660 super are Slot Width: Dual-slot Length: 280 mm Width: 117 mm Height: 40 mm according to https://www.techpowerup.com/gpu-specs/gigabyte-gtx-1660-super-gaming-oc.b7394
-
Greetings and salutations, I am, new to this. I also need help finding a pc case that can more or less fit into certain dimensions, so here are the details. I have an atx mother board, with an atx power supply. Mounting a phenom ii 965 be. Two years ago I bought an 82 uhdtv, its thin, it was a pain to install and I am not moving it. The pc runs the games Im playing fine, some even 4k. Installed a shelf under the tv to hold a few things and left space under the shelf for a few crates for hardware. Not finished. Either way. My pc doesnt fit under the shelf or on it. These are the maximum dimensions under the shelf. 34,3h-24w. With cm. I can play a few cm with the width. I cannnot play with the hight. ¿Is there any case in the market that could actually comply with that dimension without costing 100 dollars? I will not change the motherboard or the power supply if i can evade it. Price range, less is better. Way over my head and wallet with retro stuff already. Many thanks in advance. P..D: Should have stuck with emulation and yes, the door can open and close almost to its full. I could just lay down the atx case buth something smaller would look better?
-
Hello LTT Community, Today I had an idea of making my own SSD sticker, but I coulnd't find any help regarding the sticker on top. I just need the dimensions and thats it, Thanks alot.
-
Hi, Can somebody who owns or has phisical access to Gigabyte RTX 4070Ti Gaming OC measure its exact dimensions? I know that officially it is L=336 W=140 H=58 mm, but I'm not sure if it's with or without mounting bracket and I need the length of the card without bracket to check if it fit my case. Thanks in advance
- 2 replies
-
- gigabyte
- rtx 4070 ti
-
(and 2 more)
Tagged with:
-
Budget (including currency): ~3000 CAD Country: Canada Games, programs or workloads that it will be used for: MSFS Other details: i am setting up for a home simulator, the only thing missing is the brains, however I've never built a PC and I'm trying to be cautious and make sure things are compatible. If it matters, I'm running it with a samsung oddissey g9. Here's my list of parts. https://ca.pcpartpicker.com/list/QBnRmr I'm not in a rush, so don't worry about inventory. Additionally, I will be getting braided wires, hence the white PSU. Also will be getting chromax covers for the CPU cooler. Any advice/recommendations are welcome.
-
I am taking an inventor class for college and we had to pick an item that has at least 10 pieces. I chose a Lego mini-figure plus some accessories for it. The only problem is I do not have the exact measurements of the figures. I tried to dimension them myself but some are nearly impossible to get. Does anyone know any site that lists all the dimensions and pieces of a Lego mini-figure?
-
Hey! if someone could give me the inside sizes (please in MM) of the inside top panel of the S340 elite (see picture) you don't have to include the front panel I/O connector because i will most likely remove those anyway. i'm planning to put a 360mm rad in the top (it's 400mm long) so if someone knows if it's posible that would be great to. thx in advance!
-
Hey guys So my lan pc is a modified dell 3100 sleeper with a mobo out of a 755 optiplex so i could use a Q6600 and 8gb ddr2. I bought 2 gtx 480 watercooled card and they work fine but i want to run both not just 1 (im aware of the bottleneck but a xeon upgrade will lessen it) now the only btx board i can think of that has 2 pcie slots with sli support is a xps 720 board but i cant find the dimensions for one anywhere. Any ideas guys? NOTE: this is just a fun project of mine i do have a mutch better pc so dont try and tell me to a budget pc because this all up has only cost me about $60 AUD and im happy with its peformance.
-
i need mounting dimensions for a "EK-XRES 140 DDC 3.2 PWM Elite Pump/Reservoir Combo " that would be really handy if anyone can grab them for me. i dont want to use the 120mm mount plate, as where i theoretically want to place it it needs the to have a smaller foot print yo avoid interference with other components
- 2 replies
-
- mount
- mounting points
-
(and 1 more)
Tagged with:
-
I'm looking to upgrade my old system and my choice has been converging on Asus Prime x370 Pro board. I do however have one concern. In the case I have, the clearance between the top vrm heat sink and the radiator is extremely small)(see picture).There is no alternative mounting space for the radiator or the mobo, the case is Corsair Obsidian 550D. If anyone has that mobo, could you measure the height of the top vrm heatsink from the PCB? I cant find that information anywhere. I'm assuming the thickness of the PCB is the same as on my Gigabyte board As an alternative, if someone knows a good ryzen board that doesnt have the same issue, feel free to recommend it. Thanks!
- 5 replies
-
- motherboard
- vrm
-
(and 4 more)
Tagged with:
-
As a project for my BTEC Level 3 Mechanical Engineering qualification I will be building a test bench that can house mini-ITX, micro-ATX and ATX motherboards. So far I have struggled finding any images that show the dimensions for the screw locations for all of the motherboards. My request is that someone in this community can recommend sites to look at or even link me to the images. Thank you in advance. tl;dr I need images of motherboard dimensions (ATX, mATX & mITX)
-
My setup is a 32" Samsung TV in DVI mode flanked by 2 24" Acer monitors. I haven't found a single way in the AMD control centre that lets me adjust according to the size of my monitors. Everytime i try to set up eyefinity it acts as if they are all the same size and thus nothing is alligning. I've tried almost every combination possible in CCC. HELP PLEASE!!
