Search the Community

Hi, My parents have an Acer Aspire Z5771 All in One Computer which has an i5-2400s which is not overclocked. It currently runs at 2.5GHZ and the computer has 6GB RAM and a 1TB hard drive. It is currently running Windows 7 Home Premium with the 64 bit version Several times a day, it will suddenly shut down and reboot with a blue screen with a message as seen in the pictures below. I was wondering what was causing this issue and what I can do to fix it? Thanks in Advance

Hi i just built my new rig a couple days ago and everythings been working fine except that sometimes there'll be ticking sounds - one ticks or continuous ticks and i've gotten 2 blue screens so far out of the blue for no reason, with no specific software being run at the point of time, what could be causing the blue screens and ticking sounds?

Hi there, I've run into an issue which I hope someone in the community can help me with. I'd be very grateful for any help! Recently, my PC (I'll include complete specs below) has been just shutting down and restarting, out of nowhere, with the screen going black, followed by a no signal message on the monitor and then a normal startup and PC function; all seems to work fine afterwards, until it happens again. It's happened two or three times so far. I'm not sure if it has anything to do with the apps I'm running, since I've been using the PC with more or less the same apps for some five months now. However, I did recently install Adobe Indesign CS6 and Need For Speed Rivals, the former of which I haven't run yet and the latter of which I was running once when the issue arose (it was on a loading screen after the main menu). There was no blue screen of death, no notable resource strain (I like to keep the task manager open on the Performance tab because I find it interesting), no error messages before, during or after the shutdowns and I was only running Spotify, Chrome and Nikon's ViewNX software, which I've happily run before. However, I recently used Gigabyte's EasyTune 6 and ever since, when the PC starts up, the program gives me an error message with something along the lines of "CPU load fail!!!!". Maybe this has something to do with it? I'd be curious to know what I should check to see if I can solve the problem, i.e, where I should look to see if there are any errors which need rectifying. Thanks very much in advance for your help and don't hesitate to reply if the information I'm giving is in some way incomplete, too! Yours, edisg. My specs: Gigabyte GA-78LMT-USB3 revision 5.0 AMD FX-6300 Asus AMD R9 270 DirectCU II 8GB Crucial Ballistix Tactical RAM 1TB Seagate Barracuda HDD ATAPI iHAS122 DVD writer Fractal Design Integra R2 500W power supply I have the latest 2013/04/23 BIOS version. I run Windows 8.1 64-bit. All my drivers are up to date.

Hey guys! For a few days now, every time I turn my computer on, it performs normally for around 3 minutes before it automatically shuts down, displaying a blue screen stating: page fault in non-paged area. I am thinking of downgrading to Windows 7 again, because I've totally over all the windows 8 bugs and errors. I am also experiencing the error 'Application has been blocked from accessing graphics hardware', and thus freezing my screen, whenever I play any sort of game on steam and I have to restart the game. Do you think I should go down to Windows 7 or stay for Windows 8.1...?

On my old install of windows 7 I would get the following blue screen: https://mega.co.nz/#!xx51yRwS!zUb8DbibquZHkapQ3FJ9sNWsUTOy4pl2BLrri1nnuzw. It would happen every once in a while. I thought it may be a driver or program but I just recently re-installed windows on a new hard drive and just got it after using new HDD for about 2 weeks. This makes me think its a hardware issue, so I ran memtest and nothing. RAM is fine, anyone ever have this blue screen error before? Perfmon: https://mega.co.nz/#!10IVWJDQ!l7h7BsQqqxfzwAGrXGs0weOVXd3riekxQzGyc6SPFco OS: Windows 7 Ult 64bit Previous windows install on other HDD: Win 7 HP 64bit Age: about 2 years OS age: Installed windows on ssd about 2 weeks ago CPU: AMD-FX 8350 oc 3.44ghz GPU: Nvidia Asus gtx 770 2gb Mobo: Asus M5A97 LE R2.0 Power supply: corsair cx 650w Desktop

