Search the Community
Showing results for tags 'vesa'.
-
As the title says I'm looking for a new monitor to finally replace my Samsung BX2450. I'm looking for something in the 350€ to 500€ range where as always a lower price will always be appreciated. 500€ is my absolute maximum I'm willing to spend on this upgrade. Specs should be: either 1080p or 4k (adding my question if it's possible to use a 4k display as a 1080p one theoretically) 27 to 28 inch diagonal size Response time <5ms 60Hz VESA mount compatibility to turn it 90° TN or IPS depending on the quality of the TN panel Amazon links are appreciated and other suggestions ofc too!
-
- new monitor
- vesa
-
(and 3 more)
Tagged with:
-
Hi guys, I'm looking for a cheapo monitor, preferably 1080p. It needs to be IPS due to the viewing angles and it must have a VESA mount on it. I'm only looking to spend about £100, ideally less than that though. Got any suggestions? *Note: I'm in the UK Thanks in advance!
-
Hello everyone, I posted this a while ago, but I want to see if there were any new opinions. I need some help figuring out how to get a VESA mounting adapter printed for my AOC i2367f. I've found the following websites that print as a service. However, I am not familiar with the market price of printing nor the reputability of these services. Any recommendations or direction would be much appreciated. 1. https://www.shapeways.com 2. http://i.materialise.com 3. http://www.sculpteo.com/en/ 4. http://cubify.com VESA adapter: http://www.thingiver...om/thing:408247 Thank you for viewing! Regards, Joe Huenecke
- 1 reply
-
- vesa
- vesa adapter
-
(and 5 more)
Tagged with:
-
I've been trying to find a new monitor for my set up for a while now and just do not know what kind to get. I mostly play games (Titanfall, watch dogs, and League just name some of my favorites right now). Any other time I'll just be streaming youtube or watching my favorite downloaded show. My price range is right at 350$(USD). I don't know if i would want an Ips panel for the better colors and angles or a high refresh rate monitor to help me in League. I would like to get a higher then 1080p Ips panel, but I'm fairly certain that they are out of my price range. My only dead set requirement is that it has to have a vesa mount. Any help would be awesome Here is the three i was mainly looking at benq 1440p ips, asus 1080p ips, asus 1080p 144hz If it helps any I have a gtx 770 4gb card from Evga.
-
Hey guys, i'm on the hunt for a 21:9 monitor for Christmas. I just need a little help finding one. I would like to see the following features Resolution: 2560*1440 or 2560*1080 size: 27"+ Vesa mount is a must 99% RGB IPS display. Also if it was around $400 USD that would be nice. any suggestions?
-
I am in the market for a desk Vesa mount arm for my 24 monitor(some will get a 27") and wanted to know which ones are the best ones on the market Should add I am in the UK
-
I'm giving up on trying for my 27" triple monitor setup. The only 27" monitor with slim enough bezel to not affect gaming, VESA mountability, and 1440 for high resolution was the ROG Swift $799 x 3 = $2,397. (1080p looks horrid on any monitor over 24"). So, after giving up on that pipe dream, i'm looking for the same type of setup in 23"-24" monitors. I'm looking for slim to no bezel monitors with VESA compatibility. That's really the thing i'm interested in the most. I'm want to pay around $299, but if it's a good enough monitor i will go up to $399 - $449. I do not want to go with a TN panel due to having to look straight at it; that would make it very bad for surround gaming. If it matters, i'm looking to mount them with arm mounts for much better utility. Thanks guys, ~Shark
-
hi there my friend of the interweb! i was just looking at some multi monitor setups id fancy a one. could you guys recommend any cheap monitors with a VESA mount, and also a monitor stand. triple or double setups are appeciated. THANKS!
-
I'm looking for a triple monitor stand that supports two 27" monitors and a 24" monitor. I've found a few stands but none of them support the weight of my monitors: Asus PB278Q - 8.8kg Asus VE278Q - 6.5kg Asus VE247H - 4.4kg The PB278Q would be my main monitor and I don't mind which side the other monitors go. Does anyone know of a stand that will support them when buying in the UK?
- 7 replies
-
- triple monitor stand
- monitor stand
-
(and 4 more)
Tagged with:
-
Hello. Can someone suggest a vesa stand compatible with three BenQ 27" monitors? I would prefer curved and something that does not require drilling holes. These are going on an Ikea Gallant. This is from the online manual: The back of your LCD monitor has a VESA standard mount with 100mm pattern, allowing the installation of a wall mount bracket. The maximum dimensions of the VESA mounting bracket compatible with your monitor are 125mm x 125mm.
