-
Posts
145 -
Joined
-
Last visited
Reputation Activity
-
jeffrey_rodriguez got a reaction from SeerreuS in The Water Cooling Gallery
Specs are:
Intel i5 4460
Asus z97m-plus
Kingston 120gb ssdnow
Kingston 8gb hyper x
Sapphire R9-290
Fractal Design Arc Mini R2
Seasonic 750X series
EK XTX 360
EK Supremacy HF
Ek r9 290 waterblock
EK dcp 4.0
EK res
five Fractal Design fans
-
jeffrey_rodriguez got a reaction from Allshevski in The Water Cooling Gallery
Specs are:
Intel i5 4460
Asus z97m-plus
Kingston 120gb ssdnow
Kingston 8gb hyper x
Sapphire R9-290
Fractal Design Arc Mini R2
Seasonic 750X series
EK XTX 360
EK Supremacy HF
Ek r9 290 waterblock
EK dcp 4.0
EK res
five Fractal Design fans
-
jeffrey_rodriguez got a reaction from alpenwasser in Project Cheappy V2
It's been a while since I posted my last build,, the original project cheappy was epic, but technology and games kept evolving and so I came up with a new build,, Hope you guys enjoy this..
Project Cheappy V2
-
jeffrey_rodriguez got a reaction from alpenwasser in The Water Cooling Gallery
Specs are:
Intel i5 4460
Asus z97m-plus
Kingston 120gb ssdnow
Kingston 8gb hyper x
Sapphire R9-290
Fractal Design Arc Mini R2
Seasonic 750X series
EK XTX 360
EK Supremacy HF
Ek r9 290 waterblock
EK dcp 4.0
EK res
five Fractal Design fans
-
jeffrey_rodriguez got a reaction from Jumper118 in The Water Cooling Gallery
Specs are:
Intel i5 4460
Asus z97m-plus
Kingston 120gb ssdnow
Kingston 8gb hyper x
Sapphire R9-290
Fractal Design Arc Mini R2
Seasonic 750X series
EK XTX 360
EK Supremacy HF
Ek r9 290 waterblock
EK dcp 4.0
EK res
five Fractal Design fans
-
jeffrey_rodriguez got a reaction from 3teng in The Water Cooling Gallery
Specs are:
Intel i5 4460
Asus z97m-plus
Kingston 120gb ssdnow
Kingston 8gb hyper x
Sapphire R9-290
Fractal Design Arc Mini R2
Seasonic 750X series
EK XTX 360
EK Supremacy HF
Ek r9 290 waterblock
EK dcp 4.0
EK res
five Fractal Design fans
-
jeffrey_rodriguez got a reaction from Rabald in No video output R9 390X
I would think that ,,to have an upgrade of processor and motherboard will be worth it for the 390x
-
jeffrey_rodriguez reacted to Rabald in No video output R9 390X
What do you suggest then? New LGA 1155 motherboard ( they are starting really hard to find in my country) or i5 4690 and new motherboard?
-
jeffrey_rodriguez reacted to Sauron in help on changing r9-290 bios
Does the 290x bios work at 1ghz? If so, it should perform better than a slightly overclocked 290, so you might as well keep that.
-
jeffrey_rodriguez reacted to SkilledRebuilds in help on changing r9-290 bios
Put your specific model number in here.
There are a few models from Sapphire no doubt.
I would have normally said switch to the other #1bios, back it up, put it on the other bios #2 profile.
Then go to techpowerup bios database, find YOUR card model, and its bios.
If you have a dual-bios card (most are) then you will never brick it.
But watch more than one of the tutorials on youtube of people doing theirs,.. get a better idea of what to do with multiple sources.
It's not that hard, You could do it in Windows or DOS, either is fine, I've not screwed up anything doing it windows all these years.
Sapphire prob has a tool to do it, just open that program, click update and FIND your downloaded/saved bios and select it.
