Search the Community
Showing results for tags 'antlion'.
-
so not much I have a antlion modmic that I can see the pc notices it but doesn't pick sound. troubleshooting doesn't work since the PC sees it working perfectly. tried physically resetting the modmic, removing it on pc electronically, and then physically remove it and plug it back in. restarting my computer. but the computer does pick up sound through my lg webcam. windows did have an update
-
We've teamed up with Antlion Audio to giveaway 3 of their ModMic 5's and a Hifiman Edition S/ModMic 5 combo! Details are on the giveaway page! Winners will be contacted via email. *Winners: TBD (Waiting for responses) Giveaway Page: https://gleam.io/g1LW7/antlion-audio-modmic-5-giveaway ModMic 5 Purchase Page: http://geni.us/12jjKA7
-
V-MODA BoomPro ($30) Accessories: (1) 3.5mm Y-Splitter (1) Single line velcro strap Build The BoomPro starts with a 3.5mm connection which splits into the boom mic and the rest of the cable. The boom mic is very easily adjustable and holds its position decently. I say this because the mic will occasionally droop a slight bit, which may or may not bother some people. The cable is 79” (200cm) long and is reinforced with fabric wrapping. The cable is slightly on the stiffer side. There are several points where the cable will not fully straighten from how it was wrapped inside its box. If the cable were more plush, I feel it would straighten out more naturally, but it does not affect movement as it is right now. About 12” (30cm) down the cable, there a 1”x1” (2.5cm x 2.5cm) module for controlling the volume and muting the mic. The connection points here are also reinforced, which makes the total length of the module about 3” (7.5cm) long. This adds a bit of heft to the cable. I’m not sure if it needs to be so large, or if it could somehow have the width reduced to make it feel more like a cable instead of a cable with a box built into the middle of it. There is a clip on the module to help alleviate the extra weight somewhat. The BoomPro terminates in a 45 degree 3.5mm 4-pole connection. Compatibility Full compatibility with just about (some people have reported that it did not work with their headphones, so I will not be including an absolute statement on compatiblity) any headphones with a single 3.5mm removable cable. The microphone is easily compatible with console gaming. For the PS4, no adapters are needed. Just plug the 4-pole right into the headphone port into the DualShock 4 controller. For the Xbox One, it would depend on the controller. The first generation controller would need the official headset adapter from Microsoft, but the second generation controller with the 3.5mm jack will be compatible without any adapters. It should be noted that if your headphones require more power, then connecting an amplifier will still be necessary. Then the setup becomes slightly more complicated with the use of the Y-splitter and possibly needing a ground loop isolator to eliminate static or high pitched sounds. Sound The microphone captures voices really well. It is permanently set in omni-directional mode, so background noise will be apparent. It does a decent job in keeping the majority of the outside sound out, but my keyboard typing test using Cherry MX Browns and Cherry MX Clears can be slightly heard in the background. Mouse clicks can occasionally be heard as well, but all the background sounds are very much subdued. This makes for a very pleasant experience in chats and even video recordings. Antlion ModMic 5 ($70) Accessories: (1) Cable wrap (10) Cable clips (1) Mute switch module (2) 3.5mm Extension cables (2) Magnetic base clasps (1) Alcohol wipe (3) 3M adhesives (1) Pop filter (1) Carrying case (1) Microphone/Headphone 3.5mm to USB adapter (1) 3.5mm Y-Adapter Build The ModMic 5 is very solidly built. The mic comes with a thick pop filter that barely covers the entire microphone portion of the boom mic. It does not seem to have any negative effects on the sound quality. The microphone portion contains a switch to swap between omni-directional and uni-directional modes. The shaft of the boom mic is reinforced with sturdy plastic. It can be adjusted at the desired angle, and it does a decent job at holding it’s form. The magnetic clasp is stronger than the previous versions to help reduce accidental drooping of the mic when you move your head too suddenly. The mic then makes a u-bend into a reliable looking strain relief. The cable on the main mic is about 8” (20cm) long, terminating into a 3.5mm jack. The two extension cables feel almost too flimsy, but is acceptable for in-home use without too much rough usage. The mute switch module can be used in-between any of the 3.5mm connections. For something that only performs one function, the module feels too huge. It adds unnecessary heft to something that is already adding a second cable onto your headphone/microphone combo. Both of the adapters are solid blocks instead of wired splitters. This may or may not be a problem with connectivity depending on if it blocks off adjacent USB ports