SquaredLogic

You need to tell us motherboard model, otherwhise we can't help you because every motherboard is diffirent.

Also general rule is not to update BIOS unless your computer isn't working properly or new BIOS has support for some hardware that old BIOS doesn't have.

Try changing RAM slot

If those that aren't working 3.0 USB ports maybe you need to install drivers for them (I know is sounds strange but I needed).

Hello, few days back I upgraded to Winodows 10 Pro (clean install). After the instalation I wanted "links" like Documents, Pictures and Downloads to be shown right above the Power menu in Start. So I went to Personalization>Start>Choose maps that will be shown in Start menu (or something like that) and than I choosen maps I wanted. And now when I try to open them by clicking on it, dialog window pops and says "Windows searches Downloads. To locate the file yourself, press Browse. (May be not like that I translated from Croatian). Is there any way to fix it?

Just a little update just bougt pots and connected them by picture 3, it didn' t want to spin fan. Than I tryed picture 1 and it works like a charm.

Why would I need 2 amp pot for 0,16 apm fan? I will use 1 pot per vent.

So, you wanna say one of 2 last photos I posted will do (besides yellow wire)?

Well, I'm starting project of silencing my fans, for that job I decided to use potentiometers, and I have one little problem with them. While I was searching round Internet I found out people wire them on few diffirent ways but I don't know whats right. Down below I posted 4 photos, so if someone can look 'em and tell me whats right way for connecting.

Yeah, you're probbaby right. So, what do you think will 1kOhm or 5 kOhm do it's job?

So you want to say that neverminds what i choose untill its not stupidly high? Like 10kOhm?

So, I want to make fan contoller with switches and potenciometers. And I got to the problem and this is what potenciometer to use? My fans are 12V 0.16A 120mm, I wouldn't like to my fans go below 4-5V. I also found one site where says that I need 100 Ohm pot. for this, which is by me a little to low. So can someone claim that ? Site link : http://www.sevenforums.com/tutorials/87295-fan-speed-controller-build-your-own.html

My concern is that I may burn LED's

First thanks for reply. Secodly I would like to connect LED's above the switch. So + from switch (PSU) to + on LED and - on switch to - on LED.

Hello, I have one simple quiestion and that is are amps important when connecting LEDs? I want to connect switches that will turn on or off fans in my case, so when fans are on LEDs should light on. Power should go trought 4 pin molex connector.

Today, I installed TunnelBear run it and uninstall it. After that I get these erroes every time i boot my PC: -->The name "MARCEL-PC :20" could not be registered on the interface with IP address 192.168.5.100. The computer with the IP address 192.168.5.103 did not allow the name to be claimed by this computer. -->The name "MARCEL-PC :0" could not be registered on the interface with IP address 192.168.5.100. The computer with the IP address 192.168.5.103 did not allow the name to be claimed by this computer. -->The content source <csc://{S-1-5-21-656708487-2739352593-3952458321-1000}/> cannot be accessed. Context: Application, SystemIndex Catalog Details: The URL was already processed during this update. If you received this message while processing alerts, then the alerts are redundant, or else Modify should be used instead of Add. (HRESULT : 0x80040d0d) (0x80040d0d) -->The server could not bind to the transport \Device\NetBT_Tcpip_{C265D072-CAF3-4D46-AF5B-0F749166AD67} because another computer on the network has the same name. The server could not start. How can I fix these errors ?

Hello, I have two errors which I found in Event Viewer which are : Service running AppEx Networks Accelerator LWF unable because System can't find specified field - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" /> <EventID Qualifiers="49152">7000</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2014-09-24T18:05:12.817628500Z" /> <EventRecordID>32364</EventRecordID> <Correlation /> <Execution ProcessID="700" ThreadID="704" /> <Channel>System</Channel> <Computer>Marcel-PC</Computer> <Security /> </System> - <EventData> <Data Name="param1">AppEx Networks Accelerator LWF</Data> <Data Name="param2">%%2</Data> </EventData> </Event> And second is: Failed to load the following drivers to start with selecting the device driver or a system startup: cdrom I think that is important that IDON'T have CD rom Log Name: System Source: Service Control Manager Date: 24.9.2014. 20:05:16 Event ID: 7026 Task Category: None Level: Error Keywords: Classic User: N/A Computer: Marcel-PC Description: Nije uspjelo učitavanje sljedećih upravljačkih programa za pokretanje s odabirom pogonskog uređaja ili sistemsko pokretanje: cdrom Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" /> <EventID Qualifiers="49152">7026</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2014-09-24T18:05:16.717635300Z" /> <EventRecordID>32395</EventRecordID> <Correlation /> <Execution ProcessID="700" ThreadID="704" /> <Channel>System</Channel> <Computer>Marcel-PC</Computer> <Security /> </System> <EventData> <Data Name="param1"> cdrom</Data> </EventData> </Event> So how can I fix this ?

Hello, can you halp me about choosing my new GPU. Two betwen I can't decide are: -Sapphire R7 260X 2GB GDDR5 -Sapphire R7 250X 1GB GDDR5 VAPOR-X OC I want them for games like ETS2, Far Cry 3, BF3.

Anybody

Today I unistalled Hotspot Shield and after restart I didn't be able to connect to the internet from Firefox and IE 11. I went to Firefox settings>Advanced>Network>and changed use system proxy settings to no proxy. Then I go to Comand Prompt>Internet options>Connections>LAN Settings>and disabled everything connected to proxy settings. I there anything I could do to completly disable proxy or I did all ?

MBO is Asrock FM2A75 PRO4+ and it have dual channel opertion

Recently I built my PC and now and I want to add more RAM, so my question is will iI be able use dual channel memory. Problem is here I bought one stick 4GB Kingston HyperX fury 1600 MHz and I want to add exact same stick ( 4 GB Kingston HyperX fury 1600 MHz ) will that work or not?

Hello, I have one little problem and that is when I put Dysplay resolution on 1920×1080 text gets really small ( http://imgur.com/lb7vyU7 ) so I can't read very well from it. If I put it on 1366×768 than text gets bigger but blury ( http://imgur.com/jcFlrVl ). All my HW is listed on my profile. So is there any help or I need to stay on 1366×768 ?

Thanks

And what processor would you choose : Athlon II X4 750K Athlon II X4 740 Athlon II X4 760K