Search the Community

I recently acquired a used FM2-A75IA-E53 motherboard, supposedly, pulled off a working system. When I tried turning it on for the first time there was no post, not even a display came up, and any usb peripherals I plugged in didn't seem to be getting any power. I plugged in peripherals I was sure worked, as well as monitor and display cables. At first I had installed an A4-7300 cpu, but learned that the motherboard may have needed a bios update to support that cpu. I bought an A4-5300B to update the bios, still no post or power to usb. I do want to mention that the cpu fan turns on, the cpu is heating up, and the psu turns on. I know for a fact the psu, ram, peripherals, monitor, and cables work. There is a slight buzzing I can hear in the cpu socket even without the cpu installed but I'm not sure that is the problem. Apart from all this, the only weird thing is the 24 pin connector is difficult to plug in and unplug, but I don't see anything physically wrong with it. Any help would be so greatly appreciated.

Hey guys So, I was recently super excited after beating the scalpers for once and getting myself a 5600X. I paired it with an Aorus B550 Pro AC booted up right away to my surprise and, after a little snag with windows, got it running np. I then went and updated the bios to the latest just in case and it was all good. Two days later, I try to boot up my pc, and I notice I'm not getting video and mouse and keyboard are unresponsive. The thing isn't posting at all. I take a look, and the VGA diagnostic led was staying on. I tried reseating my graphics card and, after trying to reboot a few times, it went back to working for about a week. The next time the red vga led came up, I could never get it to post again. I tried an older graphics card that I am absolutely sure is fine and the same thing happened. I tried my current graphics card on my older system, and sure enough, it's working fine. I tried reseating the ram, the cpu, nothing worked. So, I finally went and returned the mobo and it took me about 3 weeks to finally get a new one, the same b550 Pro AC, but this time a Rev 1.1 one. Well, lo and behold, I have run into the exact same behavior as previously, only this time it happened from the get go. I tried the blind q-flash plus thing to upgrade it to the newest bios, it still wouldn't post, it remained stuck n the red vga led. After trying flash the newest bios again, clearing cmos for the n-th time swapping my graphics card to every other pcie slot, I finally went back to the main x16 slot and it worked perfectly fine. For a day. This morning, I encountered the exact same behavior, and nothing seems to work anymore. What do? I am beginning to think this is an ongoing issue with Gigabyte boards since I've read of a few cases in reddit and often times no solutions, and I shudder to think it may actually be my CPU because 1) fuck trying to get a new one in the year of our lord 2021, and 2) it's past the return date with Amazon anyway. What weirds me out is that it actually did work fine, at least for a time, and I have never encountered a sporadic issue like this before. Relevant specs: Aorus B550 Pro AC rev 1.1 Ryzen 5600X Gskill ripjaws V 2x8GB RTX 2080 Would love to see if anyone else has ran into this issue and what possible solutions you found if so. Thanks in advance! Edit: I kept trying solution after solution trying to get it to post for the last couple hours. Not sure if this is the wisest of ideas, but I had to stop eventually because, despite the diagnostic led saying it can't start up the gpu, the card itself was actually starting to get quite hot, to the point where it's started to worry me. Why would the gpu heat up a whole bunch if there's supposed to be no load?

Heya, I recently build my own PC with this specs: Ryzen 5 3600 with boxed cooler 2x8GB HyperX DDR4 Memory 3200mhz MSI B450 Gaming Pro Carbon Max WiFi AMD Radeon 5700XT 50'th Anniversary 500w BeQuiet Pure Power 11 After swapping the cooler to an MSI Codeliquid 240R the Mainboard told me that my CPU is broken (red light on EZ Debug LED), and it wasn't Posting. I replaced the CPU with a new R5 3600 and the red light on CPU was gone. Unfortunately its saying that the GPU was bad now (Red light on GPU and Beep Code 1x Long 2x Short). I also tested my old GPU (Palit GTX960 4GB) and had the same error. Both GPUs are working fine on my old System (gigabyte ga-z170x-gaming 3, i7 6700k, 750w cooler master PSU). Swapped the Mainboard (replace via retailer) and had the same error again. I did a refund on the MSI B450 Board and got my hands on a B550 Aorus Elite AX V2 which got the same error again (Beep Code: 1x Long, 3x Short). Swapped out the RAM and PSU from my old System, still not Posting. I cleared CMOS several times and flashed BIOS to the newest (on all 3 Boards). I hope that one of you guys can help me out because I swapped out everything possible with no success. Will also test a friend's Ryzen 7 2700x and RTX 2070 Super tomorrow.

