Search the Community
Showing results for tags 'amd'.
-
My budget is 5.000.000 IDR (308,58 USD) Country: Indonesia Games, programs or workloads that it will be used for: Web Browsing, Watching Movies, School Stuff, Maybe Minecraft the specs i chose is Amd ryzen 3 3200g Msi b450m-a pro max Corsair Vengeance LPX 16 GB (2x8) 3200mhz Acer k243y e monitor Cube gaming blig case i already have ssd, keyboard, and mouse
-
Hi Folks. I bought a used XFX Radeon RX 5700 because the my old 1060 died. The seller was runnign firestrike and timespy benchmarks and the tomb raider (ingame) benchmark while. I could see it running for myself. There was no problem. After i installed it into my system (at the time: r5 2600, 16gb ram 2400mhz, 530 watts PSU, asus prime x370 pro) i played more pixel indie games at the time and not any demanding games. Later i played Diablo 2 Resurrected, Palworld, Witcher 3 and the game crashed only after a few minutes in game. First i got flickering in and out of the game and than a crash to desktop with a massage for driver timeout. Again and again and again and again.... I tried to solve the problem by reinstall windows and clear install the amd software. After that i tried to use the enterprise software, also not working. Then i tried drivers only, same s**t. After looking for help on YT and Goolge i thought i found the problem: the PSU. changed it to a corsair cx750m (750 watts) and did not used the daisy chained 8-pin cables for the card but give it 2 individual cables. It looked like it was working for a bit but.... nope. after a reboot i got the same problems again. I also tried to reduce the speed of the card over MSI afterburner but it did not work at all. If i use benchmarks (no ingame benchmarks) its running alright. I was so fed up i installed an old 1060 from a friend. My old mainboard died on me last month and i could do nothing untill now i got a replacement (have not much money because of continuing my education). The "new" system is a R5 5500, gigabyte a520m s2h, 16gb ram with 3200mhz and the same 750 watts PSU. So i gave the RX5700 another try.... As you can think... it did not work at all and i got the same s**t like befor. The LTT Forum is my last try to get that beast to work. If not... save up some money and change to team green. Im at the end of my wits here. Thanks in advance.
- 2 replies
-
- amd
- radeon rx5700
-
(and 3 more)
Tagged with:
-
Current SPECS: Ryzen 5 3600, 6600XT, 32GB 3200MHz, Aorus Elite B450M, XPG Pylon 650 Budget (including currency): 100-150 USD Country: Pakistan Games, programs or workloads that it will be used for: GTA V, RUST, RDR2, AC Valhalla & I do 4K video editing too (mostly large projects). Plus I'm learning UE5 on this machine.
-
Hey there everyone! Thanks to some folks here in the forum (huge thanks to @YoungBlade) I've been guided in my upgrade to AMD (first time ever touching an AMD PC). Even if I already have 2x16GB 2666MHz RAM in my current PC and could very well transfer it to the new platform, I wanna see what upgrade I can make which would be cheap and far better than what I have. Maybe 3600MHz? I don't know anything about timing or anything so all help is welcome. Would prefer keeping the same amount of memory, and the cooler I'm getting allows up to 62mm memory modules. I'm welcome for new and used options, either Amazon or eBay, or just basic recommendations based on your local used market, might have similar deals. If there isn't something I can score for less than $45, then I'll just wait for that specific upgrade since I'm already doing a ~$300 upgrade and my wallet hurts. Any comments welcome!
- 8 replies
-
- recommendation
- amd
-
(and 2 more)
Tagged with:
-
I bought this CPU about 2 years ago, and bought a cheap LGA2011 motherboard. The CPU did not fit so it has just been on a shelf for 2 years. CPU is a 12 core 2.60GHz Xeon E7-4860V2
-
I'm planning to buy GPU for my first PC and currently only RX7600 from AsRock is available, are GPU from AsRock reliable for long term use?
