DeuS1

Yeah, i actually wanted to use as little fittings as possible to begin with, but after some loop try outs
i decided to use as many as possible instead, because of how beautifull they look ..
and i went with the silver fittings instead of matt black, because there's allready so much black/blue going on in the case it self,
so i wanted the fittings to match the nickel blocks instead .. 
 
i actually thought about making a matt black acrylic plate to go over the i/o, 
but again, the nickel look fits the fittings and blocks very neetly i think  

!!!! - FINAL SHOTS - !!!!


 

IT'S DONE !! The Parvum|Beast is finally finished... 

Sorry it took me so long to finish, but with 100 hour work weeks on my regular job, it got kindda hard to find the time to work on the Beast..
BUT time to share the final images with you guys..
I am very happy with this build, put a lot of attention to details into this one, and also a lot of blood and tears ! .. 
 
I will make the sleeving video, EK Frosted Block polishing video, and some other stuff tomorrow, and hopefully get it out to you guys before thursday.. 
 
Thanks for all of you who have followed this build, 
and a BIG BIG BIG Thanks to:
Coolerkit.com - EKWB.com - Mainframecustom.com
For their support and help making this build more than just a dream ! <3 .. 
 
Now THE IMAGES !!
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
Again thanks for following this build guys, and thanks for the humongus support on my facebook page "BeckModZ - Liquid Designs" 
I can't believe that this build gave me over 2000 followers on my facebookpage .. THANKS GUYS!!! ..  

Feel Free to share your thoughts on this build, would love some feedback !  

Done Routing cables, Trying out blue Mesh


 

So i just finished the cable routing ! im pretty happy with the result when you think of how little room there actually was for this,

cause of the size of the AX1200i .. 
Also, i have been trying to figure out what to do for rad covers to be shown on the outside.. 
And i found some mesh laing around, spray painted it blue, and tried to put it loose on top of the rads.. 
Actually think it's lokking kindda cool, color matches okay too now to find a more permanent solution with it 
 
What do you think guys ? looks pretty good right ?   
 
Also still trying to figure out what do do with the PSU to make it blend in the black/blue theme..
 
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
Going to install lighting very soon, so i think next images will be final images !!!!! : D

Cable routing, res change and M logo on GPU

 
Okay, so after 14 days with 200 hours of work, i finally had the time to work on the beast again!

I started doing the cable routing, and have done all the rest of the sleeving i needed to finish.. 
Still a long way to go with the cable routing tho, as i am awaiting new sata sleeving, hopefully be here monday !
 
I also finally got the last piece from parvum, that was originally going to be the SSD housing,
but something went terribly wrong with the meassurements(prolly my side), so couldnt use it at all
So instead i took the Monster logo inlay in blue acrylic, and put in on top op the Gpu instead,
left the black vinyl beneth to give it a "drop shadow" like effect  
 
And i made some changes to the reservoir sleeve, had to cut off some of the black binyl on the back, to give it the effect i was looking for.
I took a picture of it so you can see what i mean.. Pretty sure when i am done with installing the lighting in the case,
then it's going to look awesome!..
 
Anyways here's some images, while i work on installing the lighting,
also i am awaiting new uv leds, to arrive monday as well, so final images will be done mid next week..
Same with the Sleeving and EK block polishing guide videoes
 
 

 

 

 

 

 

 

 

 

 
 
Hope you like it so far, really in love with the LC Teleios sleeving!. looks so good in this build!.

UPDATEEEEEEEE
 
Just got home from 14 days with 200 hours work !!!.. 
so finally have time to finish this little Beast! .. 
I just finished the rest of the sleeving, and the cable routing .. 
Only thing left do to is installing the led strips,
and then FINAL IMAGES !!
 
Hopefully i will get the rest of the work done by thursday, so that i can use the weekend to do the editing of
the final images, and the video tutorials  
 
Stay Tuned Guys - Final images will follow very soon !  

Yep i actually ran into that problem on the buttom of the reservoir, and i had to replace it with the original ones  
 
 
 
 
hehe i AM sleeving everything i possible can

Finished Filling The Loop!!!

 
UPDATEEEEEEE!!! .. I finally finished the leaktesting, and the loop is filled up and complete! 

I absolutely LOVE the color of the EKWB Ekoolant UV Blue !!! .. Loops amazing, espicially under the illumination of the led strips 
unfortunally one of the 2x45 degree fittings from GPU to Mosfett block has a minor leak, once every 3 hours it has gathered a tiny drop of fluid .. 
So thinking that maybe i need to change the O-ring, and while i'm at it, i might just remove it and maybe do something like
45 degree fitting - tubing - 45 degree fitting, instead, to show a little more tubing in that area.. 
but will deal with that tomorrow morning..
 