I was cleaning my pc yesterday I turned it back on and it did not post. It turns on spins the ramps up the fans and gpu rgb light up and starts strobing, then the fans ramp down and the gpu rgb resets colour . I recently had the same problem before. It seems to happen when the gpu is removed and reinstalled. Its like the bios gets scrambled. The last time it happened I somehow got into the bios eventually and reinstalled the bios which fixed it but unfortunately no such look this time. I have switched around the ram,reseated the gpu, reset cmos , reseated power connectors and removed the drives Any help would be appreciated Specs: Ryzen 5 1600 Asrock Ab350m motherboard 8gb x2 corsair 2400mhz ram Gtx 1080 strix Evga 600w 80+ psu

i have been finish installation windows 10 after it i do update and i turn off the pc and i take my pc with to another city when i am at home i try to plug my pc and work on it nothing works only rgb and no qled lighiting pc specs : CPU : AMD R7 5800X MB : ASUS ROG STRIX B550-F RAM : AORUS GIGABYTE 16GB 2x8GB 3200 GPU : PNY XLAB RTX 3070 PSU : CM 750W GOLD FULLY MODULAR ANY SOLUTION

Hello, I have a weird problem with my PC. I can only make the PC start if I reseat the CPU. This is a recent problem. Steps: -I reseated the CPU and the PC was working perfectly fine -I did some work on it (not gaming, not using it to full specs either), just moving files here and there and opening some programs -I did a few restarts on it and a few shut downs, everything worked fine -Went outside for 10 minutes, PC turned off, plugged into the power socket with the switch off (basically no power), came back, switched the power on, started PC, CPU error Specs: CPU: Ryzen 7 2700 GPU: Gtx 1660ti OC 6GB from Gigabyte Motherboard: MSI B350M PRO VD PLUS Case: Polar Light v2 RAM: 64gb G-Skill Ripjaws 3200 dual channel PSU: Segotep SG-D600SCR, 600W SSD: Adata SU800 I tried most things on the tryout before posting here forum. Since COVID is a thing, I cannot test the parts in another PC, so I can t try that out! Some more extreme stuff I tried: -Changing GPU (though it is meaningless, since my motherboard has ez Debug LEDs pointing there is something wrong with the CPU) -Trying to turn on the PC without the CPU power connector in, thinking there must be something power related to the CPU, since reseating it makes the PC boot no problem -1 full day (24h) of rest without power plugged in and without CMOS battery. Did not work! Other data: -I use the pc for rendering, but not daily(two-four days/month for around 3-4 hours with breaks) -I did overclock the CPU from 3.2 Ghz to around 3.7 when rendering (MAX 89 degrees C on stock cooler), did not have any issues whatsoever (besides crashing first time I tried 3.8 Ghz)

Hey Guys, My Sapphire Nitro 6900xt arrived recently, DDU-ed my Nvidia drivers, popped the 6900xt in, ran some benchmarks, timespy / firestrike. Restarted, enabled SAM on my MSI X570 Tomahawk wifi, tried out a few games (everything took around 30 minutes). Went out for dinner, and when i came back just 20 minutes later, PC refused to POST, case fans/ AIO / RGB all functions, even the RGB on the 6900xt lights up, but there is no signal, cant even get to BIOS. Multiple attempts to restart, reseated GPU and ram, nothing works, just a black screen. ez debug LED on the motherboard has it light up on VGA. Swapped the 6900xt for my nvidia card, and system boots just fine. But the second the 6900xt goes in, system refuses to POST, no bios, black screen. Did i get a lemon ??? What is strange is the card ran fine for a while, have no idea whats going on. System Specs Ryzen 5900x MSI X570 Tomahawk 4x8gb GSkill Trident Z Neo 3600 Corsair Hx 850 PSU

Hello, I was helping my friend today build their computer and it wouldn't boot. I went to look at the Q-Led which was white. This indicated the graphics card(VGA) wasn't working properly. I tried both slots on the motherboard and it still didn't work. I tried different HDMI and display port cables and still nothing. I brought the graphics card home and put it in my system and it worked perfectly fine. My motherboard has a 3.0 pcie slot and theirs has a 4.0 slot. I was wondering if I overlooked the fact that a 3.0 slot card doesn't work on a 4.0 slot motherboard. I'm thinking its between the slot not being compatible with the graphics card or the motherboard is broken. The system turns on and has power but it does not post at all. Parts i5-10400F Asus b560m-A gtx 1650 oc

