Search the Community
Showing results for tags '600t'.
-
Hi guys, I just bought 3 Cooler Master 120 mm fans to put into my case. 1 is for the rear and 2 are to be put on top of the radiator to replace the two stock fans that came with my h100i v2. The front fan is a stock 200mm fan and will stay there as an intake. My question is, how can I orient these new 3 fans (intake/exhaust) in order to maintain positive airflow for an optimal case fan setup? I have some pics down below if you guys need more visual aid and If you need more information please ask. Thanks!
-
Hello everyone, do any of you know how to remove the gloss black trim piece out of the front bezel of the corsair 600t? Any help would be greatly appreciated. Thanks in advance.
-
Hello Again, In my previous post I mention I have a Asus x99 Delux Motherboard. Which to me is very sexy in its White coating and I also have a Corsair Graphite 600T(white) Case. So together it makes a perfect combination. Orginally I was going to build with a asus x99 Rampage Vi and a Casmos case which would of been even better but too expensive anywho. my issue now is My case has a fan controller. but I don't know where entierly I plug them into.. Do I plug them straight into my motherboard? cause I cant connect them to the fans I have since they're both female connectors. My motherboard does come with a extra Fan card but what would be the order of it or how would I put this together? Case: http://www.corsair.com/en-us/special-edition-white-graphite-series-600t-mid-tower-case Motherboard: http://www.asus.com/us/Motherboards/X99DELUXE/ A picture of a cat: http://saintpigsfunfunbox.com/wp-content/uploads/2015/01/cat-fixing-computer.jpg
- 2 replies
-
- corsair graphite 600t
- asus
-
(and 7 more)
Tagged with:
-
About to pull the trigger and build my first gaming pc. Was going to start off with one Sapphire Vapor-x R9 290, and then in the future will look to adding another one for crossfire. Will be using a AS Rock Extreme6 motherboard and Corsair 600t, I've read that R9 290's can be faced with some cooling issues and so was wondering whether it would be ok or not? Thanks so much. Parts list if it helps, http://uk.pcpartpicker.com/user/CalebG97/saved/HBqrxr
-
Hello fellow LTT members, I've always been about aesthetics and making things appeal to my specific taste. I do love my computer (who doesn't) and always liked how it looked but I wanted to do more to make it "mine". So I took a few cans of spray and tape and went to town on all the mesh on the case. Now this is my first attempt at painting something other than walls so i did skip the ever so important sandpaper step (I know...if the paint goes bad i'll redo everything right), but all in all I think it came out pretty good. So what do you guys think? http://imgur.com/a/yAgLH Added new pics to show my now painter SSD and GPU shroud!
-
I was wondering which one of these coolers would look best in the Corsair 600T white edition (I've ordered it but it hasn't come yet, so maybe those who actually own the case could help me out), while being quiet and able to maintain a 4.6-4.8GHz overclock on a 2600K. Be Quiet Dark Rock Pro 2 NZXT Havik 140 Corsair H100i The main priority here is for the cooler to match my case, but I also want great temps and silent or near-silent operation. Maybe someone who owns the 600T White can tell me what they have put in their case and which cooler from this list would look best in it. I'm going for a black and white color scheme obviously (with a bit of blue due to motherboard heatsinks and LED fans)
- 15 replies
-
- cpu cooler
- 600t
-
(and 1 more)
Tagged with:
-
I want to watercool my system but not the GPU as I'm planning on upgrading to a 780 or beyond. (The reason for this is I want to watercool ASAP) I was thinking of buying these and adding one to the tube that would be the tube that goes to and from the GPU block, as well as the threaded ones for the GPU block when I get it. So from this: To This: For the whole system I was thinking: To: I'm based in the UK so part available here would be best. For the Res/Pump I was thinking of the XSPC dual bay rad + D5 pump This would be my first attempt water cooling so all advice and ideas are welcome :D
- 6 replies
-
- corsair
- watercooling
-
(and 1 more)
Tagged with:
-
This is my first build (in progress). Tomorrow, if everything goes A-Okay, my NZXT Sleeved LED (2M, White) will arrive. I'm also saving money for a graphics card and maybe a new PSU which is fully modular like the AX series from Corsair so that I can get some sleeved cables for the rig. Components: Case: Corsair 600T White Edition Motherboard: Asus Sabertooth Z77 PSU: Corsair CX750M CPU: Intel Core i7 3770K CPU Cooler: Corsair H100i Memory: Corsair Dominator Platinum 8 GB - 2133 MHz Boot Drive: Samsung SSD 840 PRO Series 128 GB Hard Drive: WD Black 1.0 TB Let's see some pictures.
-
I've tried the 600t replacement ones from corsair but they dont work because the edges are to wide. Are there any out there that actually would work like the 400R for a front intake?
