G3R489
-
Posts
126 -
Joined
-
Last visited
1 Follower
G3R489's Achievements
-
So I’m having some issues with a backup drive cluster I’ve created It consists of 3x500gb WD Blue hardrives in data parity mode using Windows 10 Manage Storage Spaces Now the drives work fine, no quibble, all data integrity is fine, I have done every check I know, CHKDSK, diskdrive check status actual hardrive checkers, all fine But upon boot a completely random drive out of the 3 will fail its SMART validation and say it is about to die. But then as soon as windows is open will not have a single problem to find and will pass all tests What on earth could this be, as I’m at a loss
-
Perfect, I’ll keep that in mind, Thank you again, you’ve been amazing for the help with this
-
You know what, I think I’ll take your advice on that and hold off for a little bit, as that sounds lethal without an actual protected trip switch for it Think I’ll stick to 1 or 2 duff £30 cheap nodes off eBay then for the mean time and not put anything too powerful in it, then if it explodes I’m not crying. Thank you for that as you may have single handedly saved me hundreds there. This was never meant to be too major, i buy these like a normal person would buy project cars. I learn how to work on them, get them going, then either sell them or have fun with them and run them until they die again.
-
Oh sorry forgot to tag you in it or whatever you call it on here, posted the horrors of my tiny cluster under the bed Got a with a normal R910 with a toolbox ontop too
-
Also to prove about the noise an power thing, this is a load being applied to the opterons. Also yea they are on carpet, but I only buy these things when they are gonna be sent to a scrap heap or melted down anyway. So if they live they live. IMG_7960.MOV
-
Well I’m afraid there’s none of that, I’m not joking when I say I sleep with 4 fully functioning quad opteron based servers under my bed that when running make over 100db easily I don’t doubt. However I will add, these are personal use, so when I’m not using them, they go off to save my sanity. And I’m afraid the goal is to learn how these things work, same as with every other orphan creation I make, for example the toaster pc in my profile pic. Ideally I would like to integrate it into my home network as a Beyerwolf cluster and just for shared render stuff, but nothing serious really. The goal for the end of 2023 is to make a program using RedHat to intergrate a fast multi platform system solution into an easy to control ui The M620 is out the window then and I’ll just keep waiting up on the M910 blades, just a nightmare to find. And yeah that would make sense why they did, as they are units and allot of people don’t have the space, time or money for them. But again don’t think I’m gonna run it constantly. No solar but got decent enough pockets to power as and when, however even if it’s bad I’m not here allot so when I am I turn all the units on. Also heat wise I’m used to the room running 34C+ so it’s not that awful, but dust wise it’s going to be a constant struggle Honestly, Thank you for the help, but more importantly the warning, to say buyers remorse is hitting is an understatement, but I’m gonna make it go where I can
-
So having a spot of bother specking out my M1000e and was wondering if there may anyone who can help a. The M620 blades say they can fit FCLGA2011, so would they be compatible with E7-8880v3’s which Intel say are also FCLGA2011, or is that not possible b. Is the server compatible with multiple types of blades at once, e.g. 4xM620’s, 2xM610’s, 1xM820 & 1x M910 c. If anyone knows, roughly how efficient are the 2360w PSU’s, as honestly don’t think I need all 6 (nor can I supply that much) d. Is there any good videos you would recommend for how the remote management tools work e. Any recommendations for blades that can fit a Grid K1 or K2 in? As would love to work with some Irrelevant information: I have never worked on a blade server before, I only bought it because it was cheap. Picked it up with every card, switch, PSU and extra in the back for £100, all working, then when the 2 pallets arrived realised what I got myself into. Any help is appreciated as I’m out of my depth XD
-
So I’m alive, and this is what I have done in my time off the site:
Servers:
4x opteron 6380 x4
1x opteron 6372 x4
1x xeon E8880 x2 + 2 Tesla K40
1x xeon 7750x x2
1x xeon single core (2003 era) x2
And an M1000e with no nodes
Main PC’s:
7700k, 2x 980ti’s
7400k, 1050ti (on loan)
FX4350, R7 260x (going on loan soon)
3770, 550ti (once upgraded going out on loan)
Main Laptop:
12700, 3060
And many more old projects you may have heard of on here and other other sites are ‘loaned’ out in the homes of those who need to game this Christmas
For once I’m ‘on top’ of my hoarding and after building over 5pc’s of various specs out of random stuff I’ve been given over the years or bought from job lots on eBay. I’ve put them to work for gamers in need, wether it’s a temp replacement for a dead machine, water cooled calamity or just someone who can’t afford it or has been scammed into a GT610 on eBay, I’ve been sharing the love to those who need it most.