or hits ledges near the USB/3.5mm port. The block portion of the adapters are both about 1” (2.5cm) wide, 1” (2.5cm) long, and ½” (1.3cm) thick. The worse (and thankfully optional) part of the setup is the cable wrap. It is about 79” (2m) long, and is made of some sort of weaved plastic material. A lot of people had problems with the cable wrap fraying when they cut it, which prompted Antlion to supply a couple of ways to properly adjust the length of the cable. One way is to use a lighter to burn the ends where the wrap was cut to sear the ends. The second way is to use nail polish before and after cutting. This all seems to be more effort than necessary, and adds even more heft to an already cumbersome setup with multiple cables going from your head and added weight of all the additional optional accessories. Compatibility In regards to compatibility with headphones, the ModMic will work on all of them. There does not need to be a requirement of a 3.5mm jack. The magnetic clasp will stick on just about all surfaces unless there are a pair of headphones with a fabric type surface. Yes, the 3m adhesive will even work on the grills of open back headphones. Similar with the V-MODA BoomPro, the ModMic 5 is compatible with everything as long as you use the appropriate adapter. All of the adapters are included for you in this case, but new ones may need to be purchased if the adapters blocks get in the way of connecting to ports. Sound Unidirectional When the mic switch is switched to unidirectional mode, the single inner microphone will be active. This mic is aimed at the user and will reduce the majority of background noise. When typing on my mechanical keyboard and excessively clicking my mouse, there was very minimal background sounds being captured by the mic. This mode is great for a semi-noisy room, but it comes with one caveat. The user’s voice sounds very much muted or muffled as well. This mode cannot be recommended unless reducing background noise is an absolute necessity during a chat session. Omnidirectional This mode is where the ModMic 5 shines. When the switch is swapped to omnidirectional mode, the two microphones at the end of the mic boom is activated. It captures the best representation of your voice of the two modes. Background noises will be heard, but those are slightly muted. Typing on my mechanical keyboard and the excessive clicking on my mouse sounded slightly muffled, while my voice was clear and concise. Unless there is unwanted chatter in the room, this mode is the suggested mode of the mic. Conclusion So how do these mics compare? If I had to give a 1-10 score to each mic, I would say the ModMic 5 Omnidirectional mode scores an 8, the V-MODA BoomPro scores a 7.5, and the ModMic 5 Unidriectional mode scores a 6 in terms of sound quality. Although the ModMic 5 Omnidirectional sounds the best from the tests, the BoomPro is only very, very slightly behind it. The high price tag on the ModMic 5 comes from the ability to switch in-between the two modes, the upgraded build quality from its previous version, and the large amount of accessories. However, the V-MODA’s build quality does not fall short all the while holding onto a very competitive price. Giving the price and performance, I would have to go with the V-MODA BoomPro your headphones are compatible (or modded to a 3.5mm jack to be compatible). Otherwise, the Antlion ModMic 5 is compatible with all headphones with its magnetic clip, but it comes in at more than twice the price as the BoomPro
-
Hi guys, I got myself a nice pair of HD600s to replace my Kraken. Back then I got the little Zalman lav mic that is sort of bad... Recently I upgraded that to a Mod Mic 5 und my Motherboard to an M Power Gaming Titanium. It has quite good onboard audio and it sounds nice when I record a short clip in Audacity, but for my friends to hear me in Discord, Teamspeak, Skype etc I need to amplify it via software +10 dB which obviously sounds terrible. Do you have any ideas how I can fix this?
-
I was looking to get a microphone for online gaming and possibly making YouTube videos, and I am nearly out of space on my desk, so a Modmic would be a great option for me (I already have a pair of Bose QC 15s). However, the Modmic 4 is only $40-50, and the 5 is around $70. Is the modmic 5 really worth the extra cable management options, slightly better sound quality, etc., or should I get the cheaper Modmic 4? Thanks!
-
So I just bought an Asus Xonar DGX for my Antlion mic and its not working. I look in my sound manager and nothing is making sound for the mic. I tried the "fix" that some have suggested (change input to headphones and change front mic to microphone) but I still get no results. I'm using a modmic 4 and am running version 7.12.8.1800 drivers. This also may be unrelated but I see on their website there are higher version drivers but when I try to click download I get sent to a page that is nothing but jumbled code. I also have the CD but my drive isn't working right now. I doubt that has anything really special though. Thanks for the help in advanced.
