Search the Community
Showing results for tags 'lga2011'.
-
Hello there! Looking for a CPU cooler for 15-30euros for Xeon processor E5 2680 v4. It is lga 2011-3, 120tdp. X99 P4 Motherboard. Just to confirm all 2011 Lga cpu coolers mount on 2011-3? Found this cooler for 30euros, any good? Link down below. Leave your recommendations and findings below. Thank you! Xilence - XC051 M704 CPU Cooler Intel: 1700 / 2066 / 2011 / 1200 / 1156 / 1155 / 1151 / 1150; AMD: AM4 / AM5, Performance A+ | M704 Please read the full thread before reply.
-
Hello I recently purchased a HP ProLiant DL360p Gen8 on ebay and i am woundering whats the strongest cpu or it... the way intel names its processors for that time is very confusing and they dont say which lga2011 they use since apparently there multiple versions?
- 14 replies
-
- hp proliant dl360p gen8
- intel
-
(and 1 more)
Tagged with:
-
The computer has the LGA2011 mount like this shown in the pictures. Will I have any problem mounting any LAG2011 compatible cooler on this? I'm sorry if this sounds stupid but my Lenovo workstation has a lot of proprietary things on it so I wanted to make sure this is not one of them. Also i wanted to use this cooler but one page says it supports LGA2011 and the other not. https://www.aliexpress.com/item/1005004434667261.html?spm=a2g0o.productlist.main.3.136a2fccU9q6Qc&algo_pvid=d7d6cb95-a41c-4745-b2c5-7baaafd1575f&algo_exp_id=d7d6cb95-a41c-4745-b2c5-7baaafd1575f-1&pdp_npi=3%40dis!EUR!93.53!74.82!!!!!%40211be10916847654481881538d07e2!12000029172049477!sea!GR!2358484870&curPageLogUid=ufJjxHbob5oh https://www.corsair.com/ww/en/p/cpu-coolers/cw-9060023-ww/hydro-series-h5-sf-low-profile-liquid-cpu-cooler-cw-9060023-ww
- 3 replies
-
- lga2011
- lenovo thinkstation
-
(and 1 more)
Tagged with:
-
Hi everyone. So I got this LGA 2011 Chinese motherboard like a week ago, it had a bios admin password set up but I knew it after buying. Today I wanted to reset the password because it was annoying to type it everytime I boot my PC, there wasn't any option for this, however. So I just set the 'system optimized defaults' and 'default security settings' in security tab, then I rebooted the PC and was meet with the same "ENTER PASSWORD" screen, but it was different, had green lines and question marks on it's sides (pic related) and upon entering the correct password this abomination was released upon daylight.... (2nd pic related) (there is some text but it's impossible to read it (pic related 3&4) I have no idea what to do, resetting the CMOS isn't working and there are no CMOS pins... It's worth noting I also disabled "Intel ME subsystem" thinking nothing would happen. Please help as I don't want to throw this motherboard away!
- 6 replies
-
- motherboard
- lga2011
-
(and 1 more)
Tagged with:
-
Today I'm embarking on a build with the first of hopefully future servers I would like to play with starting with the HPE DL380p Gen8 an early 2010's system built around the LGA2011-0 server platform featuring the C602 chipset. Getting a quick look around the system starting at the front left to right we have VGA a slim optical drive Eight 2.5" drive bays. Unfortunately this server did not come with any usable sleds. LED indicator panel for debugging USB System information tab Power button USB Front UID which pairs with the rear UID Right behind that we have a wall of six hot swappable fans. These things are no slouches. Each fan can put out up to 39.6W for a total of 237.6 watts of just fans. Unreal. Moving farther back gives us a view of the CPU/RAM arrangement. Two sockets, 12 DIMM slots per socket, 3 DIMMs per channel. The plastic guard acts as a air flow guide to direct the air more accurately to where it needs to go. In the back we have two three slot PCI_e risers. One per socket. We'll take a closer look at the slotted cards on the right in a little while. In the very rear we can see all of our I/O A small allen key for system servicing Quad Gigabit NIC Serial port Our iLO Management Port. This will become very important later VGA Quad USB Rear UID which pairs with the front UID Two mini-redundant 750W PSU's. I will be looking at those closer in a bit. Right now the CPU's have arrived so I can start by installing those but we are waiting on the RAM so I think I'd rather do the two at once. The mechanisms designed which hold everything together are a marvel in themselves so I can't wait to dig into this farther.