-
I currently have a 24" samsung TN panel LED monitor. Don't get me wrong its a great monitor, however a face quite a big problem with it. I have it set on my desk relatively high up, and being a TN panel the viewing angles are terrible. Samsung try to compensate this with a feature called magic angle, but I find that this sort of washes the colours out a bit, and is not the best solution in my opinion So, now I ask the LTT community to help me find an affordable monitor. I would like it to be ~24" 1080p 60Hz refresh rate Have an IPS (oe) Panel, basically a panel type with great viewing angles Tilt, swivel pivot etc. OR Vesa mounting My budget is about £150 but I am willing to go a bit over. Let me know if this price range is way too low. *edit* Sorry forgot to mention i'm in the UK
-
Before I made the upgrade to my 24" BenQ I had two Samsung SyncMaster 940BW, after that I felt I could use them as side monitors. Problem was I couldn't just undo the screws and turn the screen on to the mount due to these metal mounts. As you can see there is hole for screws there. 75mm Vesa mount if I remember right. Bam! Take them off! And just made hole in the plastic and find some screws to fit it! Final result with them on the desk! Everything is just right on! It's not a huge mod in any ways. But it made a huge difference at least for me!
-
Hey Guys, I'm looking for a VESA wall mount for my Asus VS248 24" monitor. I'm looking for three dimensional movement including extending and retracting arms. I've came across this and it seems to suit my needs but can get a little pricey and I'm not sure what the best options to choose are. Thanks (PS, how do I format the link so its just one word that links to the link? ty Elite)
-
Hey guys. I was wondering if you can help me find an individually height adjustable dual monitor vesa stand. My monitors are different sizes so I wanted to find some that could be adjusted individually. I live in Canada and prices would be nice. One of my monitors is 75x75 vesa, while the other one is 100x100 vesa. If not, could you lead me to some nice budget stands? Also, as a final option, how would two single monitor stands look? Too messy or doable? Thanks in advance.
-
Hello all! So I'm working on a project to add VESA mounts to my monitors (Using some acrylic), and I'm looking for stands. I saw the review of the Ergotech (I think was the brand) monitor stand that Linus posted. It looks nice, but it's 200 dollars! Besides seeing the stands, would three, one monitor arms work just as well? I can get three stands, that have all of the same benefits, from something like this, http://www.monoprice.com/Product?c_id=109&cp_id=10828&cs_id=1082808&p_id=6421&seq=1&format=2 All for like 75 dollars. What would the benefits be of getting one stand with three (and is there a cheaper option?), vs, getting three stands with one arm (Any suggestions on a best buy?) Thanks all
-
What are good single monitor arms that isn't overpriced, but also is of decent quality?
-
Intro Welcome to my dual review of the LG 34um95 and the Ergotron MX Desk Mount, two items that I believe go hand in hand with each other. I apologise in advanced for the subpar photos, all I had was my phone. There's a fair few photos as well. so... [WARNING] LOTS OF PHOTOS Package Contents Inside the Box you will get: Monitor Stand Power Brick Power Cable Cable Management hook thing HDMI Cable DisplayPort Cable 2 Screws for the stand VESA mount protective Sticker The usual paper stuff The monitor is packaged in hard foam, which may be alright for small objects like an ITX Case but not for a large monitor. It didn't really concern me too much though since I picked it up from a store, but it's one of the reasons why I didn't order it from the USA. Setting up You don't need any instructions in order to attach the LG stand, you just match up the holes and screw the 2 bolts in. Personally I wish they had used hex screws over the Philips head screws, mainly because it's easier to tighten and you won't round them as easily. But that's just me. When attaching the base to the monitor, you get 2 height choices. I went with the lower one because of the "max height with stand" measurement on the LG site was a little too much to fit in my desk. (I have a desk with a shelf above it) Things to do when the monitor's connected: 1. Enable DisplayPort 1.2 2. Turn down brightness to 0-5 (it's still fairly bright) 3. Adjust the contrast 4. Fiddle with the Ratio (for full screen programs not running at native resolution) 5. Mute speakers and disable them in windows playback devices (up to you though) Note: You might need an image or 2 for reference when adjusting the picture quality. Build Quality and Materials The back of the monitor is plastic that is made to look like aluminium, which is good idea because aluminium and oily finders don't mix, and it would probably add too much weight making it harder to shop for a VESA arm mount. The shiny silver around the rim of the monitor is also (painted?) plastic I believe. Let's hope it doesn't chip off like on some of the Samsung