Search the Community
Showing results for tags 'usb3.0'.
-
One of my usb 3.0 headers has a bent pin. The pin is close to another one and being the paranoid that I am, I worry about the pin being close to the other one. Will it cause problems? It isn’t touching the other one, and I don’t want to go though the hassle of removing the gpu and its brace and the front fans just to straighten it out.
-
Good Morning All! I have an issue with a USB 3.0 where im trying to replace a USB-A 3.0 head with a USB-C 3.0 head. Ive soldered some flying leads onto a USB-C 3.0 socket PCB and then connected these leads to the USB-A cable (where i cut one of the heads off) Using a multimeter i can see there is continuity between all the pinouts correctly. However, when im plugging this cable into a PC and a device. The device is only being recognised as USB 2.0 instead of the USB 3.0 (which the device is definitely a USB3.0 device as i have plugged in a USB-A to USB-C cable and all is working correctly) Im wondering if anyone has an experience or notes on custom making USB 3.0 cables. Im 100% sure i have the Tx+/Tx- and Rx+/Rx- connected correctly. I had no idea that USB 3.0 was so complex to get working compared to USB 2.0 where you can just put any connector on and it works!! Thanks for any advice guys ! -K
-
Hi guys, is there a performance difference if i plug my mouse and keyboard to my front io and not rear io? my rear io is far from my desk and to use rear io usb ports i need a usb cable extension. what is the best way to use my mouse and keyboard? plug it into my front IO (usb 2.0) or use my rear io (3.0) + usb extension. if there is not noticeable difference i will just plug it into my front IO so i dont need to buy a usb extension port
-
i'm looking to get a USB 3.0 expansion card to put into a PCIE 2.0 8x wired 4x slot. what should i be looking at in terms of bottlenecking and speed? motherboard is a dell 09kpnv in a precision t3500
-
while managing my cables for my terrible case i unplugged and attempted to plug my front IO USB 3.2 connector, while doing this i broke the pin in the very top right corner. I dont know if the image attached it applicable to me but if it is, i broke the 'ID' pin. The pin completely fell off and i just thought id plug it back in without the pin and it seems to be working, i mainly use my from usb ports for stuff like my xbox controller but if i wanted to use it for usb storage would it still function correctly?
-
I'm trying to find the USB 3, 20-pin standard socket and plug on digikey, mouser, or anywhere else for that matter. I'm creating a PCB. What's the standard called for this connector type? Any direction would be greatly appreciated. I think I'm on the right path for the socket which I need to be THT, but I'm really having trouble finding the plug with the key. I'd prefer the plug to be crimp terminals for simplicity purposes with a diy harness assembly, but could go ribbon cable assembly if that's the only option. Promising sockets I've found so far are the 98414-G06-20ULF or LTMM-110-02-L-D. Really just need a mate to the socket connectors at this point.
-
See my usb 3.0 cable was stuck in the socket and I pulled the cap off the cable it’s self (it shows the whole pin) and it also pulled off the plastic border for the usb cable from the motherboard. Does this mean that MB is dead? specs CPU R7 3700x MB Asus B550-A CPU Cooler NZXT x53 RAM GSkill Neo 16gb PSU 1000W RMx Corsair GPU (Coming Soon) 3080 Msi Ventus
-
So I have a gaming laptop which is always plugged in and enjoy using my wireless mouse to wake it up without having to touch it. The problem I have is I also have a laptop cooler stand under it connected via one of the USB 3.1 ports, so when my Laptop is put to sleep the fans and lights of the cooler stand are still running (fan noises ). I'm not trying to be lazzy or anything it's just I've injured my leg making it hard to move about so being able to do everything hands off would be great. (Just editing cause I have many views but no one offering advice would help a lot please if someone could help get this to work it would really help set my mind away from my leg because I'm tired of being stuck in bed the last week and I'm still struggling to use crutches got a month or so until I start walking again) (So my question is it it possible to somehow have the port the cooler stand is connected too to stop powering the device while still being able to wake my Laptop using the wireless mouse.)
- 2 replies
-
- usb3.0
- powersettings
-
(and 3 more)
Tagged with:
-
I’ve been helping my stepdad set up a laptop dock in his home office for WFH. His laptop is slightly older - a Lenovo Flex 5-1470 - but it does have one USB-C 3.0 port. He bought two 1080p monitors that use HDMI, and a cheap USB-C dock from Best Buy. The dock would only allow one monitor to display at once, and when he called the support number for the dock, they told him that the dock he had (which supported up to USB 3.1 gen 1) supported simultaneous HDMI and DisplayPort output but not simultaneous HDMI, and that he just needed to buy one of their more expensive docks. I’m understandably suspicious of that claim. I’ve been looking online to see if USB 3.0 has support for multiple displays over a single connection, and haven’t been able to find any information other than “you can convert USB-C to HDMI” Is it possible to connect multiple displays to a single USB 3.0 connector? Keep in mind this is 3.0, not either generation of 3.1, and both displays are 1080p.