My pc was working just fine. All dandy. Then I put it to sleep for around an hour and when I turned it on again, it didn't post. I checked for the q code but it just keeps jumping and would not stop on any 1 qcode. My config is: 5900x Rtx 3090 FE 16gb gskill trident Corsair Rmx1000 psu asus crosshair 8 hero Mobo I have tried to use 1 ram stick at a time and still the same problem. I really don't know what else to do. I didn't OC it or anything....was just using it normally

Hey guys, So I have an ASUS Crosshair VIII x570 board, and I recently purchased a second m.2 drive to fill the other slot. It's a WD black PCIE 4.0 drive (1tb) My current m.2 drive is in the top slot and I went to install this one in the bottom slot. But when I installed it, my computer would go through a bunch of extra error codes on boot and then the post but hang on POST screen with a board code of 06. I also can't get into the bios from the POST screen as it's completely locked up. Does anyone know how to resolve this? I took the drive out and after a little longer boot time I made it to desktop....so thankfully it worked without the new drive.

I'm at a completely dead end and hoping someone can help me please? I think it's the motherboard but wanted to check Specs: Old CPU: i3 4130 New CPU: i7 4790S ASUS Z87-K - Latest bios GTX 780 Ti 8GB DDR3, 240GB SSD. On start up, the fans spin for 20s then stop, then start again and keep going but no post or display. The i3 was working fine, only when I switched to the 4790S did this problem start. I tried a 4770K a few days ago, no display despite trying everything. I Went back to the i3 (working normally) and tried to upgrade today to a 4790S. The fans stop briefly then continue to go but there's no display, only two beeps with a long gap between them (could be post beeps?). Now this problem persists with the i3 too, which was fine before. I've done everything, different PSU and RAM, clear CMOS, latest bios version, only using core components (CPU, MOBO, RAM). It has to be the motherboard right? Thanks everyone

Assembling some old parts into a "new" rig. CPU: i5-4430 MB: Asus H87M-E (BIOS sticker says 0904) RAM: G.Skill Ripjaw F3-12800CL9D-8GBXL (4GB x 2) PSU: EVGA 700BQ I'm trying to assemble some old parts into a working build, but I've run into some trouble. The power indicator LED on the MB turns on when the PSU is powered on. I took this as a good sign. However, after assembling RAM, CPU, cooler, MB, PSU, and then pushing the power switch, nothing happens. No fans, no POST beep, no error code from the speaker. I've tried removing and reseating the CPU, RAM, and PSU cables (ATX and EPS) 2-3 times each I've tried different RAM in different locations to no effect. The PSU passed the paperclip/bypass test (i.e. the PSU fan spins) The online guide for the MB says that this CPU only requires BIOS revision 0304, so the version on the sticker (0904) should be fine. The MB was purchased refurbished, but I'm beginning to suspect that the CPU is the issue here, especially since the green power/status LED on the MB turns on. At this point I'm mostly looking for someone to check my steps and provide a sanity check or point out something I could have missed.

Hi everyone! I've assembled a new build (specs below), however, when I turn it on, I get lights on, spinning fans, USB power, but no video feed on my monitor. I'm running windows 10 on a SSD. However, this SSD was directly removed from an older built (specs below) and installed without any formating or clean install. Bios version is F14. I've asked the store to update it for me since I don't own an older AMD CPU. Therefore, I didn't clean the CMOS to avoid any trouble on this front. I've tried: Reseating the GPU on the new built: nope Changing the GPU for an older GTX 970: it boots as usual and I could see the other components are showing on boot screen and windows. It lives!! Updating the BIOS: already update Using the new GPU on my old built: it boots as usual and the system recognized it. I used a quick benchmark (can't remember the name) and it worked without a problem. Reseating the cables: nope Booting without HD/SSD: nope Booting just the main components (CPU, GPU, MOBO and RAM): nope Changing the PSU: nope (ugh!!! It was my last shot) New built: https://pcpartpicker.com/list/DMsBDq Old built: https://pcpartpicker.com/list/J47gXy Any other suggestions, please? Any help is hugely welcomed!