Hi, I bought a new stick of RAM (8GB, 1600mhz) and after installing it and going into windows to do the usual, I got a blue screen. I was able to get into windows again and as I was about to zip the dump files to upload, I got another blue screen. I am now unable to get past the login screen as my keyboard and mouse don't respond. My specs are: OS: Windows 8.1 64bit CPU: Amd a8 3870k - not overclocked Motherboard: MSI a75a-g35 - all updates installed PSU - raidmax 500w new ram: patriot 8gb 1600mhz old ram: transcend 4gb 1333mhz EDIT: I'm running on the integrated graphics for the moment, however I do have and amd R9 280x 3gb - no difference when it is installed either I've tried using the old ram, the new ram, the old ram one stick at a time, safe mode and yet I still cannot get into windows anymore. The blue screen error was: IRQL_NOT_LESS_OR_EQUAL. I am unable to upload the dump files as I cannot get into windows at all. I can however use my mouse and keyboard in the bios. Also the pc doesn't want to POST sometimes, and when it does I can do anything until I get to the windows log in screen.

Hi, i just updated my avast today, i got a blue screen, the only way to fix it was to go back, so liked to know if anyone elts is haveing this problem?

Hi guys, I hope you can help me... I am having BAD_POOL_HEADER - memory allocation problem or something Can anyone help me? I have attached a pc of my laptop specs. I have 4 cores and after unparking them i cannot even do multitasking in google chrome. Every time i try to play youtube videos i have to close all the other tabs no matter what they are otherwise my computer just goes to BSOD and then restarts. First time this happened was after 1 day from when i unparked my cores, next day when i was playing a game in facebook i opened another tab and started linus video but then after 3 minutes i got BSOD saying: BAD_POOL _HEADER and then it a. I tried this again by opening same things with 2 tabs and it has been happening since forever its been 2nd day today. Also everytime i get BSOD i loose all the chache and everything present in chrome, even after changing the internet options settings history to max of 20 days it still saves nothing Please help me Thanks in advance Oh and yes my hard-disk is changed it was 750 GB ( 7.2k RPM ) and now is 500 GB with unknown RPM. Please help me Thanks again

so i have a 7970hd (xfx), fx8350, 16gb ram corsair vengeance. Recently i went on amd's website to see if there were any new driver updates for my GPU and apparently there was so i downloaded it and about 10 mins later my computer blue screened. i have had csgo crash twice on me so far and when i am playing it or watching some youtube videos on full screen it is stuttering and kinda jumping. I dont know if this is my driver or my actually GPU doing it. I have a solve PC issues message on my task bar which shows this ( http://gyazo.com/2790ad3c8ae2f38cbaeee470bcac9eea) but then when i click the view message details i get this ( http://gyazo.com/f67c811133d90750781a449e3eedad71 ) Can someone please tell me what is wrong with my PC or at least what i am doing wrong. Thankyou so soo sooo sooooo much Overloss!!!

I have had my PC for about a year now and I have had no viruses and no hardware issues. I can use my PC for hours on end watching videos playing games and doing whatever. Sometimes when I leave it on doing nothing when I come back it says windows has recovered from a crash. When I click details it says Blue Screen. Why does it just randomly Blue Screen but recover? I have never actually seen it blue screen and it never does it when I am using it.