-
I've tried the most I can imagine. Tried several different usb ports, reinstalled the mic drivers. I even tried another usb audio device but still no luck. I made sure to face the direction of the small icon on the mic towards my mouth, its around 2cm from my mouth so I dont see how it can be possible that Im too far away. Even my g930 mic sounds better than this crap. If I try with max audio decibel increase i get very low quality sound. What should I try? I've also included a test with the mic so you can hear for yourselves. microhpone test.mp3
-
- antlion
- microphone
-
(and 2 more)
Tagged with:
-
Using a AntLion ModMic 4 and the foam finally deteriorated, FeelsBadMan anyways looking for a replacement foam that fits or alternative way to act as a windscreen. What do you recommend? Additional background info I live in the USA willing to spend no more than $20 USD
-
Today when I went on my DIscord, I found that my microphone was randomly making loud 'popping' noises. So, I looked into this further and used the listen to this device feature on WIndows and it seemed that when I moved my mic at all, it would making a loud popping sound. Then, I remembered that I had a USB sound card. So, I plugged that in and the issue persisted. There was no popping yesterday; it was only this morning that it started. Any help would be greatly appreciated, thanks!
-
- microphone
- antlion
-
(and 3 more)
Tagged with:
-
So i bought the Modmic 5.0 and i am going to put it on my headphones and then i saw that the modmic worked really good with the dt7070 so i wanted to buy them but i am unsure if the dt7070 will work with the antlion usb adaptor because i wanted that adapter for my modmic 5 DT770 80 ohm
-
Hey! I was looking for some directions on what soundcard I should get for my ModMic 4.0. I don't really need one with good audio output, since I'm already using an Fiio E10k for my headphones, but at the same time I realize I'm not going to find one with microphone input only. The reason I need one is because the white noise created by my motherboard is way too much, and from what I gathered from the internet a simple, small and cheap usb soundcard would fix the issue. And while it did help, it didn't help by much. Maybe I should have bought a slightly more expensive one? Alright so anyways, I was looking for a soundcard, external or internal, that would fix this issue. However it's very difficult to find the correct one. I don't want to end up overpaying for features that I won't need since I already have a good enough AMP/DAC. But on the other hand, I don't want to end up realizing that I might have gone a little too cheap, once again. I'd really appreciate all the input I can get. Thanks
-
Hey guys, I am hooked on the whole Antlion Modmic idea and since my old Creative Labs Fatality Headset broke down last night I decided it is time to finally buy one myself. What Headphones (That are in a reasonable price range (max. +20€ than Modmic itself)) would you recommend? I usually play alot of games mostly CS:GO on my pc but I also listen to music, I like it more bass heavy but highs and mids sometimes too are important for cs:go. Oh and I am in Europe, please don't make me jealous by posting something that I cannot get here Thanks in advance though. Nice.
- 4 replies
-
- headphones
- antlion
-
(and 1 more)
Tagged with:
-
Hai! I'm about to get a hold of my new Modmic 4.0 (yay for Massdrop), And I don't have a dedicated soundcard or or some external piece to connect it to. I'm pretty sure that it may be IMPOSSIBLE to avoid noise from my internals. So wanted to ask: How could I reduce the noise ? Should I connect it in the front jack or the back jack? Is it possible that because my headphones is open back - it'll leak sound into it ? Any tips in general is also very welcome! Thanks guys! Happy weekend :u (or whats left of it). and for the U.S. residents , stay safe in that storm...x3
- 5 replies
-
- mic
- microphone
-
(and 7 more)
Tagged with:
-
Whats the best pair of headphones to pair with the modmic 4 for pc gaming and im thinking of using the uni directional mic my budget is $300
- 4 replies
-
- gaming
- headphones
-
(and 3 more)
Tagged with:
-
Hey guys, so I purchased a modmic to go with my ATH M50X headphones, and i have to say it hasnt been pleasant. Firstly, when i plugged the cable into my PC, it was giving a lot of static. I quickly found that the best fix for that was to purchase a USB soundcard and that did quickly fix the static, however now I have what sounds like a helicopter flying in the distance every now and then and my friends and I are quite fed up with it. I live in Canada and bought the modmic for around $75 so its not really making me happy right now. So my question to you guys is; How can i fix this? Or should i just fricken return the darn thing because its not helping me whatsoever. thanks for the help.