-
Because every forum should have one. Mobo:Gigabyte Z77-UD3H CPU:Intel Core i5-2500k @ 4.7 GHz 1.40v RAM:8GB Gskill Ares@1600MHz GFX Card:Asus GTX460 PSU:OCZ ZT 550 HDD:Westen Digital Caviar Blue 500GB SSD: Crucial M4 64GB (boot) Other: Cooler Master Hyper 212 EVO
-
This is my rig in it's current form. My rig always changes, due to testing of new parts, upgrades etc. The specs of my rig is as follows: Intel Core I5 3750K at 4,2GHz MSI z77 Mpower Corsair Dominator Platinum 2x8GB 1600Mhz Asus GTX 980 4GB Corsair AX860i 2x Corsair Force in RAID0 2x Western Digital Black 1TB in RAID0 Watercooling specs: EK Supremacy CSQ Clean EK FC980 GTX CSQ Clean EK-D5 x-res 140 CSQ Alphacool VPP655 D5 pump Alphacool Nexxos St30 360mm Phobya Xtreme 200mm V2 Variety of EK fittings and angled fittings. Mayhems Pastel White. Mods I've done to the case / hardware: Cut out the top out of the case to make room for the 360 in the roof. Modified the radiator bracket on the 200mm to allow a better positioning. Cut a 13mm hole in the 5.25" area to route the hose in a neat way. Modified the screws from the graphics card block, so that I could mount it with the EVGA backplate. Modified the hard drive cage to mount the pump, along with a hole to route the cable from the pump. Aircooling build log! The new powerhouse in it's new home. Included this pictures to annoying all you OCD guys. But it was the best way I could mount it in order to hide the wires in a good way. 2x Back mounted Corsair Force 120gb's My trusty EVGA gtx 680 Nearly finished. The money shot! :) Watercooling build log!
- 64 replies
-
- denned
- corsair 600t
- (and 6 more)
-
Having a little trouble choosing which case to get I'd choose the 750D but i'm worried that the front panel won't allow that much air to get sucked in. Criteria: Airflow Aesthetics - the 750D would look great with my monitor which has a brushed aluminum finish as well Radiator/Fan mounts - I plan on mounting a Corsair H110 and a Kraken G10 Window size - would love to see the inside, i'll be lighting this baby up with an NZXT Hue Controller w/ LED strips Specs i'll be using: Intel Core i7-4930K ASUS ROG Rampage IV Black Edition Seagate 4TB 64mb 7200rpm 3.5" Samsung 840 EVO 250GB 2.5" Corsair Vengeance (Dual) 16GB 2x8GB 1600 CL9 x2 = 32GB MSI GeForce GTX 780Ti Gaming 3G or maybe a just 780 i'm not sure.. Corsair H110 NZXT Kraken G10 ASUS 24x SATA Noctua NH-F12 PWM 120mm x3 Corsair AF140 Quiet Edition Single Pack LED Corsair HX650 650W 80+ Gold, Modular NXZT Hue Controller Windows 8.1 64-bit
-
After a lot of reading I came to the conclusion that the airflow in my case was negative, and that was the cause of the large amount of dust entering the case. In my 600T I had a 200mm fan at the front and 4 120mm fans on the side panel for intake, also two 120mm fans at the top and a 120mm at the back as exhausts. I decided to turn the two Corsair SP120 fans at the top around and have them as intake instead for positive air pressure inside my case, but when I put the mesh over the top of them they make a weird sort of resonating sound - like when you blow air over the top of a bottle. This also happened when I hovered my hand over them, it seems to be the air going through a small amount of space making the sound. Is there any way to stop this? I've tried lowering the rpm but the fans don't seem to change.
-
My room gets very dusty and my 600T with a mesh side panel seems to suck most of it up so the inside is full of dust. I've been looking at a few ways to stop dust getting in using filters but I don't know which method to choose. There are dust filters specifically for the Corsair 600T here: http://www.overclockers.co.uk/showproduct.php?prodid=CM-029-DF which look good and I've read some good reviews about them but they are a little pricey. I've also seen people buying vacuum filters and cutting them to size to fit the fans on the 600T which I wouldn't mind doing, but I don't know how well it would keep dust out and I don't know what sort of filter I would need. It's reached the point where every week or so I need to clean my PC out because it gets full of dust, does anyone have any ideas that would help or have had similar problems that they have fixed?