For now, here's some images of the loop with the iv blue liquid.. Enjoy!
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
So what's left to do? Still need to figure out something neat with the SSD drives,
also still need to do the 8pin cpu sleeving and cable management.
And last but not least i need to install the lighting..
BUT the next 2 weeks i have alot of work to do, and no time what so ever to finish the build..
So unfortunally you guys will have to wait 2 weeks for the final images and updates.. <3

Installing the waterblocks
  Here's the waterblock installing, as you might notice i did not install the monarch x4 block on the memory yet, i will do this in a later post, when i mount the blocked mobo into the case pics will follow!
      Theese polished blocks just look so amazing ! cant wait to see it all with liquid in it ! <3 You might notice that after i blocked the pump and put on the nickel housing, I just HAD to sleeve those cables, i am NOT a fan of the original black,blue and yellow cables So i took my time and sleeved them in the colors i will be using in the build later on.
 
 

Some More Sleeving, 24pin, 2 x 8pin and more


 

I Love Sleeving !!!
 
So guys, i just finished the 24pin, 2 x 8pin pcie's some cathodes, the powerbutton and some more .. 
I had a a vote on my facebook page "BeckModZ - Liquid Designs" and other facebook groups, about the color combination for the 24pin,
i actually started out with 33 different versions of it.. sick! but narrowed it down to 4 samples that people voted on.
So the combination that won was my favorite too, but i changed out the middle wires for some black ones instead,
there was alot of blue on the 24 pin originally, and i changed it with some more black sleeving instead, since there's allready so much blue goin on in the build.
 
Anyways, here's some shots of the connectors and stuff.
This post will be updated later on when i get the rest of the sleeving done.
Will also make a image series or video turorial on sleeving, but will do that when the whole build has finished.
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
Hope you like it peepz..
I really enjoy sleeving, and this LC Teleios sleeving looks so amazing, and is so easy to work with when going 
heatchrinkless style!.. the weaving just looks so beautifull!!..
ooh btw, i also leak tested and filled the beast with liquid.. images will follow sooooon.

Reservoir Vinyl Sleeve


 

Allright, so i was going back and forward in my head with ideas on how to make the reservoir sleeve.

I tried to cut out the Monster logo from the Blue energy can, and seriously i tried like 6 times and just couldnt get it to be pretty enough!
Then i was thinking about some other options, first one was to cut out the logo in a alu tube, but my dremel was tired of living and decided to die
Next was to find some Plastic tube, but couldnt fint it in the right thickness, so had to figure out something else.
Thats when i came up with using some of my Matt Black Vinyl Sticker, and cutting the logo into the vinyl and then just stick it on the res.
Actually i'm quite happy with the result, the matt black vinyl sticker thing actually matches the case acrylic to perfection.
 
So anyways, here's some pics of the progress of the making.
 

 

 

 

 

 

 

 

 

 

 
 
Hope you like it, i threw some light in it to give you a better idea of how it's going to look.
Obviously a little different once the UV Blue liquid fills the reservoir, but i think it's going to look awesome,
and fit the Monster Energy Lo-Carb build theme pretty good..
And YES i see there are some air bubbles that i have to get fixed, but that will be done later:)

Parvum|Beast Design The Hardware
  Here's pics of all the hardware that's going to get stuffed into this little beast!
    Next update will probably be of all the watercooling parts <3
 
 

Just had to try this since its a monster blue energy inspired build


 

 So i just finished my Moster Blue Energy Drink, and decided maybe i should cut it and try to fit it over the reservoir, as a reservoir 


 
sleeve .. And i have to say, i actually think it looks kindda awesome.. Maybe i should try do mod it a bit, and see if i can cut out the logo and 
 
make the "M" light up with the UV blue liquid in the res ? 
 


 
So what do you think guys ? ..worth doing, or just looks to lame ? .. Keep in mind i have monster logo on case also, and that this build is a monster 
 

tribute build to the blue energy drink that i love so much

 

Test Mounting of the Waterblocks, and modding the flipped GPU.