-
Hey guys, So I am building a desk pc and long story short I need 2 3.0 internal headers, I have tried looking for adapters for 3.0 headers that go from one to two but I have not found anything, but I have found 2.0 headers to 3.0 headers what are the cons? Will I loose speed and how much?
-
I have bought two HDMI 3m extensions and 2 USB 3.0 3m extensions just for only one HDMI cable to work. So i need help from someone who knows a 3m USB extension that has been PROVEN to work with the lenovo explorer. My USB cables are up to spec but whenever i plug them in i get a notification saying ''usb device not recognised'' and mixed reality portal gives me error 7-14. I have tried everything i could to get the cable to be recognised so the problem must be the cable itself. So someone who knows a 3m USB cable that works, please show me. Thanks.
-
- lenovo
- lenovo explorer
-
(and 4 more)
Tagged with:
-
I have a weird problem and I'm not entirely sure what to do. Recently I switched to the X570 platform with a RYZEN 5 3600X on an MSI MPG X570 Gaming Edge WiFi motherboard, and shortly after that I swapped the system from a Silverstone RL06 to an NZXT H700. The computer works fine, except every so often I get the "USB Controller does not have enough resources" warning message. Now, whenever I plug certain things in they just don't work. Specifically, I have a Samsung BAR 32 GB flash drive, an Xbox 360 Wireless Receiver and an Xbox One Wireless Receiver that just don't work when I plug them in to any of my USB ports, whether they're on the motherboard or the front panel. Windows doesn't show them, I don't get the connection sound, nothing. Running Windows 10 Pro on the latest update. I started experiencing this problem a few days before the error message showed up, and the error message doesn't pop up very consistently at all. I've tried reinstalling the drivers, reinstalling Windows via Fresh Start, troubleshooting through Windows, unplugging other devices, among other things. Any help with this issue would be greatly appreciated.
-
Hi everyone! I bought an used Asus p8p67 evo b3 for my brother's pc, with faulty internal (the usb case connectors) and external usb2.0 ports (the 3.0 ones work) for 20 usd. The error i receive is this "The last USB device you connected to this computer has malfunctioned and windows doesn't recognize it" The thing is, every other thing works, overclocks are stable (over 24hs of prime with small ffts), temperatures in the mobo and VRMs are normal, BIOS works as intended, there are no bent pins, and so forth. The seller said to me that he thinks that the "chip that controlls the usb 2.0 ports is faulty, as the 3.0 ports work as intended". He said to me that i could disable those ports and get away with a cheap PCI USB 2.0/3.0 card. I really don't know where the problem can be, but any help would be appreciated.
-
Hi Everyone, So I bought a TUrbo-X ZUB-XPSSD HDD / SSD docking station today. This little beast can contain 2 pcs of 2.5" HDDs, and has hotswap functionality. Pretty neat. I was so excited about it that one tiny fact slipped my attention: To be able to use it, I would need a 19-pin connection on the motherboard. Given the fact that I have a laptop, I don't have that available. The only cable they included is a female 19-pin connector, which "comes out of the box", literally speaking. My questions may sound a little silly (if not a lot): 1) Is there a legit converter for this cable? 2) If I buy a 19-pin to USB converter cable, would the thing work if I just plug it into my laptop? I have an Acer Helios 500 (Intel version). I have attached pictures which show the front and the backside of the device, and its cable. Any help would be greatly appreciated! Thanks in advance!
-
I am facing a strange issue with my Asus rog gl503vd one of the right hand side usb 3.0 port is doing some strange things, yesterday it was working fine but when I inserted my Logitech Bluetooth keyboard and mouse dongle to it, first I got a popup usb receiver installing drivers, then suddenly it stopped working, I tried my 2.0 pendrive and it is not working, same with the data cable connected to my one plus 5, but usb 3.0 thumbdrives are working properly, now I went to the authorized service center where they inserted both 2.0 and 3.0 devices and guess what? It was already working.....then I came home tried my usb 2.0 pendrive it was working, but when I inserted that Bluetooth dongle again, it stopped working..........but strange thing is it is working fine on every other usb port in my laptop.... please help!