- 3 replies
-
- corsair 600t
- 600t
-
(and 4 more)
Tagged with:
-
Hey guys, I'm new to the forum and was hoping you guys could answer some questions regarding my first time water-cooling setup. I am hoping to get rid of my Corsair H60 closed-loop water cooler and outdated rig so that I can build a new custom loop (CPU + GPU) rig, however having no experience with water-cooling this can be a bit tricky. I haven't even got any of the parts yet (apart from the case) however I will list them below. PC Specs Case: Corsair 600T SE White CPU: Intel i5 4670K Motherboard: Asus Z87 Sabertooth GPU: MSI GeForce GTX 780 RAM: Corsair Memory Vengeance LP Arctic White 8GB PSU: Corsair TX650 Watercooling Parts CPU Waterblock: EK-Supremacy - Acetal GPU Waterblock: EK-FC Titan SC GTX - Acetal Pump/Reservoir: EK-BAY DCP 2.2 Combo Unit Radiators: Phobya Xtreme 200 / XSPC EX240 Coolant: Clear EK Coolant Tubing: Masterkleer 13/10mm (3/8"ID) I was hoping you guys could shed light on a few questions I need answering: Will the 240 radiator be able to fit in the 600T? Is the pump/res combo powerful enough? (trying to save space) What would be the best way to drain this system? Should I change the tubing size? Another issue I had was fittings, again, I will list below what I think is correct. 6 x Phobya 13/10mm G1/4 compression fitting (Reservoir/240mm Rad/GPU) 2 x Phobya 13/10mm G1/4 compression fitting 90° (CPU Waterblock) 2 x Phobya 13/10mm G1/4 compression fittings 45° (200mm Rad) Here is a picture of what I hope the loop will look like: Thanks a lot!
- 6 replies
-
- watercooling
- phobya
-
(and 5 more)
Tagged with:
-
Does anyone else love their 600T and wished Corsair would rehash it ? Or make another version of it. IE: Maybe a full size version, or a micro styled one.
-
Edit: New pictures here (Changed the reservoir just for looks) My Corsair H80 pump started rattling a while back and I got a replacement. Now the replacement started rattling again. Whats the solution, ..... As Linus says, Guetto Mod it. Without further ado here it is. First I removed the pump from the cpu block, to better the water flow. (I left the base part of the pump, so it would not leak) Used a Dc-Lt pump with the alphacool Top Plexi, connected to a reservoir. Then ran the tubes to the original locations. Tubes used were Koolance ID 6.4 mm (1/4), OD 9.5 mm (3/8) Sorry for the crappy pictures, took them with my cellphone directly to photobucket. Hope you like it.
-
So as some of you may have seen I am getting ready to do a build and I was originally going to use the H100/H100i from Corsair. But I've been thinking about custom loops a lot. I managed to stumble across this kit and was wondering how good it is and what else I would need to buy to water cool my GPU as well (might be getting a 280x or a 290/290x non-ref when those come out). I know I am going to need a GPU block and tubing and probably some fittings if I plan on doing that. I know I would have to modify the top of the 600T so as to allow for a 3rd fan mount. That is as simple as taking a dremel and cutting a little bit. I am currently torn between a black/red scheme and will go with the black/grey version of the 600T, or I might do a White/Red theme and go with the white 600T. I'll also be getting a custom full acrylic side panel from mnpc tech to show off the nice internals. Anyhow thoughts and considerations?
-
Dear Community, I'm currently starting on a new project for a friend. My friends name is Jonny, he's been though tough times and we've been friends for a very long time. His family doesn't have much money, currently living on social security from his passed father and their mothers small income. I've been with him and still great friends even though these tough times, now I want to do something for him. Jonny is currently running a very crappy computer, crashing out of games roughly every 20-40 minutes. Currently he runs a old old AMD Quad core which two cores are dead / no longer functional, 4 Gigabytes of Ram, 500 Gigabyte of Hard drive and two Nvidia 8900's. I'm currently phasing out of some of my old hardware and want to put this gear into my build for him. I want to build this system using his favorite colors and setup he's dreamed of. Currently I'll be using a Corsair 600T for the build which will be painted orange with black accents, Sandy Bridge Asus Motherboard, 16gb Vengeance Ram, 1tb Wd Black, 2600k Core I7, Zalman Water Cooler, Nvidia GTX 770 along with Windows 8.1. I need help on this rig, I'm building this rig for him since he's lived a horrible life and I want to help him now . Please give me any advise you want to give, I'm completely open on suggestions, also pictures will start coming in very soon of the case modding. - Please note : These parts to put in the new rig may change over time and I'm investing personal money into this rig for him. Jonny's Color Scheme - Orange and Blue - Please Note (edit) : I know their is a lot of people who have worse and the same condition as my friend, however I've been through his times with him and wish to give back. - Parts Core I7 2600k Corsair Vengence 16gb or Crucial 8gb [crucial done] Gigabyte GTX770 Asus P8p67 Deluxe [done] Zalman 315 Water Cooler [done] Corsair GS 600watt WD Black 1tb Windows 8.1 64 bit Corsair 600t [done]
-
Hi (: i'll get me a new case and wanted to ask if you guys had any suggestions. cases i really like is the bitfenix ronin and the corsair 600t for example. they should be around 100€ and a sleek look as well as nice cable managing options everything you would want to have basically :-) greetings from germany
-
My 600T used to be the Silver Edition, but the color was starting to get pretty boring. I decided that it was time for a fresh coat of paint. Since I'm a big Ferrari fan, I wanted to do give the case a Ferrari 'tint'. My favorite Ferrari color is called "Abu Dhabi Blue", so I wanted to paint the case in that very color. Here's what the color looks like on an actual 458: After searching numerous DIY stores for a few weeks, I managed to find a metallic blue that looked very simular, and I painted the case. Here are the results: (Sorry for the mess :wacko: ) This was my first time ever 'modding' case, but I think it turned out pretty good What do you guys think?
