Jump to content

itsFreeriide

Member
  • Posts

    30
  • Joined

  • Last visited

Everything posted by itsFreeriide

  1. Anyone here have a k65 rgb ES? Mine is refusing to update firmware, which means I can't do anything with the RGB lighting...
  2. Well somehow I got an Asus R9 290x in good condition for $150 on ebay -- wish me luck it isn't DOA
  3. I'm in the market for a new GPU... I've looked at some benchmarks and the 380 appears to beat the 960 in most tests, and both are similarly priced and vram capacity. Or, I could buy a used 780 for $220-250, but get worse support for DX12 and the chance of getting a DOA card, or I could get a used R9 290x.... Recommendations??
  4. In all fairness, the 390x is a rebranded 290x just turned up some. AMD is putting all of their developement into the Fiji XT gpu that will be in the Fury. I don't support what they're doing, but it will drive nvidia prices down some, just like the 290 did to the 780 last generation
  5. To all those wanting to see the video, it was re-uploaded by YouTube user Aa Aaa https://www.youtube.com/watch?v=b3QuwujjIp8
  6. I would replace my 4930k and x79 deluxe for this 5820k and a gigabyte x99 motherboard. This is my workstation FYI not my personal gaming rig.
  7. If you have the ability, try and reseat the cards (move the PCIe configuration) and see what happens. You could also remove a card an see what the GPU usage is for each one.
  8. This may sound quite noobie, but I would contact Microsoft and tell them your key, and your situation and they might be able to help.
  9. I meant it dips under 30fps in intensive areas
  10. 8gb 1866 Kingston HyperX, gigabyte F2A88X-D3H, Source 210 case, 24 inch 1080p 60Hz monitor, EVGA 500b 500w power supply
  11. So I have a system at home that houses an AMD Athlon x4 760k, a GTX 760 and it lags on LoL. Where should I upgrade? It's non overclocked and I have $250 to upgrade it.
  12. So I have an MSI Z97 Gaming 9 A.C. and all of my drivers are up to date, however when I try to plug my Microsoft Xbox 360 wired controller to my front panel usb 3.0/2.0 it shows up as 'device not recognized" My PC build specs are in my signature for further information.
  13. I'm sorry to inform you but AT&T is on the GSM radio band, and your HTC One is a CDMA radio band (Verizon, Sprint). The only way to use a GSM network on that phone is to physically remove the CDMA radio and install a GSM radio which also happens to be illegal.
  14. If you are using a "nightly" build of cm11 try and install a stable version of cm10 or look for a stable cm11 build for your device
  15. If none of these solution work, you could try and reinstall windows
  16. I'm using 14.4 because it works and 14.9/14.10 didn't work for me.
  17. Have you tried and looking into your core clock and see if its throttling? If the core clock dips heavily when you open a game then check the GPU cooler to see if the screws are tight, and remove it to see the thermal compound and consider replacing it.
  18. Try and reinstall your motherboard's USB 3.0/2.0 drivers, or see if there is an update for your chipset drivers, or USB drivers. This happened to me when I tried to use a controller on my front panel USB ports.
  19. Thanks guys!! My favorite product is probably the Edge power supply because it is very quiet, affordable, and rather good looking!
×