-
Hey guys, so as the title hints - I want to install a Linux distribution on a flash drive for various reasons and I'm looking for the optimal way of doing it. However, I want some feedback on this quite popular project (does it work ok, ia it too laggy, glitchy and what kind of a flash drive should I aim for). Which distro would run the best on a thumb drive? I've used Ubuntu and Mint before but I don't mind trying others. So far I believe I would need a usb 3.0 instead of a 2.0, not only to boot faster but also to run faster and hopefully not get a lot of stuttering. Also I believe a 64gb one would be recommended if I want to install some things and increase its usebility. Am I missing something? Any special notes to take? Any other recommendations? If you got any other tips on this, please share. Thanks in advance!
-
I built a HTPC a while ago in Node 202 and the specs are: i5 6600 8GB RAM Asus B150I PRO GAMING/WIFI/AURA latest bios 2606 EVGA GTX1070 FTW 500W SF-L Silverstone power supply I moved the PC to another room so I attached a USB 3.0 hub to it for peripherals. After a few minutes I started noticing lag with keyboard and the mouse so I unplugged the keyboard from the hub and just used mouse and it worked fine. The hub was powered so I thought maybe its the hub that is faulty. I bought a new hub and the same problem. Checked with all the ports and the problem remains the same. I then found that any of the hubs cant get my Sandisk Extreme 64GB to detect but it shows the status light. Till then I had bought 6 USB hubs and all have the same problem. I have also tried hubs with 12V power but everything is the same. Is my motherboard faulty or something else? I am unable to figure out the problem. Deleted and reinstalled USB driver and all devices also didnt resolve the problem. Is it Windows 10 issue maybe? Any help would be appreciated.
-
Hello everyone, Problem: I just built a new system and I have a problem with the front connectors on my bequiet! Pure Base 600. The case has 2 front USB3.0 connectors (both run off one internal connector of course) but they behave very weird. I can use both connectors to run USB3.0 devices like my external HDD just fine (Seagate 4TB, it appears under storage controllers in the device manager and copies at the drives maximum speed), but all my USB2 devices like thumb drives and my wired xbox 360 controller only work on one front port (they show up as "Unknown USB Device (Device Descriptor Request Failed)". I am guessing this is a problem on the motherboard side since the connector itself seems to work fine with USB3.0 devices. I also don't know if there is a problem since the motherboard has two internal USB3.1 (Gen1) connectors but they should be backwards compatible? Solution Approach: The system is as fresh as it can be, all the newest drivers are installed updated the motherboards BIOS to the newest iteration updated all USB Controller Drivers through the Windows Device Manager Tried both internal USB3.1 Headers Tried uninstalling and reinstalling the USB devices drivers throught the Device Manager Windows 10 is up to date (10.0.17134 Build 17134) as of 08/31/2018 System: Windows 10 Pro 64bit bequiet! Pure Base 600 Asus PRIME Z370-A Intel Z370 So.1151 (BIOS Version 1002) 11GB MSI GeForce GTX 1080 Ti GAMING X 11G 250GB Samsung 960 Evo M.2 750 Watt be quiet! Straight Power 11 Modular 80+ Gold 16GB (2x 8192MB) Corsair Vengeance LPX schwarz DDR4-3000 Intel Core i7 8700K Corsair Hydro Series H100i v2 Does someone know what the problem could be or where I could even start to look?
-
Hi everyone, I was fixing a few of my drivers due to problems that were occurring with conflicting drivers on my windows 10 device. That was over 3 months ago and since then I have not had the ability to access/use my USB 3.0 ports. I looked back through my driver listings and there was so USB 3.0 drivers listed. I thought 'oh well I'll just roll my computer back and retrieve the drivers' but due to the time I'm not certain which roll back it will be and if I go the wrong roll back I could ruin my system so that is no longer an option. My second thought was to look on the internet for available USB 3.0 drivers and found none. I then called MSI (as I have an MSI motherboard) for assistance regarding this issue and they stated that they cannot help me, there are no USB 3.0 drivers on their website and all he could do was direct me to their drivers webpage. I thought I may just have to reset my whole computer to get the drivers back but as I'm not sure if this will return the drivers I don't want to try that. The only other thing I could think of would to be to do a complete fresh install of windows if resetting the system doesn't work. However I wanted to hear what everyone here thought would be the best way in order to get my USB 3.0 drivers back, without having to loose all my data and programs from the computer. Any help is much appreciated. -Lato
-
Today I got 250 megabit down and my https://www.trendtechcn.com/product.aspx?productid=322 usb wifi adapter says it should support it but doesn't Anyways I already made a topic about this (not spamming) just want advise. What wifi card do you have and what is your download and upload speeds. All answers would be greatly appreciated. my budget is 30-40$.
