Mr.Dingle

Yay

Chinesium 32mm PWK Keihein carby.

Nyoom.

Yeah , servo , cable or vacuum operated . Should be fun once de-restricted , maybe throw a 32mm carby on it , with a boyseen rid kit ... and a different pipe to suit your riding style ...

Powervalve should follow throttle opening on those models , later models got the RPM or vacuum operated power valves . There are lots of info on line how to check and adjust them , but basically it should stay closed till 5-6k RPM then open up to full position and stay open at above 8k RPM . If its lacking a lot of power down low , it could need some adjusting . Really not alot can go wrong on those engines , if Honda knows how to make anything at all , its their 2strokes . Other stuff includes opening up the engine , to inspect the bore for signs of past seizures and general engine health . Some stuff to watch out for is wear on the exhaust side of the cylinder , it should not exhibit any more wear than the transfer port sides , otherwise it was ran too lean (more heat = piston + rings expand more and since heat transfer is un-even between the two sides , exhaust side tends to wear out quicker especially around the bridge area ) Since you said it behaves ok , a basic plug and compression test should tell you all you need to know .

2 Stroke, automatic thumbs up . Check the power valve , as it can be a pain if its not synchronised properly with the throttle . Good thing to check is the plug should be golden brown ideally ( mixture wise ) , and if you do remove the exhaust restriction you will have to jet up a few sizes .

Maybe he cant reach the floor :thonk:

Maniac

Wont allow embedding sadly.. https://www.youtube.com/watch?v=-xX2tcw9uRg&t=1s

Fair enough ... Dual weber and stroker kit you know you want it

Weber conversion ?

Wood chipper .. to make stuff more space efficient

Thats not what a thermocouple does . One relies on physical properties of the material used ( mercury or alcohol ) to accurately represent the change in temperature via change of volume which you then read off a scale , while the other uses the thermo-electric effect which you can then read off of a multimeter / voltmeter or do an analog to digital conversion to use in displays and what not ... From inexpensive K-types which have a very wide range of measurement but are less precise to something like Type-B which have a narrower range of measurement but have +/- .5% error.

Massive. Free cookie to anyone hwo guesstimates the max. allowed compressor speed (RPM)

Clones are identical in spec to the GX series , minor differences between the Predator ( harbor freight brand ? ) and Chondas to exist , but 99% parts are interchangable.

Minibike . Hopefully , the engine will be able to spool it enough to get .5bar out of it ( GX200 Clone )

A tiny tuvbo.

EBC Green stuff pads , and a chinesium 26mm Mikuni carburetor.

100cc of evil

Whats special about a 1,2 Clio ? Swap i presume

Scorpio with the Cosworth V6 was on my to go list some time ago ...