-
I currently own 2 Intel Xeon e7 4830v2 but no fitting motherboard. As you can see in the attached image the Pin-layout of Ivy-Bridge EX is different than the Sandy-Bridge EP, Ivy-Bridge EP and the Haswell EP layouts so you would need the LGA 2011-1 Socket to run theese CPUs alongside the C602J Chipset. After some digging i found some motherboards that would cost about 5k$ and some Servers that would cost about 400$ without anything in them but i dont own a Server closet. Are there different options i missed or can anyone in the commuinity sell me one used cheaper? I would be happy if someone knows some ways to get them e
-
Hi there. I am once again in need of help lol. As i've calculated on my ryzen build on pcpartpicker.com it estimatedly eats about 394 watts at max.. That was a bit too much for me so I made an ancient xeon build but same here, its tdp was 400+ watts (Idk the exact wattage since the mobo I want isnt on the site) But the Question im really asking is. Do motherboards consume power or is it just the ammount of tdp of the cpu it supports thats taken account in the wattage estimator in pcpartpicker? Thanks for reading once again and hopefully you guys can help me out.
- 9 replies
-
- help
- motherboard
- (and 4 more)
-
Hey all! My first post here, but I'm no stranger to building computers (as a hobby). I follow and subscribe to YouTuber Luke Miani, and he recently posted a video of him upgrading the cheapest 2013 "Trash Can" Mac Pro from its quad core processor to a 12 core Intel® Xeon® E5-2697 v2. I'd like to upgrade my home server, which is running on consumer parts (Intel Core i7 3770k (running at its stock 3.5 GHz), 32 GB of DDR3 (non-ECC) RAM, 4x4TB Seagate IronWolf HDDs in "RAID5" aka RAIDZ1 (ZFS), and a Gigabyte Z77 DP3 series motherboard. It's running FreeNAS 11.3-U1 as my server OS of choice. It's my Plex Media Server, but I'd like to rebuild it to give me more power for stuff like running VMs and other stuff that a 4-Core/8-thread CPU like the 3770k would suffer with and from. With that said, what older(ish) server hardware would you guys recommend I get (everything from the CPU(s), PSU(s), motherboard and case) to perform this rebuild? The performance of the current server I have there isn't bad by any means, but I'd like to have a more proper "server" running, if you know what I mean. Would I benefit from a dual-socket board with two higher core count CPUs, or should I just get a consumer LGA 2011 mobo and get some sort of multi (north of 4-core) CPU? Lastly, if I was to get a dual-socket LGA2011 (for example) motherboard with a single E5-2697 v2 (for example) CPU would the system POST, given one CPU socket would be not occupied by a CPU? I really don't have a budget for this, as I'm just doing some research. This is a theoretical build. Thanks in advance, Shiggitay EDIT: I had apparently already joined here back in December of 2018... So I guess this isn't my first post.... My questions above still apply though. lol
-
Hey all, I’ve been doing some research on compatible CPU’s with the gigabyte G1 Gaming GA-Z97MX-Gaming 5 mobo as I picked up a second hand gaming rig that’s got that in it. I was looking at the gigabyte website and it says the motherboard is 4th and 5th gen intel core i5 and i7 compatible but couldn’t find much information on the 5th gen compatible side. the mobo currently has a 4770k processor in it and was looking to upgrade to like a 5930k as that is a “5th gen” processor but it app rests to be a socket 2011 and not a 1150. Is there a difference between the 2 socket types?
- 4 replies
-
- intel corei7
- 4thgen
- (and 4 more)
-
Has anyone tried those x79 motherboards for home lab purposes? I have seen some youtube video's on them being used for gaming and they seem alright but what about 24/7 reliability? Want to upgrade from my aging X5670 servers and thinking of pairing it with a Xeon e5 2670 V2 and 32GB of ECC ram I have laying around.