-
I have decided to upgrade, currently there is a 5600 in my PC already, so in that case you would say "Then the obvious choice is the Ryzen 5900x" the thing is that I also want to upgrade after that but I would need to change my motherboard anyways at the end so its the same as with the 7600 eventually there will be a need for a motherboard swap but maybe the 5900x is better because upgrading is cheaper but I also want to add more Ram to my PC and that would cost more on AM5 than on AM4. On performance the 7600 and 5900x are very similar actually kinda like the 5600 and the 3900x, but when someone wins in gaming it is the 7600 but who wins in multi-core is the 5900x and honestly I kinda care more about multi core beacuse I am a person who likes running multiple apps at the same time and several instances of Visual Studio when I do coding and the 7600 wins in x264 encoding but honestly I think it would be less loss on performance with a 5900x. (Although performance loss probably would be barely a factor here.) So yeah I am kinda divided with this because I have 32gb but because I sometimes do many, many things at the same time it fills up and 64gb ram is very costly on AM5 compared to AM4 this is beacuse AM5 has DDR5 and AM4 DDR4. In conclusion I want you guys to tell me which should I pick up beacuse I am analyzing all my choices and I am thinking to go with the 5900x but then the upgrade thing is also killing me but it is pointless because after Zen 5 probably a new socket is coming.
-
PC specs: CPU: Intel I5-10400 GPU: GTX 1660 Super PSU: Corsair CV750 (750w) RAM: 16GB Motherboard: Asrock B460M I'm looking to upgrade to a better GPU as my current GPU is deteriorating (Game stutters and such). I play on 1440p (3440x1440 monitor resolution). Could anyone recommend some bang-for-buck GPUs to buy?
-
Hello,as the title suggests i have a build with a FX8370, it started having issues with overheating and shutting down, after installing AMD Overdrive and doing some testing it looks like it always runs at full speed (Turbo: 4320MHz @1,425 V and turbo off:4019MHz @1,35V) at idle the temps are around 40 degrees from the thermal margin, but they go to -20 degrees before shutting down (since the margin is @60 degrees, it means it goes to 80 degrees Celsius) i have never overclocked it, it's as is from new, all setting are set to default in bios. I'll provide a photo at idle. Specsheet: CPU: AMD FX8370 GPU: Nvidia 1050Ti Motherboard: gigabyte 12dc1-amd9se-250cr RAM: 16GB DDR3 PSU: Thermaltake 470w OS: Win11
-
I am crossposting this from Reddit to hopefully get some insight. I just upgraded my PC and I'm running into an odd issue. I bought a PC with an AsRock B450M-HDV R4.0 board with a Ryzen 3 2200G. I upgraded the CPU to a Ryzen 9 5900X and installed an ARC A750. I purchased a Thermalright Frost Spirit 140 to cool the CPU. I updated the BIOS to version 4.90 to make sure my CPU was compatible and I was able to enable Resizable Bar. I ran into issues last night where the PC would shut down almost immediately after getting into Windows. I had a Thermaltake 500W so I figured that was where the problem lied. I picked up an EVGA 750W PSU and the system is stable while web browsing and while discord is running. I attempted to boot up CS2 to see a comparison in frame rates and quality. As it was getting started the PC shut down again. Update: Black screened when downloading update for Phasmaphobia, then black screened when launching browser. It seems to not get as far as before. CPU and GPU temps are normal. CPU ~54 GPU ~64 Update: ran sfc scannow and it reported it had fixed errors. I checked the windows event log and there were a lot of errors, but nothing directly pointing to anything. Any suggestions?