-
I was interested in this product to slap onto my siberia v2 since the mic stopped working HOWEVER on Massdrop this little thing totals to $71 CAD after shipping, taxes and the exchange rate..... Any Canadian deals around? this is too expensive
-
Updated once again! TL;DR has been added to the bottom! Hello everyone! I own a pair of Sennheiser HD 598 and an Antlion 4.0 microphone which has given me much joy, rainbows and happiness for some time now on my desktop PC - onboard audio! This has been very satisfying, and I would say that I probably don't need anything that is better (This is just to inform you of my current standard and expectation of quality I want from my audio setup). So what's the problem...? I have exchanged my desktop for a laptop, Lenovo Y50, and to my big surprise: There was only one analogue audio port -> A combined headphone and microphone port! I have been through hell trying different splitters, software and "tips'n'tricks" with the purpose of making the combo-port behave properly. I hate it. I disgust it. I give up. So... Now I am in the search of a suitable DAC/soundcard that can love and be loved in return by the company of me and my setup. So far I came up with two options which have almost the same price: Asus Xonar U3: Bitrate: 16 bit Sample: 48hz Is a vendor/manufactuer/etc. that I trust and have never had a problem with. StarTech USB Stereo Audio Adapter bla.bla...: Bitrate: 24 bit Sample: 96hz (Almost) never heard of.... Is actually a bit cheaper. I'm not a total newbie in the field of audio, but I really want to know what you guys are thinking: Are any of these choices sensible? I was not able to find reviews for the StartTech option, and the Xonar U3 reviews were a bit disappointing. Other suggestions would be nice too: I might go as high as 100 USD for a DAC if the extra money makes a difference. Note: I live in Europe and I am not very good at soldering -> DIY from America/Canada might not be an option. Also, if you know how to "really fix" a combo-port, I would love to hear it -> The problem is, that the microphone frequently drops out and I have to re-plug them everytime I restart the PC. Thanks! EDIT : Sorry! I should probably also tell, that my audio is important for my music experience. I like a flat signature. It could be fun to have the option of EQ for boomy explosions in movies and games, but it is not a must. TL;DR : Cans: HD 598 Mic: Antlion 4.0 Suggest a USB and/or SPDIF soundcard that has seperate headphone and microphone jacks If it is better than onboard(Realtek ALC887), then I'll take it!
- 12 replies
-
So recently, my Logitech G930s broke, so I have had to use my Turtle Beach x12s which I purchased five years ago. I need help deciding what I should buy next. I use a ton of Teamspeak, Record sometimes, watch quite abit of TV on my computer, and also Game aton. I have a Budget of about $70 USD. I have found some options, but I have no idea to choose or what to go with. I want to act fast, because of Option #1. 1.) HyperX Clouds are on Sale today for $53. Amazing Deal. 2.) Blue Snowball ICE with Stand and Pop filter for $70. 3.) Superlux HD 681 with an Antlion Modmic for around $80.
-
To my surprise, the ModMic incurs quite a hefty customs charge from the Royal Mail (couldn't say the same for ParcelForce) of (for me) £12.21. So if you plan on buying a ModMic and shipping it to the U.K., remember to add this customs charge to the price when considering the purchase! What should've been £31.14 ended up costing me £43.35, can't bloody stand mail services in the U.K. sometimes... For those interested: Apparently if you ship something internationally, and the cost is too low to incur 'appropriate' VAT charges through the border, Royal Mail will slap on an additional charge (of whatever they want, as legally allowed) in order to get the package to you. Then they add on the cost of delivery since the money you pay to Antlion for S+H actually only goes to USPS. I think this is something that Antlion should make clear on their website, since I wasn't aware that there were going to be such charges when I made the payment a few weeks ago.
-
Hey guys I'm in need of some serious help. My setup is as follows: Asrock pro3 z77 + i5 3570k @ 4.2ghz MSI 7950 Twin Frozr @ 975/1500 Asus Xonar Essence STX Corsair TX650M Basically, I game with a HD 600 and an antlion modmic attached to it. This has not been a problem till now. I have been using the sound card since the start of April and have not had any problems with it till today. My problem is that whenever I play a game than puts my gpu under any sort of load at all, even League of Legends, my microphone starts making the crazzy humming and buzzing sounds that makes it sound like there is a chopper in the background. I have confirmed that the mic is not faulty by using it with the onboard realtek audio chip. Works without a problem. The humming only occurs when my gpu is under load. Mic works perfectly fine at desktop. The noise is incredibly annoying and all my friends are complaining on Skype. I've read up somewhere and have heard that this could be EMI? I have no knowledge on the subject. Also, before this happened, my house power went out and my computer shut off. Could that have damaged my sound card? I've been gaming and chatting before with the exact same setup with no problems. pic: http://imgur.com/M4nPlME
- 3 replies
-
- essence stx
- 7950
-
(and 2 more)
Tagged with:
-
NCIX: n/a Amazon: n/a Manufacturer Direct: http://www.modmic.com/collections/frontpage/products/modmic-4-0 The Modmic has always been a good idea. Now it's actually a really good product too!
-
Here is my little video review of the latest modmic