-
Looking to use the Intel Xeon E5-2650 for a new server im building because its cheap and its powerful. Only issue is, I cant find anything for that socket thats not $500+. Can anyone recommend me a reasonably priced LGA2011 board? Even if it means using used hardware, i'm okay with that.
-
I have an i7 4930k that I would like to use. I know that I could have gotten more modern hardware for the price this'll probably ending up costing, but I got this cpu for a really good price and would like to use it as it is leagues above my current. The problem I have is that it is a major pain to find LGA2011 x79 motherboards online for anywhere near affordable, at most name brands costing 300$+ USED. I can find a ton of Chinese motherboards for 70$ and up, but very few people have even tried them and reviewed them, and the ones who have did not give specifics on which board it was (I bet that they are all made by the same company, but still) or glowing reviews. I need advice in how to find these elusive boards for a reasonable price, and have overclocking support (that is one of the things that the Chinese boards are said to have, they claim that it can overclock but it is said they cannot and that the VRMs run extremely hot even at stock speeds). This is a cpu and motherboard combo I would like to use for a long time even almost 7 years into the i7 4930k's lifespan, so I need a quality board. I have all the other equipment I would need to do this, even if this is pushing it on my psu wattage, so I should be prepared on that front. Thanks
- 4 replies
-
- advice
- motherboard
-
(and 3 more)
Tagged with:
-
Hi all, I am currently looking to upgrade my X3650 M4 from the e5-2620 inside it currently. However, IBM say its only valid for up to E5-2600v2 series processors, However, E5-4000v2 series processors seem cheaper. Same for some of the lower end E7-8000v2 series. Is this server only limited to E5-2600 series CPU's? I have struggled to find any additional info. However, I am going to assume it's hardware whitelisted for E5-2600 and E5-2600v2 series only. If anyone has any of these processors working in an X3650 M4 any insights would be greatly appreciated.
- 14 replies
-
- ibm x3650m4
- lga2011
-
(and 1 more)
Tagged with:
-
I think the title explains the question. I only find coolers that fit 2011-3. Is that the same socket type?
-
Hello people, I know it's a weird question and yes I know there's not much advantage in overclocking these but it's for pure entertainment I would like to know if it is possible to mod the bios of my motherboard in such a way to control bclk overclocking, I have an ASUS Z9PE-D16 motherboard that I bought on ebay as faulty for a steal and I would like to play with it a little... I have a couple of 2690V2s in it at the moment that run at 3GHz base on all 10c/20t each. I would like to push them a little because I saw people managing a pretty awesome 3.5/3.6 on these which is fantastic... now granted I don't need to go that high... Is it possible?? Is there someone in here with the required knowledge who could tell me how to do it? Thanks a lot and a good day to everybody!
-
hi, recently upgraded to x299, I need a new cooler and if I search for lga2066 coolers I get a limited selection, but I see that some companies use the same mounting system for the lga2011, lga2011-v3 and lga2066, so I was wondering if all coolers that work on lga-2011 will do the same with lga2066?