-
Hi, I update my current rig incrementally, which means, I buy some new hardware, or get some spare hardware from someone else and swap it with my running hardware. Now since I bought a RX 7900 XT, every time I start watching Videos on YouTube or Crunchyroll, I get audio and video freezes "stuttering" / "cracklings". If I play Star Wars Battlefront II, Back4Blood, Satisfactory, Age of Empires II, Forts, Frost Punk, Civ VI or Remnant, I also get those freezes. Those freezes are pretty annoying, because they also let cause audio-issues in Discord. The problem presents itself as follows: At random moments, I can't hear anyone in discord, while everyone hears me talking. This get resolved, by reconnecting to the channel. All I want is to play happily games with friends in 1440p and maxed out graphics.. This was my running previous setup: Windows 10 Pro (64-bit) ASrock B550M Steel Legend (BIOS Version 2.50, latest) AMD Ryzen 5 5600G (no overclocking) G.Skill Trident Z RGB DIMM Kit 16GB, DDR4-3000, CL16-18-18-38 RAM (no XMP Profile) XFX Radeon RX 480 GTR 8GB (stock) Samsung SSD 970 EVO Plus 2TB 2 Crucial MX500 SSD each 1TB (Photography, other legacy-stuff, which I should review and delete) 4TB Seagate IronWolf ST4000VN008, HDD (Backup and Stuff) be quiet! Pure Power 12 M (850 W 80+ gold) 2 DELL U2515H Displays with DisplayPort New and current setup: Windows 10 Pro (64-bit) ASrock B550M Steel Legend (BIOS Version L2.62, latest beta) AMD Ryzen 5 5600G (no overclocking) G.Skill Trident Z RGB DIMM Kit 16GB, DDR4-3000, CL16-18-18-38 RAM (no XMP Profile) Sapphire Radeon RX 7900 XT 20GB (stock) Samsung SSD 970 EVO Plus 2TB 2 Crucial MX500 SSD each 1TB (Photography, other legacy-stuff, which I should review and delete) 4TB Seagate IronWolf ST4000VN008, HDD (Backup and Stuff) be quiet! Pure Power 12 M (850 W 80+ gold) 2 DELL U2515H Displays with DisplayPort What I have tried: Take a look at display configuration: 1440p 60Hz Disabling fTPM Disabling any AMD Adrenalin Overlays Clean Driver Installing with DDU and AMD Cleanup Utility 22.12.1 (Problem is present) 22.12.2 (Problem is present) 23.1.1 (Problem is present) 23.3.1 (Problem is still present, but a little less annoying) Changed PSU with other 850W Reviewed the GPU Cabling (I used two separate cables for power-delivery) Updates BIOS Firmware to L2.62.. I have disabled Hardware-Acceleration in Firefox Now, I can at least watch YouTube Videos, with crackling and a little less audio/video freezes/stutters. I have disabled Hardware-Acceleration in Discord A little less audio crackling and stutters Does anyone have any idea? I feel very tired from trying... Thanks in advance!
- 12 replies
-
- rx7900xt
- ryzen 5600g
-
(and 1 more)
Tagged with:
-
Hey everyone! I'm a bit stuck (and frustrated) at the moment trying to install drivers for my GPU on my newly built PC. My configuration is as follows: - CPU: AMD Ryzen 9 7900X3D - CPU Cooler: Thermalright Peerless Assassin 120 SE 66.17 CFM - Motherboard: Asus PRIME X670-P ATX AM5 - RAM: 4x Corsair Vengeance 32 GB DDR5-6600 CL32 - Storage: Samsung 980 1 TB M.2-2280 PCIe 3.0 X4 NVME - Secondary Storage: Crucial MX500 1 TB SSD - GPU: ASRock Phantom Gaming OC Radeon RX 7700 XT 12 GB - Case: Fractal Pop Air RGB ATX - Power Supply: Corsair RM750e (2023) 750 W 80+ Gold Certified (Fully Modular) Every time I am trying to update the drivers for the GPU, my system crashes, and restarts (the keyboard starts lighting up and turns off again at least 3 times every time this happens). I use AMD Adrenaline for the drivers, but I also tried it in the Device Manager. Then, sometimes, it boots back into Windows, but sometimes it goes into Automatic Repair, and then I have to reinstall Windows. I installed Windows 11 at first (several clean installs, but they didn't help). Now I've installed Windows 10 but the issue persists. When I looked in the device manager, the only missing drivers were the ones for my GPU (Radeon 7700 XT) and the Display Adapter driver. Those are the ones that my system crashes on. In the device manager I got error code 31. Any help is greatly appreciated! Thank you
-
Hi, I'm planning to buy a new monitor this summer Budget: 25 000CZK / 1080USD GPU: 7900 XT Requirements: -OLED display What I've been looking at reviews etc., I like the two monitors ASUS PG27AQDM and ASUS PG32UCDM I'm more interested in the PG32UCDM (Czech price 1 800 USD) but for that one I doubt it will drop 853 USD in price in 3/4 months so that one is out. And the other one I also found good and I'll probably choose it but before that I'd rather come here to ask if there are any better alternatives etc.
-
I'm becoming more mobile and not using my desktop much. I'm considering of buy a 14" laptop for web development and light/casual gaming. It should handle 4k monitors easily without stuttering. I'm considering the Legion Slim 5 Gen 8 AMD (14") with RTX 4060, 32gb ram, AMD Ryzen™ 7 7840HS. I'm used to lenovo's warranty and they're quite good. What do you guys think?