-
So I have a car head unit with a USB 2.0 Type A output. Now I have a Pixel 2 with USB 3.0 Type C. Is there a way, using something like a y cable or active extension I can have fast charging on my phone whilst being connected to my car, for android auto.
-
I have an mSATA/mPCIE port on my asrock z170m/itx-ac that used to serve for an mPCIe wifi card, but I've switched over to an USB wifi dongle that works way better. So I wanted to utilize it, and looked for an adapter with female USB 3.0 to male mPCIe. And this came out: https://www.aliexpress.com/item/Motherboard-Mini-PCI-Express-to-Dual-USB-3-0-19-pin-Expansion-Card-Adapter-PCI-E/32807392982.html?spm=2114.10010108.1000014.2.1fac2dc5JBdd7f&traffic_analysisId=recommend_3035_null_null_null&scm=1007.13338.80878.000000000000000&pvid=e8cb5c0b-936c-4dbc-8758-9eeeb217998f&tpp=1 and different variants: https://www.aliexpress.com/item/wholesale-Mini-PCI-e-PCI-Converter-Adapter-hard-drive-converter-SPCA025/1548439777.html My main purpose is to connect a new USB 3.0 wifi dongle and Sandisk Extreme USB 3.0/3.1 Linux boot drives. I don't want them sticking out of my computer, and the USB 3.0 header in my mainboard is (obviously) already used by the front IO. I don't want to sacrifice that. 1. Have any of you guys used this? Could this be worth all this research and cost? 2. And, oddly, this particular set of adapters only appear on Aliexpress-Why would that be, and are they trustable?
-
i bought these in order to make the 3 foot USB 3.0 cable That im using for PCI-E risers longer. For some reason when I plug these in the GPUs then are no longer recognized as connected. Its a USB 3.0 connector, and the wire is labeled as USB 3.0 and feels like its also shielded. Why would this not work to further the cable length for the connection? I could not find any cheap long USB 3.0 cables anywhere, and a 3 foot cable is a pretty big restriction on connecting the cards neatly.
- 3 replies
-
- pci-e risers
- usb3.0
-
(and 3 more)
Tagged with:
-
my motherboard has only one USB header and i have the asus ROG gaming panel and it uses the ONLY header on my board, a friend of mine gave me a usb3.0 to 2.0 wire adapter to use with the nzxt internal usb hub but my PC does not pick it up at all and its not really working here is the wire i got https://www.amazon.com/SIENOC-USB3-0-Female-Motherboard-Adapter/dp/B00O0HC3Y0/ref=pd_cp_147_2?_encoding=UTF8&pd_rd_i=B00O0HC3Y0&pd_rd_r=WF17DP23M2EAS2TQNH91&pd_rd_w=9xNgj&pd_rd_wg=gX5ja&psc=1&refRID=WF17DP23M2EAS2TQNH91 i connected the ROG gaming panel to the usb header on the board and have the nzxt hub connect with this wire to the usb3.0 header thanks in advance for the help! Edit - This is my motherboard - ASUS ROG Crosshair VI Hero (WI-FI AC) https://www.amazon.com/ROG-Crosshair-VI-Hero-Motherboard/dp/B072LX7WLN/ref=sr_1_1?s=electronics&ie=UTF8&qid=1516210546&sr=1-1&keywords=asus+ROG+crosshair+vi+hero+wifi
-
Hi guys! It's my first time here, I'm French and I don't have a lot of skills in English and in hardware, I just know the basic. ? So recently, I bought an acer aspire vx15 on rue du commerce ( https://m.rueducommerce.fr/produit/acer-aspire-vx-15-vx5-591g-558z-noir-29072208#moid:MO-2428AM70609592 ) with Linux installed into it ( not gnu Linux,not ubuntu... just Linux.) I installed windows 7 because my oncle is an computer scientist and he give it to me.? As you probably see, my new computer doesn't have USB 2.0 port , only USB 3.0 x3 and a type c connector but they bolth not working in win 7. I used a software which changes the ISO files for integrate usb 3 drivers and it works for the installation, but now I have my computer with win7, 4usb port which doesn't work and no wireless connection ( my wireless card need drivers for function .) I don't know what to do, please help me?? Thanks!!