Hello everyone recently I have been getting this blue screen of death. I have tried a variety of things including replacing a hard drive and update all the drivers I could find. I will post the Windbg output for the dmp file created. Any help anyone could provide would be really appreciated. Windbg DMP file outout Microsoft ® Windows Debugger Version 6.2.9200.20512 AMD64 Copyright © Microsoft Corporation. All rights reserved. Loading Dump File [C:\Windows\MEMORY.DMP] Kernel Summary Dump File: Only kernel address space is available Symbol search path is: SRV*C:\symbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Personal Built by: 7601.18869.amd64fre.win7sp1_gdr.150525-0603 Machine Name: Kernel base = 0xfffff800`02c19000 PsLoadedModuleList = 0xfffff800`02e60730 Debug session time: Sun Jun 28 16:45:50.089 2015 (UTC - 4:00) System Uptime: 0 days 13:27:56.901 Loading Kernel Symbols ............................................................... ................................................................ ........................ Loading User Symbols Loading unloaded module list ......................... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 124, {0, fffffa8009d08028, be200000, 5110a} Probably caused by : GenuineIntel Followup: MachineOwner --------- 3: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* WHEA_UNCORRECTABLE_ERROR (124) A fatal hardware error has occurred. Parameter 1 identifies the type of error source that reported the error. Parameter 2 holds the address of the WHEA_ERROR_RECORD structure that describes the error conditon. Arguments: Arg1: 0000000000000000, Machine Check Exception Arg2: fffffa8009d08028, Address of the WHEA_ERROR_RECORD structure. Arg3: 00000000be200000, High order 32-bits of the MCi_STATUS value. Arg4: 000000000005110a, Low order 32-bits of the MCi_STATUS value. Debugging Details: ------------------ BUGCHECK_STR: 0x124_GenuineIntel DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: System CURRENT_IRQL: f STACK_TEXT: fffff880`02fdfb58 fffff800`03217a3b : 00000000`00000124 00000000`00000000 fffffa80`09d08028 00000000`be200000 : nt!KeBugCheckEx fffff880`02fdfb60 fffff800`02da6c33 : 00000000`00000001 fffffa80`09a8cd30 00000000`00000000 fffffa80`09a8cd80 : hal!HalBugCheckSystem+0x1e3 fffff880`02fdfba0 fffff800`03217700 : 00000000`00000728 fffffa80`09a8cd30 fffff880`02fdff30 fffff880`02fdff00 : nt!WheaReportHwError+0x263 fffff880`02fdfc00 fffff800`03217052 : fffffa80`09a8cd30 fffff880`02fdff30 fffffa80`09a8cd30 00000000`00000000 : hal!HalpMcaReportError+0x4c fffff880`02fdfd50 fffff800`03216f0d : 00000000`00000008 00000000`00000001 fffff880`02fdffb0 00000000`00000000 : hal!HalpMceHandler+0x9e fffff880`02fdfd90 fffff800`0320ae88 : 00000000`00000001 fffff880`02fd7180 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55 fffff880`02fdfdc0 fffff800`02c8c1ac : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40 fffff880`02fdfdf0 fffff800`02c8c013 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x6c fffff880`02fdff30 fffff880`04dc7c61 : fffff800`02c97089 00000000`003431bd fffffa80`0a2ca2d0 00000000`00000000 : nt!KiMcheckAbort+0x153 fffff880`02fffb58 fffff800`02c97089 : 00000000`003431bd fffffa80`0a2ca2d0 00000000`00000000 00000000`00000000 : intelppm!MWaitIdle+0x19 fffff880`02fffb60 fffff800`02c8559c : fffff880`02fd7180 fffff880`00000001 00000000`00000001 fffff800`00000000 : nt!PoIdle+0x52a fffff880`02fffc40 00000000`00000000 : fffff880`03000000 fffff880`02ffa000 fffff880`02fffc00 00000000`00000000 : nt!KiIdleLoop+0x2c STACK_COMMAND: kb FOLLOWUP_NAME: MachineOwner MODULE_NAME: GenuineIntel IMAGE_NAME: GenuineIntel DEBUG_FLR_IMAGE_TIMESTAMP: 0 FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE Followup: MachineOwner Here are my system specs. OS Name Microsoft Windows 7 Home Premium Version 6.1.7601 Service Pack 1 Build 7601 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Manufacturer System manufacturer System Model System Product Name System Type x64-based PC Processor Intel® Core i7-2600K CPU @ 3.40GHz, 3401 Mhz, 4 Core(s), 8 Logical Processor(s) BIOS Version/Date American Megatrends Inc. 0301, 9/16/2011 SMBIOS Version 2.6 Windows Directory C:\Windows System Directory C:\Windows\system32 Boot Device \Device\HarddiskVolume1 Locale United States Hardware Abstraction Layer Version = "6.1.7601.17514" Installed Physical Memory (RAM) 11.0 GB Total Physical Memory 10.9 GB Available Physical Memory 6.71 GB Total Virtual Memory 21.8 GB Available Virtual Memory 16.5 GB Page File Space 10.9 GB Graphics Card: AMD Radeon HD 7700 and intel HD Graphics 3000 Motherboard: Asus P8z68-v gen 3 Hard Drives: Samsung SSD 840 PRO and WDC WD5000LPVX-22V0TT0