-
Good morning guys, I have a question for you... I just finished watching Linus' video on the ebay scam of the xeon processors... I think it might have happened to me too then because I today installed CPU-z on my machine which I believed I bought two E5-4650s for but it turns out that in truth I have a 4650 and a 2680... same basic specs and apparently they can work with each other but I can now maybe relate to this mismatch for the ram incompatibility maybe... But the question is, is there a way to like tell the contact from ebay even it's like half a year ago I bought these things that he sold me something not right? Thanks in advance
-
Hello. I recently bought used Corsair Hydro H110 (not H110i). Unfortunately, the seller didn't put LGA 2011 mounting screws in the package. I cannot wait another week to get new mounting kit from Corsair, but the friend of mine has "Swiftech LGA 2011 Mounting Kit" that he doesn't use. Can I use it for my Corsair Hydro H110? Thanks for your advice! Link to Swiftech's mounting kit: http://aerocooler.com/swiftech-socket-2011-kit-socket-lga-2011-mounting-kit/
-
I screwed up a friends build please help! He bought a computer with a Motherboard, 16GB's of DDR3 RAM (Corsair Vengence I believe), a GTX 950 (which he is going to replace with a GTX 1070) and a Seasonic 750watt power supply for under $200. The motherboard is an LGA115x type and I found a 4930K for $170 and I TOTALLY blanked that the 4930K is I believe FCLGA2011 until after he purchased and he can't cancel. I feel like a TOTAL dick but I saw that 4930K and he's the type of person that knows nothing about PC's and I wanted him to have a PC that was equal to or better than my Ryzen 1600 + GTX 1060 6GB rig so that we could play games together and he would have NO issues now and into the future. Original plan was a 4670K but I saw them going for $130-$160 and the 4930K just seemed like the better deal. Idk why I thought it was LGA115x. I really only have experience with the latest 2011-3 sockets and older stuff like the 2600K. I want to get him a cheap 2011 motherboard that won't require BIOS updates to function out of the box. I would have gone Xeon route but I don't want him to have to buy ECC memory when he has DDR3 already. Even though it is a K chip, he likely won't be overclocking at all to start with and if he does, it will be minimal. He'll be using an air cooler. I figure VRM's don't have to be amazing quality since he won't be overclocking really that much if at all and 2011 boards are probably built solid across the board (no pun intended) for power delivery. I REALLY would appreciate ANY help, I do NOT like screwing over my friends, he is a bit impatient but part of that is my fault so I want to get him a board ASAP as he is coming up to visit with the case (supports full size ATX) and I want to get the 4930K running with his steam library. He is currently a console peasant lol but is really interesting in PC gaming. I am really looking for a proven board that WILL work with the 4930K. Unfortunately, I don't live on the tech coast so I can't just test the CPU in someones board. I was hoping to get a used board for $100-160 and I am willing to ship in $20-30 because he's helped me in the past and he's a Veteran with A LOT going on. tl;dr - I accidently got my friend to purchase a 4930K instead of a 4670K for an LGA115x board because I thought it would work. My buddy is a veteran with a lot going on and I am looking for a decent quality 2011 board that will work out of the box with a 4930K. It is important to me. Any help is appreciated.
-
Server Build CPU / Motherboard compatibility
Vanion posted a topic in CPUs, Motherboards, and Memory
Hi, I am trying to build a Server with some refurbished parts. I'm not really sure how the LGA 2011 Socket's compatibility works so I wanted to ask you guys if I can use this CPU together with this Motherboard. Thanks in advance. -
Hi guys! I recently was given an Intel Xeon e5-2697 from a friend who runs a bunch of servers and was just getting rid of some. I plan to build a new workstation around the processor. However, I am pretty new to the PC building world as I just built my first PC last year. I was looking at LGA 2011 boards and most all of them were advertised to support LGA 2011 based i7's. Right now I'm looking to get an ASUS Sabertooth x79 board, but I dont wanna drop $250 if the board and CPU are not compatible with the Xeon. Any help would be extremely appreciated!
-
So I got some old computers that someone didn't need anymore and I thought maybe I could turn into a project and make a few systems for my family. Problem is I'm not well versed in older Intel chipsets and how the naming worked. So my question is, what known brands (think ASRock, MSI, Gigabyte, etc) made motherboard that support chips like the Xeon E5-2665 or the Xeon E5-1607v2? I did some prelim research and found that they fit into FCLGA2011 sockets, and sometimes FCLGA2011 = LGA2011. But does that mean that I can buy a motherboard off of eBay like the ASRock X79 Extreme4 and it'll work? Thanks in advance for your help!
- 4 replies
-
- motherboard
- lga2011
-
(and 3 more)
Tagged with:
-
So I have this old i7, a 3920k. Now the problem is I can't do anything with it because all the motherboards for it are ridiculously expensive. Does anyone know of an X79 motherboard that's actually affordable and worth the money considering how old these things are?
-
So I could get a couple of E5-2650 Xeons (Sandy Bridge) So they're on the LGA2011 socket and I was looking for a motherboard for them. I found this: Dell Precision GN6JF T5600. And the supported Graphics cards don't say anything recent, but it might just be outdated. Is it possible to know this in any way? I currently have an FX-4100 and I'm 100% sure this would be a better setup.