phones such as my Galaxy Note 2. The stand base on the other hand is made of aluminium and has a really thick acrylic for the neck. It gives off a real good Apple look to it. I guess after saying all this, the monitor does give off a cheap-ish sort of feeling to it. And with Massdrop selling it for $800 USD in July (34um94, same thing though) and it being sold for $1299 everywhere else, they must be making bank on this monitor. Although I'm unsure of how much money went into R&D, seeing how they didn't just stick 2 panels together, and it runs at a non-standard resolution, I'm sure they spent a fair bit. Back Panel and I/O The I/O that the 34um95 offers are: Power DC in HDMI x2 Headphones out Displayport 2.1 Thunderbolt 2.0 x2 (1 for daisy chaining) USB 3.0 type B in USB 3.0 type A out USB 2.0 type A out x2 Kensington lock I believe the USB ports are a complete waste, the difficulty of reaching behind your monitor to plug something in is too much, even if you have a VESA mount that allows it to swivel. You're better off buying a USB dock to sit on your desk for much easier access. They didn't really need to include HDMI either, or the headphone out.... or even the built in speakers. Cutting those things out and selling it at $999 AUD or $899 USD would have been a lot better. If you're going to use this monitor make sure to use the DisplayPort or the Thunderbolt ports on both monitor and GPU to get the full 3440x1440 @60hz. The current specification of the HDMI port won't run this resolution at 60hz. Size and Resolution With the 34um95 being the equivalent to an extended 27" 1440p monitor, I believe it has an advantage over <30" 4k monitors. The LG's DPI sits at about 109. Compare that to a 96 DPI on your average 23" 1080p monitor and you'll get a 12% size reduction when moving a window over from the 23" to the LG. If I had a 28" 4K monitor instead, (with 147 DPI) a window would look 35% smaller if I dragged it across from the 23" monitor. You have to take these things in to consideration because of Windows' crappy GUI scaling. I'm sure Microsoft knows about this and hopefully we see good support for higher DPI monitors in Windows 9. Colour and Display Performance I can't say too much on the colour reproduction for a few reasons. 1. I don't have any devices that can test the colour accuracy 2. I don't have an example of what the true image is supposed to look like (so I can't compare) The contrast of the display shows extremely bright whites when on a word document and completely dark blacks around a YouTube video. My TN panel looks like it's greyed out compared to it. What else can I say... It's an IPS monitor so viewing angles are great. If you want a detailed description of the colour accuracy and all that, there are a few sites that explain how this monitor performs, so I suggest you have a look at them. The responsiveness and input lag of the monitor is surprisingly good for something of this size. I thought it would be somewhat laggy like my TV is (even on game mode). Stand and VESA Arm Mount Because of the limited functionality of the stand (no pivot, height adjust, depth adjust), I ordered a VESA arm mount. The 'MX Desk Mount LCD Arm' by Ergotron to be exact. The arm is said to made for the heavier all-in-one computers such as the 27" iMac, and is made of a polished aluminium. The basic specifications for the arm are: LCD Size: ≤ 30" Capacity: 14-30lbs or 6.3kg-13.6kg Lift: 5" or 13cm Tilt: 80°† Pan: 360° Rotation: 90° Yeah, it says it supports 30" monitors or smaller, but the reason why I still bought it was because the LG monitor weighs less than 7kg without its stand and there was a review on Amazon from a person who is using it with their 34um95. They said the arm was really robust and it was worth getting. And if it's supposed to hold up heavy all-in-ones then it should at least be able to not flex when holding up this monitor. Ergotron MX Desk Mount (techtips) Before attaching the VESA stand to the monitor, I put the included VESA sticker over the mounting holes on the monitor to protect the plastic (not that it matters). Next, I bolted Arnold Schwarzenegger's terminator arm to the monitor. Note: The desk mounting pieces is made of fairly thick steel. I highly recommend you have someone else to help you when attaching the arm to the desk. This is because the arm is spring loaded so when there is no pressure applied to it, it will stretch out fully. However, if you're lonely, you can counter this with some reasonably strong string and wrap it around the desk mount and the VESA mounting places. Once installed you can adjust your monitors position how you like. What's amazing is that I can fully extend the arm and have the monitor come completely out of the desk. (makes it awesome for cleaning) Note: In the picture below it isn't 100% extended. Aesthetically, this is what you see on your desk once it is mounted. It looks really clean and takes up much less space than the original stand. Monitor Functions One thing I hate is having physical buttons on a monitor, back in the day of having a CRT