- 1 reply
-
- amd
- web development
-
(and 2 more)
Tagged with:
-
hello considering the 7900x3d is 50 euros more in my country is it goin to give a boost to gaming paired with an rtx 4070 super at 1440P resolution? the build is goin to do some productivity tasks to but gaming is a big part of the build(7800x3d is a no option).thnx in advance
-
Specs: GPU, Amd Radeon rx 6600 ASRock challenger Mother board, B650m aorus elite ax CPU, ryzen 7000 RAM, Flare x5 ddr5, 16 gb (X4) PSU, Corsair rm750e Details: When first building the computer everything was going well, the out of case test was successful, it booted to bios and everything was detected, after test conclusion I put it in the case, attached a couple extra fans, after everything was set up the red CPU indicator light is now on (previously it was not, no OS has been assigned or used for the computer, brand new parts) I have tried reseating CPU, I analysed the pins, none of which are bent, there is an even spread of the correct amount of thermal paste on the CPU itself, none has touched any of the pins. I have removed three of the ram sticks and have kept one at the farthest edge away from the CPU itself, the PSU works fine, the fans are all working as they should, I don't know what to do.
-
- troubleshoot
- cpu
-
(and 3 more)
Tagged with:
-
So i build a new pc, but im having problems in windows 11. So when i open windows 11 my blue usb stop working my wifi and bt works for a few minutes. My build is: cpu: ryzen 5 7600 mobo: msi b650 gamming plus wifi GPU: gigabyte Geforce 4070 storage: WD_black sn770 mvme 1TB Ram: T-force Delta ddr5 32g 5200MHz Cooler: nox Hummer m-360 argb Case: lian li 216 At this moment i already tried about everting possible like: update bios install the most recent drivers amd chipset drivers clear cmos remove controllers from device manager remove pc parts (like gpu ) to check for changes check if any usb is physically damage command line commands check if io shield is making short shorkits etc.. nothing of the above have worked. The only error that i found in w11 is error 24 in my AMD USB 3.20 eXtensible Host Controller that only appears when everting fails and some usb over current erros when i boot my pc. So can anyone help me with this issue?
- 7 replies
-
- motherbord
- amd
-
(and 4 more)
Tagged with:
-
Hi all, here we go again -amd 5900x -asus crosshair viii / WiFi (all was done with latest bios installed first - 5702 or something. Late march 2024) / ekwb waterblock made for the board, covers the vrms and cpu (only mounted with 4 screws but not fun to remove) -4x Corsair vengeance 18@3600, 16gb each (QVL ok) SIDE NOTE do have 4x 16@3200 16g sticks, nighthawks by teamforce. DOCP didn’t work / non qvl so swapped em out quite a while ago - no problems, just saying I have a spare set -asus 4090 w custom waterblock -xfx 6700 xt w custom block -pci 1x to 16x riser, usb 3.0 (unused ATM but plugged in) -quadro 4000 rtx -more radiators than necessary -all the fans are thermaltake something’s, high end/expensive. No RGB, either 2500/3000 rpm peak 120s and 140s -thermal take dc5 pump with 500ml res. -another dc5 pump connected to the drain ports on the top radiator (420mmx60mm) with a seperate 1L res. It’s there for redundancy and to help the primary pump cycle the water, yes that many radiators…. Still have one 140mmx60mm on “standby” waiting to be installed MORE IMPORTANTLY -seasonic 1000w bronze blah blah, ONLY powering the motherboard, cpu (aux cpu too) and 4090. Only powering the molex for the TT pump. I mean face it, I’ll use the best brand to power the most crucial stuff -“gamemax” 1050w bronze powering 8x sata drives, the fan hub, 6700/quadro and molex to pump 2 (“jump started” with lol, one of my many mobo this pin to that pin things) this guys outside the case -DO have a spare psu, seasonic 1500w PLATINUM, Corsair. Had it in a while ago then did math and figured out at 80% peak efficiency (assuming) I had ~1200w to work with. Say the least when the pc was under 100% load it couldn’t sustain and my system would just shut off. Again doing math, 230w max TDP on cpu, 75w per pci, 8x SSDs, fan hub, toss in the video cards…. Yeah. Should mention it’s an EU version (I guess it’s better than US? I dono, wasn’t intentional), have a EU to US 120v power cable. It’s gotta be 12/10 gauge per wire, pos/neg/ground. Easy to find in my cache of pc stuff cause duh. It’s super thick +since I noticed issues with power that’s when I took it out an opted for 2x PSU’s rather than one (thing was large too, had to pull out the aforementioned 140mm radiator to make room) -thermal take TT71 view full/E-atx case, it’s all been taken apart to a skeleton since I did the