adnartion

ohh well will just have to use a rbg header on the board then and use 2 different software's  

i just bought a asus gt501 case. 

i cant seem to figure out if i can control the RGB on the included fans with a lighting node from corsair or not.

it was my network card :/ got more connection problems so just went a bought one. after that everything has worked fine :)

Sounds good, was a little worried.

he somehow conviced me that my psu is to small and thats why i am not getting 100% gpu usage in heavy games.

well guess i have to figure out why now then 

Hey guys

Not really troubleshooting but a question

just wondering if my PSU is large enough?

A friend of mine is telling me that i would need about 900w is he right or am i in the safe sone?

my computer components are:

Cpu i9-9900k 5GHz 1,3v

Motherboard ASUS ROG STRIX Z390-F GAMING, S-1151

Ram: 32GB of corsair vengeance 3000MHz

Watercooler: corsair H110i Gt hydro series

GPU: Gainward geforce RTX 2080 triple fan (overclocked)

Storage: 1x 120gb ssd    1xSamsung 860 QVO 2TB SSD 1xSamsung 970 EVO 500GB m.2 3x3TB seagate sshd

Netwoking card :Asus PCE-AC88 AC3100 PCI-E Adapter

Fans 1x 120mm 2X140mm 3x~250mm all of the have LEDS

LEDS: 3 strips total

Fan controller: sentry mix 2 NZXT

and my PSU is a Corsair AX760 80 Plus Platinum

it is not a chrome error since the error also happens in edge, firefox and opera too

it is very specific to my computer, tested 3 others now none of them have this problem. i have also tried all the fixes above and still the same.

if i cant get this working very soon i am going to do a fresh windows install... 

16 hours ago, mynameisjuan said:

Thats all wireless. There is no tweaking you can do to improve your speeds. Run a cable or test your luck with Ethernet over power adapters. 

 

With wireless you will never get 300/300 on a 300/300 connection, 250 absolute best case scenario. 

i tried my luck with Ethernet over power today on no luck it seems. does not work at all since the power in this room is on a different circuit than the room the router is placed in

Soooo i figured out that flushing my dns makes it work for some time... but only for like 20 minutes. I dont wanna have to constantly flush my dns. So if anyone know what can cause this i would be very happy

so back to square one i guess

11 minutes ago, PrinceNorris said:

Cookies?

i forgot to edit tread but it actually stopped working in incognito to it just worked for a much longer time the first time i tried it...

i have tried removing cookies i even did a winows recovery to get to a point where i know it was working and that didnt fix it

ok i got it working in incognito mode now... what could make it work in incognito mode?

1 minute ago, PrinceNorris said:

Try going to cmd > type in ipconfig /flushdns

And just in case, are you using any VPN?

i have tried this multiple times and i does not work. i don`t use a VPN i have even tried installing one and its the same problem with or without the VPN active

Hi, i just got fiber installed and i quickly realized that the standard router didnt have the range. 

so i changed it for a archer c7 ac1750 v2 anything spesial i should to in the router to optimize it?

and i need some help getting optimal speed for my computer. you see the modem and router is installed on the other side of the house and i only get about 100 Mbps down and 135 Mbps up out if it when it should be 300/300. i get the speed if i plug in a cable, but i cant use a cable since i have multiple doors and a kitchen and living room in between me and the router. so anything i can do to help me get better speed? the wireless connection icon in windows have all bars filled so you would think the connection was good.

can some one help me figure out how i can get the twitch videos working on my computer again?

i can only watch about 5 minutes at most of a video before i get an error "there was a network error. please try again. (Error #2000)"

i can still watch streams live with no problems and everything else works properly. 

i just cant watch past bradcasts on twitch

i know it is a local problem because i have my laptop next to me and it plays the videos just fine.

so it is a problem with my pc not the network as far as i can tell.

i downloaded the twitch app on the pc and even that fucks up so there is something very wierd about this problem i dont even know where to start...

so i tried to create a hotspot on my pc and share with the laptop and the problem spread to the laptop. seriously this got to be the wierdest problem i have ever had

can some one help me figure out how i can get the twitch videos working on my computer again?

i can only watch about 5 minutes at most of a video before i get an error "there was a network error. please try again. (Error #2000)"

i can still watch streams live with no problems and everything else works properly. 

i just cant watch past bradcasts on twitch

i know it is a local problem because i have my laptop next to me and it plays the videos just fine.

so it is a problem with my pc not the network as far as i can tell.

EDIT: i downloaded the twitch app on the pc and even that fucks up so there is something very wierd about this problem i dont even know where to start...

more information. i have been testing some more and the problem only seem to happen when i switch to theatre mode of fullscreen. if i watch it in "normal" mode it works fine.... is this some kind of flash problem then?

nope not fully fixed. it workd for a bit longer each time but i still get the error

Hey, i know this might be a bit wierd thing to need help for but i really cant figure this out.

I am trying to watch vods on twitch.tv since i sleep or work when the streamer is online. But in the last couple of days i have not been able to do so on my gaming rig.

i always get a error. "there was a networking error (error 2000) i can watch for 1-10 minutes at a time before it appears.

everything else on my pc works fine, i can play games and watch other streamers live

but vods wont work ,it is a so stupidly annoying thing.

and yes i have tried about 10 diffrent vods. i can have my laptop and pc next to eachother and the laptop will play it fine but the pc will get a error. 

dont know what to try to fix this. 

i have tried a whole bunch of stuff i even rebooted my router to factory settings.

well its fixed now. so lucky that i was able to borrow another mac from a friend or we would have been screwed

she did the cmd+f command when rebooting and did it via the OS-X Tool

When we try to re install it with the OS-X tool it says objective not awailable. so now i am stuck trying to restore a 10.10.3 version on a usb drive with another mac. but it fails the scan. that error message says objective busy

all right i have now been able to borrow another mac from a friend.

this mac also has yosemite 10.10. now how to i obtain the files i need and how do i make a bootable usb?

well i dont have another mac. and i dont think she have ever downloaded it before. sooooo are we screwed then?

Hello, yesterday my girlfriend desided that se wantet to restart her mac. 

so she deleted the os. before reading what she was actually supposed to do.

and now when we try to reinstall the os it says objective not awailable. 

a quick google search told me that yosemite 10.10. is not awailable anymore. 

so now i ask. what can i do to install a OS on the mac again? 

i have understod that i have to make a bootable usb for the mac.

i have a windows 10 pc to do this with. but i cant figure out how too do it. 

or how to obtain the yosemite install files...

its all good. i gave it upp figured pretty much the same as you eighter it works or it wont work. and in my case it didnt

i just updated the bios from  P01-A1 to  P01-A2. it still wont boot when i put in the 780. i have read a lot of forums and i see that some people can just install a new card and it will work instantly. other people who cant get the their cards to work seem to never get it working. does anyone have an idea why?

i have turned off secure boot btw. and this bios is very plain and simple so there is no option to enable Launch CSM,