Obviously when overclocking there is a fair degree of trial and error involved, trying to get voltages as low as possible while still remaining stable etc and a common thing I have found when overclocking is if one goes too over the top the system will experience the blue screen of death on startup. While I know I can just go back into the BIOS and fix it, does each time my computer blue screens negatively effect its live span or just overall well being? Thanks (overclocking a 4790k if it matters)

Okay, background information first, here are the relevant specs: i7 5930k (stock) 16gb Corsair Dom Plat 2666MHz Asus X99 Sabertooth Zotac GTX 980 Ti AMP! Extreme edition Boot drive: 512GB Samsung SM951 After running Windows 8.1 pro for around 4 days flawlessly - playing games, etc. I decided to make the jump to Windows 10. Because of the legitimacy of my OS I decided to buy windows 10 and do a fresh installation. I created a bootable usb drive with the windows 10 ISO, installed it with no issues, then downloaded the drivers for my motherboard, which were the same as the ones I'd had to use for Windows 8.1. I started with the chipset driver, followed by both LAN drivers and then the Asmedia usb 3.1 driver without restarting - so far so good. shortly after, my screen resolution hopped up to its native 1440p resolution without me installing any nvidia drivers. I check my programs to find them already installed. Thinking it was odd but not investigating further, I downloaded and installed Ai suite 3, at which point I rebooted. Got as far as the sign in menu, typed my pin in and it came up with DRIVER_IRQL_NOT_OR_LESS_EQUAL(storahci.sys) and restarted. Upon restart another blue screen error saying windows failed to load correctly appeared and prompted trouble shooting options. After trying to reset the PC, checking bios settings etc. I went for a full re-installation of Windows. After trying the process normally again with the same result, I researched some options I could try. Seeing as Storahci.sys can be caused by key component driver failures or corruptions, I thought back to the nvidia drivers being installed when I'd tried the first time. I go through the same process again, find the nvidia drivers there without me installing them again. I downloaded install display driver, rebooted into save mode and cleaned the drive of the nvidia drivers (this was 353.54 driver) and any associated files, also turning off windows automatic driver installation for new hardware just to be sure. Now I had a fresh OS with no motherboard drivers and no GPU drivers. I then went about installing the drivers from the asus website using a newer chipset driver, then restarted after each driver was installed to make sure none of them were the problem, the chipset and both LAN drivers installed just fine along with the audio driver. I moved on to the geforce drivers, and downloaded the newest 355.60 windows 10 driver and loaded it fine. Finally I installed the Asmedia usb 3.1 driver, Ai suite, cpu and gpuz, a Nintendo installer for steam, chrome, vlc and a couple of other programmes, aida64, and unigine. This all worked fine, I only rebooted once through these installations when prompted by Ai suite. I'd just decided what game I wanted to download and play first on steam and thought I'd download and run crystal disk mark. It installed just fine. I select the 1gb run and close any other programs down. Started the run and the blue screen 'Windows needs to shut down /restart error' appeared. Windows reboots, scans the disk to try and repair it, finishes and boots into the boot options menu, I selected continue to Windows 10.i got the the start menu, typed my pin in and the DRIVER_IRQL_NOT_OR_LESS_EQUAL(storahci.sys) appears again. After restarting, booting into the sign in menu, the same error appears when trying to sign in. I'm now in the bios trying to figure out if any settings need changing but can't see what else it could be now. It doesn't seem to be the GPU, The bios is set up to run from the sm951 drive just fine, as it did so with Windows 8.1 pro. The drive itself isn't overheating. Sorry about the long post, but it'd be great if I could have some help sorting this out. It's a workstation PC for a graphic design and Adobe CC course so is needed ASAP.