psu swap. Yes I did swap the Corsair power lines for the appropriate PSUs, pain in the butt -both PSUs are plugged directly into the outlet and each outlets are on seperate breakers (haven’t tripped one… yet) -2x Samsung 980 1tb nvmes, 2023 manufacture date, made in Korea or Vietnam… forget. HAD 2021 variants which thanks to Samsung failed to release a “notification” to update the firmware immediately or your drives will die. Just saying, anyone reading this, yeah… -GPU’s are installed top to bottom in order mentioned (think that’s all, at least what’s relevant?) PROBLEM: Q-code reads 00, can’t do bios flashback via usb cause I noticed they don’t light up on POST. See “what I’ve tried” for more details. WHAT MAY HAVE HAPPENED: day prior I was fiddling with overclocking the CPU. Using HWinfo for duh, cinebench r23/aida64(prime95?)/nicehash(only cpu was enabled) for monitoring and writing down voltages per core, core “order” preferred. Basicallly I was handwriting cinebench scores (5 min stress multi and single), hashrates etc along with the values as reported by HWinfo, voltages/temps and so on. I had NOT been working with the PBO scalar at this point. ALL bios were stock aside from a few minor areas unrelated, SVM and 4g decoding, raid, disabled EDC (whatever for power efficiency/auto downstepping, ERP?) anyway I had gotten to 46x multiplier in main menu, CCX 0/1 to 46 also. Power settings were set to “extreme”, 120% on cpu, 140 (I think) on DRAM. most settings were either enabled or left to auto. If I recall correctly I eventually just went to auto to eliminate variables by the time I got to stressing it I wrote down values, my notes are in the office, I noticed at 4600mhz (cores aren’t set to go faster or slower) the mobo wouldn’t supply more than 1.300v per core, 12 total. At this point cinevench would crash and Nicehash would “blow up” the pc (immediate shut down) so I toned it all down to 43x, ccd0/1 too. Figured I’d be on the safe side doing so, plus I got the best results in my notes. ~20100 on cinebench, .00890 hashrate (again may be inaccurate, notes upstairs) tpu I and II set to “none”, uh that application preference thing to “none” (It has options for Geekbench, cinebench and 2 others) BLCLK at 100.00 from there I had her mining all night, after a few hours I enabled the 3 GPUs. Woke up the next day and yep, all was still good and going. ~1.204v avg on all cores So now I’m like… hmm. Let’s try to increase the voltage one step at a time and keep the everything the same. I have a saved bios profile on a USB of the most stable setup so why not? I forget what the positive increments were but from none I hit “+” and it… offset, increased? Idk whatever it did, by like .00264 something. The minimal amount Saved, restart, windows was stable. Though I did notice the monitor would go blank on login (auto login via registry). The gpu would kick in (after the “dos” spinny image) and I’d see my username which has a profile pic of my dog, blank, dog again pc is thinking, blank, then desktop as usual. Mind you the “blank” was just black screen and basically a quick flicker i don’t recall checking HwInfo, my assumption was my clock speed was too “low” for the additional voltage. I naturally figured no point in stressing it or checking restsrt, bumped up one more (now we’re at + twice, so two “minimal” increments) and went to 4600 to compensate. I mean, 4600 worked fine aside from crashing due to the 1.3v “lock” I noticed the day before. Hence why I stepped it up a tad one last time bam, BSOD loop. Whoopsie. now this part I’m unsure as I don’t remember completely what I did. Back to bios, removed the voltage offset, went down to 43x all over, and I’m pretty sure I adjusted the VRM/delivery from extreme to optimal, put cpu voltage to 120% peak, down’ed the ram to 110%. Basically my mindset was I’m getting too excited and I had best stay in a safe bubble. save/restart ahhhhh darn, q-code of 00 and nothing. Literally no POST, waited watching the q-code LED and no change. Fudge! WHAT HAVE I TRIED? -first logical step, hit the clear CMOS button on the IO panel, the green one. It’s worked in the past just not with a 00 code. No dice -thought for a second, looked at the manual. Hm, there’s a button on the motherboard for safe boot. Ok. Squeezed my finger in there blind and felt it (the little button isn’t by any others by far) and pushed it. Nope -flipped off the power, waited maybe ten seconds then unplugged the PSUs. Waited idk ten minutes, reversed the above and hit the glowing start button. Nothing. Tried safe boot again, nothing -snap, now I’m in a pickle. Removed power sources as noted above and flipped the switch on the