-
jeffrey_rodriguez got a reaction from SkilledRebuilds in help on changing r9-290 bios
hi guys,,
recently i bought a used sapphire r9-290,, one of the bios setting was flashed to r9-290x bios,, I am hoping that somehow i could return it to its original bios,, on the first setting (near the IO area) i could not overclock the card,,on the second setting which i believe is the uber mode was flashed,, set to 1ghz,, adding as much as MHz ,the GPU will give me a blue screen or absolute lag while gaming
can someone help me to bring/teach me how to flash the card to its original bios? or at least give me a link where I could flash my gpu,, i have downloaded a bios but I'm afraid to use the USB method,, I'm afraid to brick my card, I have been saving money for too long just to break it.
thanks in advance guys
-
jeffrey_rodriguez reacted to BellySyrup in Project Cheappy V2
That rad leaning up against the wall... all I could think of was
-
jeffrey_rodriguez reacted to Maxwit44 in wishing for your inputs
Firstly, very slick build there. Very nice!!
Whats the room temp when your gaming or what ever? If its in the mid teens to early 20 degrees C, I'd leave it alone. if its higher, then its doing a great job.
Honestly, I would go adjusting the fan curve before adding to a hardline setup.
Just my opinion.
-
jeffrey_rodriguez reacted to The-youri in Project Cheappy V2
Looking great !
can you make a part list for the custom loop?
because im also planning to do a custom loop and we have the same kind of hardware
thnx
-
-
jeffrey_rodriguez reacted to ManOfGold93 in Project Cheappy V2
What did you use on the tubing? It came out really nicely, well done!
-
jeffrey_rodriguez reacted to Watercooler970 in Project Cheappy V2
This kind of gives me pressure on my own upcoming custom loop!
And btw, the water cooled gpu alone gives a lot of advantage in terms of overclocking.
-
jeffrey_rodriguez got a reaction from Mattias Edeslatt in The Water Cooling Gallery
Specs are:
Intel i5 4460
Asus z97m-plus
Kingston 120gb ssdnow
Kingston 8gb hyper x
Sapphire R9-290
Fractal Design Arc Mini R2
Seasonic 750X series
EK XTX 360
EK Supremacy HF
Ek r9 290 waterblock
EK dcp 4.0
EK res
five Fractal Design fans
-
jeffrey_rodriguez reacted to Bananasplit_00 in Project Cheappy V2
this is truly awsome and that motherboard is the same color as my shit one so i cand disagree
-
jeffrey_rodriguez reacted to Lotus in Project Cheappy V2
How did you afford custom water blocks for both the CPU and GPU then? Those are super expensive, and result in no benefit for the CPU since it's locked.
-
jeffrey_rodriguez reacted to Lotus in Project Cheappy V2
I do not understand why you would get a CPU that can't be overclocked in a custom loop. It doesn't make sense to me.
-
jeffrey_rodriguez reacted to Watercooler970 in Project Cheappy V2
Great job man! Super sleek and nice cpu block!
Enjoy your machine!
-
jeffrey_rodriguez reacted to Zyphron in wishing for your inputs
now im not too Up and up on AMD GPU temps but your CPU temps look about right. Perhaps there is a seating issue with the GPU? or like others have said this could be an issue with the block perhaps pull out the manual? and see if its a 1 way Directional Flow block? I Know some EK blocks are one way Flow.
-
jeffrey_rodriguez reacted to f5alcon in wishing for your inputs
You can get it lower, but it depends on your priorities, looks vs temps/noise.
-
jeffrey_rodriguez reacted to rcarlos243 in wishing for your inputs
First of all what is the gpu waterblock you are using?
You might be getting limited by the block performance itself.
From the looks of it you are using Alphacool NexXxos Monsta, that radiator likes a high static pressure high rpm fans like gentle typhoons ap15.
Also what pump are you using? You should at least get 1GPM flow rate so you get decent performance.