Hey guys, I recently bought 2 sticks of http://www.newegg.com/Product/Product.aspx?Item=N82E16820227124 to go along with the 2 previous sticks, and had trouble getting them to work together. I did a lot of testing and determined none of the sticks of ram are bad and the motherboard isn't bad either, the new ram just doesn't want to work with the older ram. I bumped up the NB voltage and the memory voltage and had success until my computer started randomly freezing. I bumped up the NB voltage again, and the freezing stopped, but now weird stuff is going on like getting a black background, blue screens, windows saying my registery is up ect. What can I do to get rid of this nonsense? The pictures below are the following: 1. a speccy screenshot of the old 2 sticks of ram working 2. a speccy screenshot of the new 2 sticks of ram working 3. a speccy screenshot of all the ram working together 4-7. What I see when I get into windows Any advice at all would help alot. I don't think bumping up voltage is going to work anymore. I have the memory voltage set at 1.92v and the nb voltage at 1.7v. Thank you guys in advance!

I RECENTLY BOUGHT PARTS FOR A NEW PC, I USE MY OLD HARDRIVES FROM MY OLD COMOUTER WHICH WORKS FINE ON THAT COMPUTER, BUT WHEN I USE THEM WITH MY NEW PC I GET THIS BLUE SCREEN. SPECS: NVIDIA GTX 970 GAINWARD. MSI GAMING Z97M. I5 4690K. CORSAIR VS 550W. 2 CHIPS OF 4GB RAM PLIS HELP ME I HAVE BEEN TRYING TO FIX THIS FOR 1 WEEK, BUT I CANT FIX IT. OleL.

So here's what happened I got a blue screen of death shortly after logging into Windows 7 then the system rebooted. Then after it booted I got another blue screen of death. Both blue screen of deaths from what I've recall are due to memory dumps. After the second reboot I've got a blank screen. So here's what I've did by far: 1) Push and hold the power button to shut down the computer, switch the PSU to off unplug power cord and all usbs. 2) Plug the power cord back in, switch the PSU to on and powered on the computer. Still blank screen. Here are the specs of my 7+ year old computer: -CPU Intel Quad Core 2 Q6600 -Motherboard ASUS P5N-D -Memory 8GB XM2 DDR2 Corsair Memory -Storage WD Velocopter HDD, a 500GB WD harddrive (inside the case but not connected), two 1TB HDDs (WD & Seagate) in RAID 1 and a Samsung 840EVO SSD connected to a SIIG/Marvell I/O controller -Graphics Card NVidia GTX 560 by EVGA -Chassis Antec P181 -External Battery backup and surge protection APC BR1500G

i made a pc the other day and ran into blue screen is this the cause of the old drives or old windows that needs to be reformatted ive been looking up stuff and most say to change the stata to AHCI which is already picked so what is going on here

Hello everyone! First off, I'll tell you my specs: GPU - R9 280x Vapor-X OC CPU - FX-8350 4.0Ghz RAM- 10GB PSU - 850W CPU Cooler - Hyper 212 Evo MOBO - MSI Gaming 970 Okay, so here I'll tell you about the issue I am facing with Grand Theft Auto V at the moment. I've been getting frequent crashes and freezes while free roaming randomly or playing a mission. I've been looking around the internet and have tried multiple fixes. I ended up figuring out that the freezes had to do with a memory leak that the game has at the moment (Hoping for the fix ). So I messed around with some things in my settings and eventually got it to work for about 30-60 minutes at most. There is also something else that worked but is bothering me, if I under-clock my GPU Core clock it seems to run perfectly fine and never crashes unless it's mod induced. (Should mention that the GPU was factory overclocked and was not messed with by me.) I don't understand how these 2 things effect each other. I normally don't have blue screens I just lock up and need to hard shutdown or have a red screen, but this time I guess you could say I was lucky to get a bsod to show someone and hopefully you can help me out! I attached the file to this post, I hope you can help. Thanks! BSOD.txt

Hello friends, I'm having a small issue with my current PC, a few months ago a tube began leaking and soaked the motherboard and graphics card. When this came to my attention I unplugged my computer. Long story cut short I waited a few day for everything to dry, the graphic card didn't make so I went out and got two Gtx 970's I was lucky system booted right up....the problem I cant over clock at all, if I change the setting from anything but auto windows cash giving me an error I don't remember what the code is but it related to overclocking. my question is what to do besides overclocking my system runs perfect, I on the x79 chipset I know its to late in the game to replace x79 parts, should I move to x99 or wait for the next cpu like skylake-E or something Help.