Just got this motherboard and a new Ryzen 5 5600G CPU Ram is 1 stick of G.Skill Aegis DDR4 3200MHz PC4-25600 CL16. PSU is Corsair 650w Everything turns on but it doesn't display on screen I've tried to ez flash the bios and move the memory around. I've noticed the CPU fan will stop for a split second before spinning again some times and the Light on the motherboard Blinks orange for Dram. At one point it would light solid red for CPU an even shit off after about a minute but now it's just doing the orange blinking.

I am a uni student in digital arts, my machine is my most important tool and it's motherboard fried to a short, code FF. So I got the above stated replacement board in the used market from a reputable seller who provided proof that it functions correctly. My cpu is a Xeon E5 2660 V3 (stated by gigabyte to work with this motherboard), and my memory a 2x8 set of corsair 2133mhz LPX kit powered by a bequiet pure power 11 600w (or 650w I don't remember I lost the sticker). I am dumbfounded as to what is happening with this machine. I have tried every troubleshooting set I can think of (short of checking voltages) and she still won't post. I tried cmos clearing, using the switches on board to change bios settings such as dual bios setting, cpu mode setting, OC settings, everything. Reseated ram, tried a spare Chinese ram kit, cpu reseat with variable mounting pressures on the cooler, I have another known working bequiet 500w system power 9 that I tested with to no change whatsoever, I checked the pins with a magnifying glass, the works. On the manual is specified memory slots (positions 2 and 4)are for a dual kit and 1 when I tried to run with just one and I still get error code 50 memory init error nonetheless. I tried other slot configurations and I get error 61 nvram init error. Finally for some reason the machine booted into my old windows installation, there I was having problems with random crashes once in a while but I figured it's driver problems and I just have to re-install windows. I took a day's break from trying to diagnose this to do work and when I came back the machine started doing the same thing again, no post, code 50. I don't know what to do anymore. I have already lost a school project deadline to this and I need this thing fixed so I can continue my studies and work to pay rent. If any one of the legends in here can help me out I would very much appreciate it.

I've had this PC for about a year and it worked fine. I opened it to tidy up cables and install a HDD. In my ITX case, installing that HDD required temporarily removing my modular PSU. I didn't touch the ram at all. First boot: the VGA light lit up. I realized I forgot to reattach my GPU to the PSU, so I did a hard shutdown and plugged it in. Second boot: the screen said something along the lines of "hardware change detected, press F1 for setup or press f2 to use default settings." I pressed F1 and was sent to the BIOS. I double checked that the HDD was detected and that XMP was still enabled. I clicked "Save and Exit" and was alerted that I had made no changes. I clicked ok. After that and on all future boots: The fans spin and the RGB lights up (even on the ram sticks), but I get no image on the screen. EZ Debug light for DRAM is lit. I'm getting no beeps from the buzzer I plugged into the motherboard. I've tried clearing the cmos, reseating the ram, and bios flashback. I got 3 beeps from the buzzer when I tried booting with no ram installed. Is there anything else I should try? Parts list: Msi b550m pro-vdh wifi Oloy Warhawk ram Ryzen 3700x Rtx 3060ti Evga 550w SFX PSU Sama im01 case Thanks a ton!

So...I got in a hurry on a well priced board for my 9900k. In my blind excitement, I bought a z370 instead of the z390. After installing, I get stuck in boot loop with a few error codes. One is dram and the other is VGA. I reinstalled my poor z310 and have no issues. I can't get to bios to flash for 9th gen support without a post. Did I screw myself? Now I can't afford to buy a new board. Aorus z390 gaming 5 I9 9900kf 32 gb Corsair beast @ 2666 EVGA 2060 black oc edition

I have a slight problem that occurred last 2 days. I recently installed 2 windows update (optional). Upon watching a YouTube video about 3 hours later, both monitors went black. I proceeded to think that a common error occurred and tried to restart. While restarting, my computer did come on but there was no picture out. I contacted Microsoft in hopes of help but sadly there was none. I then plugged my monitor into my motherboard using integrated graphics. There was a post. I tried reseating the graphics card, ram and tried different cables. I have noticed that my GPU fans doesn’t spin on boot (which they normally do). I have also tried updating bios along with AMD drivers. Sadly thag didn’t help. The AMD software says that no product is detected when reality it’s in the correct slot. I have also noticed that the fans spin on boot 1/10 times and that’s when my graphics card work perfectly. I tried to install the drivers but I am then faced with a black screen. PC specs I5-9400 5600xt Msi z390 gaming plus EVGA 1000w PSU Please help.

