HCP

I have been watching the movie and LED sequences for a month, frame by frame i wrote down wich LED was on when, and with wich others. i have a pretty good feeling about the pattern from the movie. From this i have made "clusters" that contain 200-400 LED´s each, they are placed on a programmable LED board, its basically ON and OFF for different clusters for different times. Here´s how it works. RED - cluster 1 BLUE - cluster 2 GREEN - cluster 3 YELLOW - cluster 4 And so on. (colors are just identifiers for the different clusters, not the LED color) The clusters contains both yellow and red LED´s and have their own specific location. Each (except for two, one always lit, one always off) clusters get lights on for X milliseconds, X is different for each clusters of LED´s and all this together gives the nice blinking and lightshow on the WOPR This work, to find what color goes where, wich led is lit togheter wich others, their speed and location and so on took me a month. But, after i tried to just do some random blinking, it didnt look right, so i got stuck in perfection. I want my WOPR to be a small version of the WOPR in the movie, not a random christmas light flash-thingy. LED positions/groups on the panels are 99% identical with the original, when AT & T made a replica, they didnt care about that detail, i will though :) I have about 35 of the pics below, the example shows about 1/8 of the panel, each containing the ~1400 leds in different modes. + a layout for what color goes where.

I had some brain damage and heart stopps troughout the soldering :) And i have alot left to do on the electronics too.

Current state of the case. Testing the led-panel, i wish i made the cutout bigger... See if i make that change later or if i just go with it. Almost time for some Tic Tac Toe

Current status of the case, didnt want to add color just for a photo so you have to imagine the correct color on it ;) Working on led panels and the bottom of the case now, trying to fit a 120 or 140mm radiator for a cpu only loop, we´ll se if it fits.

New plexiglass roof on! Took me 10 minutes to sand the roof and prime it with perfect result :) But i found one more fault, it was too wide. Cut away one inch from it. When i was done, i remembered that all other parts now is to wide too... Two part WOPR Now this is the last changes, i dont have time for more errors :)

Thanks guys :) Im doing some led soldering right now, but will build more on the case tomorrow (later today for you US people) and put up some more pics :)

Hammertime! *Smack* Got tired of the roof, the plastic i used was to soft that i sagged when sanded and after 10 runs with putty/filler i still didnt have a flat roof. And all wet sanding made the wood increase in thickness, had it in the oven for a couple of hours now to dry it up. Going to replace the roof with 4mm acrylic, and i hope i can get done with the casing now, all other parts just laying around and wait

Made some more panels for the USB headers. The USB headers goes here, behind the "tower" at the red arrow. And a colourtest to see how it looks :) Soon gettin´ there, much time goes to the LED´s and not so much for the case right now.

I tried different solutions, cut open pipe, sanding in a angle and other stuff, nothing really good. Now i found this, and whats im going with. Not 100% identical with the original but good enough. Some putty and sanding, and after that i will run a router bit making the edge rounded i think will do the job. Now the fun work starts Time to figure out where the LED´s go, from what cluster and what colour, my charts are pretty easy to follor, but with 1400 LED´s i think i will have a brain freeze or two Trying the leds in the panels before paint. Noticed the yellow needs to be changed to amber, too much yellow BTW, its 3mm led´s A little mockup before more sanding and gluing The bottom of the case is not there, couldnt get all parts stand by themself and take a photo at the same time To be continued

My first order of LED´s, 400 of them... After some counting, im gonna need 1000 more Been sanding and sanding to get straight edges and round corners. The top parts getting good now, and ready for gluing. But i think i leave some parts to the last step so i dont get any problems adding the electronics Adding a pic of the real deal, from almost the same angle. My biggest concern with the WOPR was the doors, they are countersunk and have rounded edges. Take a look

[Reserved for final pictures]

Some of you have probably already seen this on other forums. From the movie Wargames i bring you WOPR. Love this movie, and love the WOPR. Started planning this a half year ago, tried to contact people in the US having some info about the real model to get measurements and color codes etc. Got some good info and now its time to get it rollin´. I found some sketchup model of the WOPR, but the measurements were totally off, and some parts were to big/small, wrong place and so on. Took me almost a month to get all details right in the sketchup model. Used the movie of course and all pics i could found on the net. Also got some emailed to me from a previous worker who made the original back in the 80´s. Size of the case will be about 19x8x6", perfect to house a ITX motherboard with a 3870K AMD, i have a Intel 330 128GB SSD somewhere and a Corsair H60 that will to the job perfect I do not play games, so the graphic power is not a issue for me. If someone dont know what the WOPR is. War Operation Plan Response Now from the start, it may look a bit messy until i get all the parts and stuff together The roof of the WOPR. Rounded wood stripes to get rounded parts without sanding me to death Adding some round corners, Using 20mm pipe to get perfect corners. The three panels for the LED´s Sketchup model, got them CNC cut to get perfect holes everywhere