motherboard for SLOW MODE. Yes only switch on the bottom, mentioned in manual, yada yada. Power applied again, still 00. Well… let’s reflash the bios via the button and a usb -flipped safe boot off, (done this before) and used a laptop (hp 8760w/32g/3x SSDs/m.2 as boot/datacenter 2022) to setup a usb. First used a 128g drive, went to format and duh, ntfs or exFAT. Nah that won’t work, plus it don’t have a blinky light as an IO indicator. Grabbed my BIOS drive with the saved profiles, shoved the same bios I have on it, root directory and renamed to C8HW.cap (whatever it should be). No go. It’s only a 512mb but I do know the pc is finicky about it and spits a Qcode if I load a profile/save/reboot and leave it plugged in. Eh maybe it’s just the stick, no biggie -busted out my ziplock of flash drives. All varying capacities and brands. One drive was too large (according to manual it says = or less than 2gb) so I just did diskpart and cleaned the volume. Then cleaned the drive. Made a 1g partition at the “start” of the drive and fat32’d it. No dice again 1gb drive, another 512, and a 256mb (haha yep), all done same as above minus the partitioning. Just clean/format fat32 and “whatever”.cap. Nothing read a thread that said sometimes using windows to unzip a file can corrupt a bios file. Winrar is a better option, ok Last attempt, 512mb stick I usually use, same process just with winrar. Nothing Manual says once the button goes blue it’ll blink and stay blue, could take some time but once it isn’t blue anymore it’s done. So pc is still sitting there with the blue light on and stuck in the obvious port labeled for flashback (just being descriptive for sake of a response asking if I used the correct usb port) so far, nothing -prior to the last/current usb, swapped cpu power from the seasonic to the “gamemax”. No go. Figure that was a pointless route since just below the power headers has a red light that stays illuminated if, duh, no power (provided the mobo has power). Power delivery is fine -also removed cpu-opt fan from header. Removed HUB from cpu header and plugged in a spare fan. Still 00 -oh and left the pc with no power for at least 24 hours. Both PSUs off and unplugged. Nothing - even without the “gamemax” PSU connected CONCLUSION? 00 indicates a cpu issue or a motherboard issue. Taking a wild guess tinkering with the bios, trying to reflash it entirely messed it up. Without a UART flasher I can’t do it manually also I might have messed the cpu up. Not sure if it’s plausible cause a MOBO of this… nature has failsafes built in to prevent “blowing it up”. I’ve had similar issues in the past and instead of panicking I just let it sit without power, then all would be fine as mentioned the usb sticks never blink even without hitting the reflash button. So if the mobo don’t detect a cpu, it stops any POST attempts thereafter. Hence, no usb activity. Sure my crap via usb gets power, gaming mat and junk. Otherwise nothing i dont have a spare cpu laying around to try out. Kinda wish I did! Prior to all this mess I was playing Horizon Forbidden West CE on my G9 with full settings on. Blah! so now ya know the story. What to try first? Only thing I haven’t done is take out all the GPUs or swap the ram. Highly doubt it would matter, no cpu? POST wont check anything beyond that keep in mind the board DOES have “pins” to check voltages with a voltometer. Meh, maybe try that? any, any ideas would be a great help. (Whining) I wanna play my games! BTW as mentioned I have a usb with saved profiles on it. I been backing em up since I finished the build. If anybody has a way of viewing them (dono how, are they saved in text?) maybe that would provide best course of action?
- 8 replies
-
- motherboard
- amd
-
(and 3 more)
Tagged with:
-
Just replaced my 3070 with 7900 XT. I used DDU to clean up previous drivers and looked for location where sharers caches might have been to clean them up. So far, installation went flawlessly, I did a quick test on Resident Evil 2 Remake and Ready or Not, both working well (outside of RoN love for shader stutters, but they are expected and quickly disappeared) Before the switch I did some benchmarking with default configuration and my custom curve, using MSI Afterburner, so would be able to compare effects on the switch. Anyway I definitely will be messting around with OC/UV so, it make sense to gather information and maybe make a report post in a couple of weeks. So, the question is, what I can use to measure average FPS and 1% lows? There seems to be some statistic in Adrenaline driver utility, but I'm not sure if I can use it for 1% lows and how. Also would be happy to learn any tips about AMD cards in general.