 

Allright, got alot of work done last few days. Test mounted the blocks to see how it looked best,


then flipped the gpu, bend some acrylic sheets to act like supporters for the gpu, and added some velcro tape to hold it in place.
after that, it was time to figure out how i wanted the cut in the case and pci slot cover to be.
Then after the cut i saw i cut too big of a hole, but still its okay
I also was thinking alot about the pump placement, if i wanted it next to the 120mm rad, mounted in the back at the mobo tray, or where to put it for the best looks.. 
Then i thought maybe i could make another acrylic piece bended in the angle of the GPU, so that the Pump actually is tilted in same angle as the GPu, and i must say it's got the look i was hoping for ..
Also cut out a hole for the LCD temperature display.. 
But still awaiting the final piece from Parvum, so maybe i will change it later or redo it, 
but for now it works out great i think

I also drilled holes for the reservoir mount, and shot a few pics with everything in its place, and also with the window on to see how it looked

 


 






























 


 
 

So what do you think guys ? .. next up will probably be installing fittings and tubing and figuring out the loop

Test Mounting of the Waterblocks, and modding the flipped GPU.


 

Allright, got alot of work done last few days. Test mounted the blocks to see how it looked best,


then flipped the gpu, bend some acrylic sheets to act like supporters for the gpu, and added some velcro tape to hold it in place.
after that, it was time to figure out how i wanted the cut in the case and pci slot cover to be.
Then after the cut i saw i cut too big of a hole, but still its okay
I also was thinking alot about the pump placement, if i wanted it next to the 120mm rad, mounted in the back at the mobo tray, or where to put it for the best looks.. 
Then i thought maybe i could make another acrylic piece bended in the angle of the GPU, so that the Pump actually is tilted in same angle as the GPu, and i must say it's got the look i was hoping for ..
Also cut out a hole for the LCD temperature display.. 
But still awaiting the final piece from Parvum, so maybe i will change it later or redo it, 
but for now it works out great i think

I also drilled holes for the reservoir mount, and shot a few pics with everything in its place, and also with the window on to see how it looked

 


 






























 


 
 

So what do you think guys ? .. next up will probably be installing fittings and tubing and figuring out the loop

Installing the waterblocks
  Here's the waterblock installing, as you might notice i did not install the monarch x4 block on the memory yet, i will do this in a later post, when i mount the blocked mobo into the case pics will follow!
      Theese polished blocks just look so amazing ! cant wait to see it all with liquid in it ! <3 You might notice that after i blocked the pump and put on the nickel housing, I just HAD to sleeve those cables, i am NOT a fan of the original black,blue and yellow cables So i took my time and sleeved them in the colors i will be using in the build later on.
 
 

Installing the waterblocks
  Here's the waterblock installing, as you might notice i did not install the monarch x4 block on the memory yet, i will do this in a later post, when i mount the blocked mobo into the case pics will follow!
      Theese polished blocks just look so amazing ! cant wait to see it all with liquid in it ! <3 You might notice that after i blocked the pump and put on the nickel housing, I just HAD to sleeve those cables, i am NOT a fan of the original black,blue and yellow cables So i took my time and sleeved them in the colors i will be using in the build later on.
 
 

Maybe you want to highlight that it is a tribute build, a little better, since a lot of people dont seem to get it.

The sleeving has arrived
  Here's the sleeving and some extra cool stuff from Mainframecustom.com <3<3
 

 
  Absolutely in love with the blue colored sleeving, looks so sweet!. Cant wait untill i get to the sleeving part!
 

Part 1 of the watercooling parts
  Here's the first part of all the cool stuff i got from Coolerkit.dk and Ekwb.com
 
 
  So many awesome things came in from theese guys !..  <3
 

Parvum|Beast Assembling The Case


 

Pics of Case assembly, piece by piece.

 



























 
I must say, this turned out even so much more cool then expected !! <3

Looks like a cool project! Parvum is doing a fine job again Same goes for you.
Keep us updated! 

@DeuS1 Fair enough can't fault you there  

The Liquid & Light Test
  Okay so first i tried both the UV Blue and the Blood Red Ekoolant in a few blocks, and i really like both colors alot.
But then i put it under light, "sorry for the low quality, hard to catch the real life colors on camera". and i tried all kinds of colors, and ended up with white or dark blue as favorites "Last 2 images".  Also I am now pretty sure that i wont be using the Blood Red, just reacted really bad under all the lighting. 
 
 
  What do you guys think? and again sorry for the poor image quality with lights on.
I personally think the blue liquid reacts really nice under light, and think it will be dark blue or white led, "Last 2 images". 

The Polished EKWB Waterblocks

 
So i just finished polishing the "Frosting" of the waterblocks, and i must say it looks SOOOOOO much better this way

I was recording video when i polished the last block, but the camera fell on the floor .. 
so no video at this time, but will make one later so you guys can see how its done
 












 
Cant wait to see how it looks with liquid in them.. ! Will take some pics later with the blocks filled up and under different light