monitor the on/off button would click but not turn on if I didn't push it hard enough. For some reason that scarred me for life and thus why I have always made sure my monitors had touch sensitive on/off and menu buttons. BUT, with LG's joystick controller, I think I'll make an exception. With using the joystick to navigate through the monitors display menu, I've found that it blows away any monitor that had those multiple button, single function layout. In fact, my 40" 6000 series Samsung TV has a similar joystick navigation setup, but I don't use it since I have a remote. Wallpapers If you're looking for images for your monitor's wallpaper you will only find a handful of images at the 3440x1440 resolution. Here is what I suggest you do: Search for 4K images (3840x2160) and crop and resize to the native resolution. and/or Search for images > 4MP or >6MP, go to advanced search (gear icon) and change the aspect ratio to Panoramic. From there you crop and resize the image to suit your monitor. The best and quickest method to cropping and resizing images (by far) is the Microsoft Office Picture Manager. So right click your image and open with Microsoft Office Picture Manager, then click the 'edit pictures...' button and you're on your way. For those who will be having multiple monitors (especially running at different resolutions), I highly recommend you use DisplayFusion. It does cost money (I bought mine off steam for $10), but it's really worth it. Problems I've noticed that there is no 'standby' option, and that there is only an 'off' function. This off function is similar to unplugging the DisplayPort cord from my GPU. So when I turn the monitor off the #2 monitor becomes the main monitor and so the desktop icons and open applications shift over. Turning it back on makes the LG monitor the main monitor, and thus shifts the desktop icons back to how they were. BUT, the open applications still remain on the #2 monitor. I'm not sure if this is a problem with the LG monitor or the DisplayPort interface but the GPU must be detecting that there is no screen when it is turned off, so it reallocates the main monitor. Compare this to my other monitor, where if I turn the screen off, the GPU still detects that it's there so it still sends the image to the monitor despite the monitor not showing the image. Click the link below to see what I mean. http://vid708.photobucket.com/albums/ww87/hoppa33/LG%2034um95/VID_20140818_055908.mp4 Conclusion Overall, the 34um95 is a pretty awesome monitor. You can view so much more than you could before on a 1080p monitor. And using programs such as 3dsmax, Photoshop and Aftereffects becomes a lot better to work with. The Ergotron MX Desk Mount is an extremely robust, manoeuvrable stand that shows no signs of flexing because of it's solid aluminium construction and its solid joint connections. For those who are interested in this type of monitor, I believe Dell and AOC will be releasing similar 3440x1440 monitors, so I'd look out for those. (They might be cheaper) I'd call this monitor the 'best of the best' if it had a curved screen, support for g-sync/ freesync, and was at a cheaper price. And with competitors releasing similar monitors I suggest to wait and see what they have to offer. (nothing else out at the time of posting this) Thanks! Thanks for reading my review on the LG 34um95 and the Ergotron MX Desk Mount. Feel free to post any questions you have about the product and I'll try to answer them to the best of my ability.
-
Hey everyone, I hope this topic wasn't created before and if it was, I apologize for duplicate topics/repetition. Anyways, my topic is about getting 3 monitors. All of them being identical. Preferably with thinner bezels. I don't do anything serious such as photoshop or anything. But programming and minor website design. Biggest thing I do is movie watching so I would prefer 1080P. 4k isn't something I would want for a while. One thing I need for sure is for them to be vesa mountable. Something that Linus has: https://twitter.com/LinusTech/status/482372941183606785?utm_source=fb&utm_medium=fb&utm_campaign=LinusTech&utm_content=482372941183606785 So yea... Budget friendly... Vesa mountable... Thin bezels.. 1080p... I know I'm asking alot and I'm writing this 1:00 in the morning. Any advice if you understood what I'm saying? Thanks!
-
VESA, the people behind that made sure your video output signal is going to work , ,with the display you're using, is at it again, and is now creating a new group, to set a standards for AR and VR. As of now there are no standards to it, and having a bunch of different ar and vr devices from different vendors, is driving up cost, as well as compatibility issues for the consumer. With a standard set in place, then it should solve current compatibility issues and make it a more positive experience for everyone. said Greg Stewart, director of system architecture at Analogix Semiconductor and chair of the AR/VR SIG. https://videocardz.com/press-release/vesa-forms-special-interest-group-focused-on-augmented-and-virtual-reality-markets