Hi, my pc have suddenly stopped working and I can't figure what it could be. When I click to turn it on, the cpu fan start spinning and the LAN LEDs also turn on but it doesn't POST. The speaker is working but doesn't do the single beep and there is no display. The display port is vga and is connected to the board Specs: asus AM1M-A with an AMD 5350 The last thing I did: that PC had 5 GPUs connected through risers. For this I had to disable the 3.0 asmedia controller and hd audio controller on the bios. All was good. I wanted to add a 6th GPU and had to disable the LAN controller. Connected a usb to ethernet adapter, turn on windows to check if it works. It does, so I disabled the LAN port. It turned on and I had internet through the usb. Turn off, put 6th GPU and then it never POST'd after this. What I tried: Turning everything off and on (including cables) Disconnecting every GPU and just leave the board + cpu + ssd (also tried without the ssd) Powering everything off and taking the CMOS battery for a few hours and shorting the CMOS reset pins Taking out the RAM (it beeps to signalizing it if I try to turn it on) Change RAM sticks Take CPU power and try to turn on (no beeps) Any additional suggestions are welcome, thank you for your time EDIT: The pc turned on after disabling the LAN port and I had internet through the usb. It was only after of it being disable, when I tried the 6th GPU for the first time that it broke

Hello everyone, I'm hoping to see if anyone has some advice on what I could do about this issue with an AsRock Motherboard that my brother has, I moved all of his parts to this new motherboard and it receives power and even turns on(Fans spin to life lights turn on HDDs start spinning), yet it doesn't post. The Motherboard in question is the X570 Taichi. The only new parts to this system are two new storage devices (a 2TB WD blue & A 1TB Samsung 850 Evo), new RAM (Corsair Corsair Vengeance RGB Pro 2x4GB) and the X570 Taichi motherboard itself, Although I feel like I should mention that the EPS connector on the motherboard itself has an extra 4 pin connector along with the normal 8 pin that is plugged in that I could not plug in with his current PSU that he has. The Dr. Debug Code it gives out after every boot attempt is 04 but everything I've found in relation to this code is a Memory or CPU issue yet everything is installed just fine, I even reinstalled the CPU and RAM and tried with the old set of RAM (Corsair Vengeance LPX 2x4GB) and even moved slots, used one or the other stick by itself and got the same code. I am a bit of a loss even after looking through the manual and online for similar issues to mine. The current set of parts are as follows CPU Ryzen 1600x RAM 2x4GB Corsair Vengeance RGB Pro Motherboard x570 Taichi GPU Gigabyte Windforce GTX 1080 SSD 240gb PNY CS900 SSD Kingston 256 SSD 1TB Samsung Evo HDD 2 TB WD Blue HDD 1 TB WD Blue PSU Corsair RM650X Any and all advice that could help is welcome, thank you for your time.

Hey all! First time posting here me know if I missed anything. TLDR: No post. Asus b450i gaming motherboard White VGA LED + Green LED Specs: - Windows 11 pro 64 bit - PC case: Phanteks evolv Shift - Motherboard: Asus B450 -I Gaming (not sure but latest bios install was BIOS 4602) - CPU: Ryzen 2700x - Ram: 2x 16gb Kingston hyper x 3200 mhz 32gb - Graphics card: AMD Vega 64 Liquid cool. - PSU: Corsair 750watt Problem: PC started up with RGB firmware update. Never seen this before and seemed to take some time. I googled it and found out that people said it could take 45 min, some took over 8h, some people just turned off their PC and worked after, mine took 2+ hours and continued to be on the same screen. Despite the warning I turned the PC off as I had to work that day with my pc from home. Ever since then I am having boot issues, as the warning suggested. I once was able to post into that American Megatrends boot window with the message I had to reset bios for it to boot but I did not have a keyboard attached as I was trying multiple things to repair this problem. Ever since then It does not boot / post. All the motherboard is showing is the white VGA LED but after some time the green LED turns on too at the same time as the white LED Things that do work: All the LEDs on my motherboard are working, also the RGB on the side of the motherboard. My keyboard is turning on its RGB lights. Fans are spinning and the lights on the graphics card are on as well. Things I have tried: Starting the PC without GPU Starting the GPU without GPU and then with GPU Reseating Ram One Ram stick. Ram stick in different slot. No USBs attaced. Different HDMI Cables. Tho they are working as I am using them on my older machine to work. Clear Cmos pins. Clear Cmos with battery. had it out for 3+ hours. I feel I have the motherboard in some update state where it does not know what to do any more. I am running out of options I feel and I am unsure what to do I hope I have not bricked my board! PS: I have updated bios for updating to windows 11 literally a week ago for the security enhancements. It was working perfectly fine before the RGB update. PPS: Image from reddit but same update message on my pc