With a few more GPU’s on the side, a 980, 1060ti, 770 and others I’ve still got a bit to go, however sourcing decent cheap parts is hard. My main struggle is PSU’s right now, so any help on where I can find 80+ Psu’s with dual 2+6 cables included is appreciated.Other than that, trying to set up a Beowulf cluster on Red hat 6 or 7 but project is such an uphill curve that I’m not sure I’m even in the right ballpark for what I’m doing (again any help is appreciated)
Final Hardware project was a fibre ring network using 8 old emulex cards, had it simplified working on windows but now the ‘cluster’ is in disarray so I’m not even touching it with a barge pole. Instead sticking to 3 Ethernet switches with a hint of putty until I get it sorted.
-
1 hour ago, G3R489 said:My main struggle is PSU’s right now, so any help on where I can find 80+ Psu’s with dual 2+6 cables included is appreciated.
These are on a pretty big sale right now. Non modular, but tier B in the newer cultist's PSU list.
https://www.newegg.com/cooler-master-mwe-450-white-v2-mpe-4501-acaaw-us-450w/p/1HU-000N-001X8
https://www.newegg.com/cooler-master-mwe-series-mpx-5001-acaab-us-500w/p/N82E16817171111
And here's a tier C 550W for a little bit less.
-
-
Which of these is the best choice?
G3R489 replied to Alex_G123's topic in Laptops and Pre-Built Systems
https://www.hp.com/gb-en/shop/product.aspx?id=4S1A0EA&opt=ABU&sel=NTB&source=google&channel=cpc&adcampaign=HP-GSC-Baseline-Smart-PLA-Laptops-Goo-UK&addisttype=u&kw=&adid=506691300669&gclid=CjwKCAjwiJqWBhBdEiwAtESPaDLF2r_tkC1XQJgcOfDPruTn5Qj1KLCfME5cjR4p2lk-Tp9j37f8KxoCQH8QAvD_BwE&gclsrc=aw.ds i think this is the best I can physically find for your max budget. I know not probably what you’re looking for but that’s the best HP I can find for your budget however I believe it’s worth going into a shop and seeing wether a 13” is big enough for your needs as the smaller screens can be more straining on your eyes in my experience. If you think it’s okay then I’d probably chase that one further as it’s a better cpu If not, if you’re British I find it can sometimes be worth a quick nip into curry’s/pc world as they’ll sometimes sell off some good PC’s at a cheaper price if they’re older stock. -
Which of these is the best choice?
G3R489 replied to Alex_G123's topic in Laptops and Pre-Built Systems
I’d agree with darkseth, 250 nitts is a tad low so you may have to clean it more often and may be difficult to see outdoors, aswell the batteries on both must be taken into consideration for how much you’d use it intensively the more expensive one is nice, but again for lighter work loads it should be okay, but it’s integrated graphics may take a little longer if you’re rendering and such Overall I think you could get away with the cheaper one in allot of cases but for those you can’t you could always use cloud rendering or something to help you out so there’s always another way if you find out it’s not enough later -
Although I’ve never bought from them, I would say go for it, but use PayPal to pay as they seem very good at refunding if you’ve been scammed for stuff like this. Best of luck!
-
Which of these is the best choice?
G3R489 replied to Alex_G123's topic in Laptops and Pre-Built Systems
I like these, however if you’re in an engineering course that requires 3D Modeling such as AutoCAD or Solidworks you may require something with a bit more of a hefty gpu they look sleek though, maybe a HP Omen would be the best of both worlds? If it’s just for compiling code however and low level applications like word these will be more than good enough -
I’m not fully sure what could be causing this. Simple things to try are updating your OS and Apps to see if that mitigates crashing. However could be a firmware issue, so may be worth checking drivers are in date and maybe even updating bios. Also may be to do with the PC’s sleep state, as there’s many different types, however not fully sure.
-
Steam not seeing network storage anymore?
G3R489 replied to c0mplexx*'s topic in Servers, NAS, and Home Lab
You can go into and set folders in steam itself, make sure they are still set to the right location for the games causing issues however CANT imagine it’s good for performance -
Like anything if you get too low it will damage the card or the system may not even boot but for 10C I see no problems and you’d have to check with the manufacturer if your exact tech can run in those temps