-
Hi there, I was just recently browsing alphacool's website and noticed that I could pick up a waterblock for about $80 usd. Although on the website it only lists the XFX Merc 319 RX 6900 XT card as being compatible. I was just curious if there is anyone out there with experience watercooling AMD cards and could let me know if they'd be compatible. Here's the link to the waterblock: https://shop.alphacool.com/en/shop/gpu-water-cooling/amd/11956-eisblock-aurora-acryl-gpx-a-radeon-rx-6800xt/6900xt-merc-319-with-backplate?currency=3 Also, would anybody who has experience watercooling high end graphics cards be able to give advice on a good Radiator / PUMP combo to fit into a Seasonic Syncro Q704 case (it's inverted ATX and i want to keep the 3.5" drive bay). I already have a 280mm AiO Bequiet cooler in the front, and I was hoping to go with a 360mm copper rad in the top to the GPU block? Please let me know best cooling advice. SYNCRO-Q704-PSU.pdf 11956_Alphacool_Eisblock_Aurora_Acryl_GPX-A_Radeon_RX_6800XT-6900XT_MERC_319_with_Backplate_Manual.pdf ENG_11956_Alphacool_Eisblock_Aurora_Acryl_GPX-A_Radeon_RX_6800XT-6900XT_MERC_319_with_Backplate_datasheet.pdf
- 3 replies
-
- watercooling
- graphics card
-
(and 4 more)
Tagged with:
-
Which Gpu is best to go for? They is only £30 between them, I know the rx 6750 XT is older and the rx 7600 xt has 16gbs of vram vs the 12gbs on the rx 6750 xt both are XFX cards. My motherboard has only pcie 3 slots.
-
For the past 2-3 months I've had an issue where my CPU will randomly drop to 0.4 GHz even though it's nowhere near overheating and is on full battery. I've tried and tried again to fix the issue but cannot find any solutions. Laptop Specs: Model Name: Lenovo Ideapd Gaming 3 15ACH6 - Type 82K2 AMD Ryzen 5600H 16 GB RAM @ 3200Mhz Nvidia Geforce 1650 Max Q Normally: In Games: The max CPU temp that Lenovo has set is 80 degrees. The issue only seems to happening in games, I have no idea why. I've seen intel users have the exact same problems and solutions for those included ThrottleStop which isn't available for AMD CPUs. I've tried resetting Windows, installing Windows from a fresh ISO, updating my BIOS, reinstalling my graphics drivers and nothing has worked.
-
I have a AMD Ryzen 5 2400g and i noticed that it only uses 20w of the 65w TDP and my GPU (GTX 1650) only uses 56w of the 75w TDP. i don't have any idea why, my power supply is 400w so it should provide de wattage. both GPU and CPU are power limited. btw my bios is stock.
-
So I've basically already decided on the 6800 but I wanted to hear what some of you guys think and if maybe I should go for the 6800xt instead and or if the 6700XT and 6800 are so comparable it that I should go with the cheaper one. As far as I know the 6800 is better than the 6700XT by quite a bit.
-
Hello everyone, I have a Phillips 499P9 32:9 5120x1440p monitor. For gaming I like to scale it down to 2560x1440p in the middle of the monitor with black space on the sides. Up until now I had a GTX1070 and if there was a problem with the game scaling properly, I could go to the OSD Menu of the monitor and force an aspect ratio there. I recently upgraded to XFX Swift RX6800 and the aspect ratio option in the monitor does not work. The menu item is still there but it is not active and cannot be selected. This kinda sucks because I bought the GPU for 1440p gaming and if the game scaling does not work properly (e.g. like in Witcher 3) I am forced to use the whole monitor, requiring the GPU to push something like 80% of 4k. I tried various combinations (both global and per-game) of scaling settings in the AMD adrenaline app but they seem to have no effect at all. Can anyone here advise, whether I should look for some specific setting that would give the aspect ratio control back to the monitor? I'm starting to think that this whole foray to AMD was an error and that I should be a man and go back to nvidia. Thank you.
- 13 replies