Hi, my system blue screens every now and then. I was getting quite a bit of "unexpected power loss" due to Asus AI Suit III using "DipAwayMode.exe". I uninstalled AI suit. Same errors continued. I changed the PSU with brand new EVGA NEX650 Gold. Several hours later new error occurred: "The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly." Any clue what's going on. My windows 8.1 is fresh, and all drivers are up to date downloaded from ASUS website. I am running: i7 4790K stock clock Z97 Maximus Gene VII 2x8GB Gskill TridentX at 2400MHz (XMP enabled) Samsung 850 EVO 250GB for boot drive GTX 970 Gigabyte G1 EVGA NEX650 Gold Every single thing is water cooled. I stressed the system with Prime95, Aida64, Valley, Cinebench, Firestrike..... the maximum temp I could get is 50deg C when stressed beyond any typical gaming/rendering/processing intensive load. More interestingly it does not seem to be stress related issue, just happens randomly. All stress test so far successful Any suggestions? Thanks! BTW here's the beauty https://uk.pcpartpicker.com/b/nDVYcf

I've been getting a few blue screens on m laptop for the last few weeks. They seem to come in groups, I can go weeks at a time with everything working fine and then I got two more this evening in the space of an hour. I've taken pictures or the two most recent blue screens in question. If anyone's got some ideas as to how I can get rid of these then I'd really appreciate it __________________________________________ If it helps, my specs are as follows HP 630 Pavilion 15.6" Notebook (about 5 years old) Intel i3 370M (Dual core, 2.4GHz) 8GB RAM (2x4GB; one included, one added) Integrated Graphics Hitachi HTS547550A9E384 450GB Hard Drive Windows 7 SP1

I'm new to the overclocking world. I'm using AMD Catalyst to overclock my CPU since I can't find a halfway decent guide using my bios. Halfway through the 4000 test I got the blue screen clock watchdog. I was holding steady at 59 degrees using the stock cooler. My current setup is as follows: CPU: FX-8320E MoBo: Asus M5 A97 R2.0 Ram: Crucial 1866 2x4Gb GPU: XFX R9 280 Power: 600W OS: Win 8.1 64bit Any and all assistance is welcomed.

Hi. I need your help due to my recent expiriance while gaming with my Gaming PC. Whenever I start playing any Game (mostly CS:GO, Smite) my Pc freezes and exits the game. If I don't restart my Computer and start up the game again my PC crashes and goes to Blue Screen My PC Specs: CPU: I5-4690K (Not OC) GPU: Radeon HD 7850 2Gb GDDR5 RAM: 8Gb Crucial Ballistix (2x4) and (Win 7 64bit) I even reinstalled OS and this still happens.. All drivers are the newest ones... still crashes

My computer has been showing a blue screen again. It doesn't appear to be tied to loads since it has happened when just browsing the internet. I already checked my ram and ssd. I used bluescreenview to evaluate the minidump files that caused were shown as fatal errors. All of the shut downs are caused by the driver win32.sys. Info fore BlueScreenView Bug Code Check: 0x0000003b Caused by driver: win32k.sys 50% were caused by: wiin32k.sys+c4283 50% were caused by: wiin32k.sys+22c9ed

Hi I recently build a buget game pc, I have installed windows 7 ultimate (from a iso that I downloaded with torrent and put on a usb) but when I want to install the drivers of the graphic card I got a blue screen, so i thought to install windows again but when I install the OS I got again a blue screen, the crazzy thing is that everything is compatible with each other so if someone knows the answer please reply ( this is in the system: Cpu: AMD A4-5300 motherbord: MSI A58M-E33 FM2+ Ram: GeIL Dragon ram 4GB 1333MHz HDD: Western Digital 1TB WD10EZEX)