-
Hi everyone Here is my little story. I had a gaming PC with the next specs: Corsair 600t white Asus p8z77-v intel 3570k 8Gb of Corsair memory 256Gb Samsung 830 SSD 4 HDDs (1,5 + 2 +3 +3) Asus 7970 Direct CUII Top Creative Platinum X-Fi Fatal1ty 64mb and Corsair AX750 power supply Pretty much a standard gaming PC But one day I found a bundle of water cooling components on ebay and I've decided to do a water cooling setup. It was an XSPC dual bay D5 pump with reservoir, Alphacool NexXxoS ST30 360 mm radiator (as I thought), 3 Noctua NF-P12 fans and 2 Typhoon 1450 fans. Everything's for £105 pounds. Good isn't it? But a seller have sent to me an UT60 radiator and here is my "problems"/journey began =) I've ordered: Phobya 200 mm radiator White Primoflex tubing Alphacool fittings and Koolance Quick Disconnects XSPC Raystorm water-block EK 7970 DCII water-block (I need to say it's a very rare item) a week later there was a sale of Asus 7970's so I've decided to get a second card for £227 Here is my beauty But the temps have risen up to 95c ... I needed a second water-block asap. I bought NexXxoS ST30 240 mm as well. It took 2 more weeks before I got all the components What a nice gift from Aquatuning, those little jelly gums in front =)
- 99 replies
-
Apollo refreshed Sabertooth Z77 Corsair 600T I5 3570K @ 4.5Ghz Evga 780 SC 3GB 8GB Corsair vengeance @ 1866 Kingston hyperX 3k SSD 120GB seagate barracuda 7200RPM 1TB Watercooling EK supremacy block EK 780 ti block EK 140 x-rex d5 Hardware labs Black ice GT 360 Alpha cool 240 Bitspower fittings Primochill advanced LRT XSPC water temp thing Mayhem pastel ice white All the fans and sleeved cabels are Bitfenix.
-
Hello boys and girls I want to watercool my I5 3570K. my MB is a Sabertooth z77 and it is mounted in a Corsair 600T case. here is my list of components. 1 X http://www.caseking.de/shop/catalog/Watercooling/Radiators/All-Radiators/Hardware-Labs-Black-ICE-Radiator-GT-Stealth-240-black::4287.html?from=cart 1X http://www.caseking.de/shop/catalog/Watercooling/Accessories/Bitspower-24-PIN-ATX-Ueberbrueckungsstecker::10568.html?from=cart 6X http://www.caseking.de/shop/catalog/Watercooling/Fittings/Connectors/Colored-Connectors/Bitspower-Anschluss-1-4-Zoll-auf-16-10mm-matt-black::13794.html?from=cart 1X http://www.caseking.de/shop/catalog/Watercooling/CPU-Watercoolers/Thermal-Grease/Arctic-MX-4-Waermeleitpaste-4g::16354.html?from=cart 2X http://www.caseking.de/shop/catalog/Fans/120mm-Fans/BitFenix-Spectre-PRO-120mm-Luefter-weiss::19409.html?from=cart 1X http://www.caseking.de/shop/catalog/Watercooling/CPU-Watercoolers/Socket-775/EK-Water-Blocks-EK-Supremacy-Acetal::19535.html?from=cart 1X http://www.caseking.de/shop/catalog/Watercooling/Reservoirs/All-Reservoirs/EK-Water-Blocks-EK-BAY-DCP-22-Combo-Unit-inkl-Pumpe::21225.html?from=cart 1X http://www.caseking.de/shop/catalog/Watercooling/Coolants/Additives/All-Coolants/XSPC-EC6-Coolant-1-Liter-klar::21316.html?from=cart 2X http://www.caseking.de/shop/catalog/Watercooling/Tubes/All-Tubes/PrimoChill-PrimoFlex-Advanced-LRT-Schlauch-16-10-mm-weiss-1m::22813.html?from=cart will this be a god choice? the rad will be placed in the top of the case. thats why it needs to be thin. you are welcome to come with suggestions to how i can make it better. I am very sorry for the German links it is the only place in europe where they have everything. best regards Jakob Denmark