So sometimes I have a black screen with no post. This usually happens after the PC has been shut down for a longer time, like some hours, a day or many days. After restarting it seems to boot up just fine and everything seems fine while I am working or gaming. I can restart it many times but I won't encounter the issue, this only happens at the first boot attempt.

Hi all, I am having issues with my PC after I restarted it last night. I’ll lead with the specs and then describe the issue & the things I have tried in order to fix it. Specs: CPU: Ryzen 5 3600 (2 years old) Mobo: MSI B450 Tomahawk (2 years old) RAM: Corsair Vengeance RGB Pro (8GBx2, 3000Mhz,CL15) (2 years old) GPU: MSI 1660 Ti Gaming X (2 years old) CPU Cooler: be quiet! Dark Rock 4 (2 years old) Boot SSD: PNY CS900 120 GB (5-7 years old) Secondary SSD: Western Digital Blue 2 TB M.2 2289 (1 year old) Extra HDD: Seagate 1TB 7200 RPM (7-10 years old) PSU: CX650M (2 years old) OS: Windows 10 64 bit I’m unsure of the BIOS version, but it was updated to support the 3000 series before I purchased it, which was in august/September of 2019 and I haven’t touched it since The issue: I have been running this PC for about 2 years now without any major issues. Last night, however, I was experiencing some internet issues for a good 30 minutes while my roommates had no issues whatsoever. Seeing this, I decided to restart my PC. After it shut down, it ended up not booting back up. The PC powers on, and all the fans in the case spin up, including the GPU fans. Also, the RGB on the motherboard & GPU turns on. However, my connected keyboard & mouse do not turn on, nor do I get anything on the display. When the PC initially turns on, the CPU debug light turns on for about 5 seconds while the fans do an initial ramping up, but then it (the debug light) turns off and the fans slow back down. Also, the installed motherboard speaker does not make any beeps during the powering on of the PC, nor does it make any other noise. A video of the issue, let me know if you would like to see anything else and I’ll do my best to show you. My attempted fixes: I have tried all of the following to no avail: Reseating CPU, GPU, and RAM Unplugging and replugging all cables Shorting CMOS & Taking out battery (It was out for an entire hour & 30mins while I attended a football game) Turning it on and off again (at this point probably 20 times) Attempting to boot on one RAM stick Checking for any shorts in the case Again, the PC has been running for 2 years with no major issues, so I am unsure what could have caused this and would appreciate any help as this is the computer I use for gaming, school work, etc. I do not have the money to completely replace it, although I could, if necessary, buy a new motherboard, RAM, CPU, or PSU. Thanks for any help you can provide, I greatly appreciate it.

I had some problems with my secondary PC (https://www.reddit.com/r/techsupport/comments/prdb3f/pc_stuck_at_asus_screen/) problably something wrong with the MoBo so I bought a new CPU and MoBo (AMD R5 5600G and ASROCK A520M-ITX/ac). It didn't post. I know the RAM is working, eventhough, I tryed everystick in everyslot. I changed the PSU with my current one. I have nothing plugged, except monitor and keyboard (which does not light up). So it's either the CPU or the MOBO, but I need someway to figure out what to RMA the part. The MoBo doesn't have any LEDs to debug, so I installed the a speaker, but it doen't beep either. The CPU fan spins up, case fans spin up as well. Thanks a lot in advance.

I was trying to update to windows 11 which said I needed secure boot enabled to work. So I enabled secure boot and then after saving changes my pc wont post. (My pc was working perfectly fine before hand) I have a i5 8600 and gtx 1060 3g I have tried a bunch of trouble shooting techniques but none have worked, like taking out cmos battery waiting for a couple hours, pushing power button to drain remaining power, trying to short the jump pins, reseating my cpu gpu and ram, unplugging and replugging my drives, and taking out all peripherals and add in cards and nothing works. Please help.