-
So I want to get a graphics card that has the dimensions of 38.4 x 20.6 x 15 cm and my case is going to be 43.2 x 21 x 49.5 cm what mainly concerns me is the width (20.6 cm) on the graphics card and on the case (21 cm) and the case also has a cable management compartiment behind so will it fit or should I buy another case?
-
Alright so i need a little help so i thought i would post here Would my GPU Have enough room to fit inside a Corsair Carbide Air 540 with a Corsair Hydro H150i PRO RGB 360mm CPU Cooler installed in the front of the case? The dimensions for the Radiator are 39.6 cm x 2.7 cm x 12 cm but i am not sure if that is with the fans installed or just the Radiator itself. My GPU dimensions are 29.8 cm x 13.4 cm x 4 cm. The Case Dimensions are 41.5 cm x 33.2 cm x 45.8 cm. Thanks.
- 10 replies
-
Hey, i'm planning a build and the only part im missing now is the case. I've been eyeing the Meshify C Dark TG. I have already got an NZXT Kraken x62 and an Asus ROG strix gtx1070. I am now wondering if i'll be able to squeeze the radiator with two fans in the front along with the Strix 1070 inside the meshify. The GPU is supposedly 298mm in length, the radiator 30mm thick and the fans 25mm. The meshify C allows for 315mm gpu's max with a fan installed, im guessing it is a 25mm thick fan, and 335mm gpu's without fans. In this video the fans are put outside the frame and the radiator inside the frame allowing for the use of two fans and the radiator in the front. Does anyone know if this is possible with the meshify C or only with the define C's front panel ?
- 12 replies
-
Hi, I'm planning to buy a combo on Newegg existing off: Asrock Extreme4 Z370 - Motherboard i5 8600k - CPU Corsair Vengeance LPX 16GB (2x8GB) DDR4 3000MHZ - Ram/Memory Link to the Newegg combo: https://goo.gl/i2G6E8 I am from Sweden and I am gonna ship this using an external shipping site to ship it to me for a better price. To make that happen on some websites I need all the dimensions of Height, Length, Depth and Weight and some only require weight. Is there someway I can measure the weight of the items. I don't know if the items will be shipped separate boxes or all in one. It might be different for this one specifically since it's a combo. It's probably hard to measure the exact weight of the item and there's no way to know the weight of the shipping box as well. What I'm looking for is people that have any knowledge about: The weight of i5 8600k (not the actual processor) either the weight of the box with the CPU and even better if including the shipping box and even better then that if it's a Newegg shipping box. The weight of the Asrock Extreme4 Z370, either the weight of the motherboard and even better if it is with the motherboard box and even better than that if it is including the shipping box and even better then that if it's a Newegg shipping box. (Sorry for writing in a mess). Like the previous one but this time with the Corsair Vengeance LPX 16GB, So the weight of them even better if it's with the box, even better then that if it's including the shipping box and once again even better if it's a Newegg shipping box If a Newegg combo comes with 1 single box or separate. Someone that has purchased maybe this exact combo or something similar on Newegg or other, and of course one of the items (if someone has them). I would also be really happy if someone could recommend a good and importantly cheapest way to ship it from the US to me in Sweden. Happily recommend sites to use for this external shipping and one's not to use. Some I am currently looking at is: https://www.myus.com/ https://www.shipito.com/ www.borderlinx.com I also have 2 uncles in the US that can help with this and ship it to me, but it is only relevant if it's cheaper. I know this is a lot of question but it will really help me Thank you in advance.
- 5 replies
-
- weight
- motherboard
-
(and 3 more)
Tagged with:
-
I'm in the process of designing a PC case (hobby, not professional) and I cannot for the life of me find the dimensions for any reservoir mounts anywhere. I'm tempted to contact some companies to see what they are because I was told on the LTT discord they aren't standard. I'm trying to look for some common dimensions or at least guidelines to what I should use, I know some cases have reservoir holes integrated but I don't have access to any. Any help would be greatly appreciated!
-
im getting a s340 elite but i do not know if my psu is going to fit in in it. does anybody know the size for the psu slot or a way to find out if it fits. Thanks in advance
- 4 replies
-
- case
- dimensions
- (and 4 more)
-
Hi friends, I want to put an MSI Z370 GODLIKE GAMING board in my Thermaltake Core X-71 Tempered glass case. Here are the dimensions: Case: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) Board: 12.0" x 10.7" Now obviously the dimensions say it doesn't fit, but WILL IT FIT?
- 23 replies
-
Hello all, I posted something recently regarding this case, however the thread died (either that or I'm way too impatient), so do any of you know the dimensions of the GPU enclosure for the Silverstone ML08? And how large is the maximum video card length if I want to have a 3.5" drive? There is no information on the Silverstone website (http://www.silverstonetek.com/product.php?pid=607&area=en) regarding this. The GPU I would like to use is 211mm long Thank you for reading.
-
- silverstone
- gpu
-
(and 4 more)
Tagged with:
-
Hi guys can someone please tell me if this motherboard will fit in the case? It says up to 270mm but is it a vertical or horizontal measurement? Motherboard: ROG Strix X370-F Gaming Case: Corsair Crystal 570X
- 3 replies
-
- motherboard
- case
-
(and 1 more)
Tagged with:
-
http://comparesizes.com/ Found this site which gives a relative comparison between objects of different dimensions. Maybe useful to compare case sizes, thought to share here.
-
Hey everyone, Does anyone know the dimensions of the stand that goes with the Acer Predator XB271HU? I can't seem to find the dimensions anywhere and I am concerned about the legs of the stand being too wide/long. Any info would be greatly appreciated! Thanks