Jump to content

NewBuilder2020

Member
  • Posts

    5
  • Joined

  • Last visited

Awards

This user doesn't have any awards

  1. Linnaeus and Moonzy, The new motherboard got it running again with a bios post. Strange that changing RAM speed in a drop down list could kill a motherboard. PRO TIP: Overclock your things correctly *check tutorials and guides thoroughly* and you may avoid these issues that I have created myself. OR.. Could have been hardware issue. *which I would like to believe *
  2. Linnaeus, I already went ahead and purchased another motherboard, my brother is going to build it for me to ensure it's built correctly lol. I'll let you know if it solved the issue.
  3. Hey Moonzy, I just resested the cpu no no avail. I did jump my psu again with fans and it works. I'm assuming the mobo is dead at the point?
  4. I tried shorting the power button pins with 2 different PSU's and nothing happened. Monitor is plugged into motherboard HDMI slot. Will try reseating the CPU and try get display with the GPU when I get home and will post an update Thanks Moonzy
  5. Hello all looking for help. This is my first time building a PC, a few days I installed everything it booted up 1st try and got into bios. I decided, hey since I'm already here let me change my RAM speeds to 3200 did this completely wrong even after watching tons of PC build videos , saved and exited and shut the PC down cause I was still waiting for my Windows boot drive to finish up Should have had it done prior to starting up . Now the the only thing happening is the motherboard has the RGB and nothing else is on. Specs: ASUS TUF Gaming B550-Plus AMD Ryzen 7 3700x Corsair Vengence Pro 16gb 3200 WD 500 GB NVMe CoolerMaster LC240E GameMax 850W PSU EVGA RTX 2070 Super KO Things I tried with the help of my brother: Double checked all the wiring, he found my HD Audio was inserted improperly, other than that everything was good. Took the GPU out. Took both RAM out. Inserted single RAM in each slot trying for both RAM sticks. Cleared CMOS. Took battery out 5 minutes while holding down power button, power cord not plugged in. Left CMOS battery out overnight and jumped the CTRL. Tried his Corsair CX650m with only 8 pin and 24 pin in. Jumped my current battery, fans and RGB turn on. Changed my RGB setting, unplugged and set the PSU for a while and tried again with the RGB setting saved. Attempted to jump motherboard with both PSU's from the PWR_SW. What I haven't tried but will after I finish work: Check the CPU for any damaged pins or scorch marks. Jump my current battery with case fan attached. Take the motherboard out and try jump from outside the case. The following attempts have the same issue stated above, RGB on motherboard is the only thing on. No beeping sounds or LED's lighting up on the Q-LED. Just trying to get opinions so if I need to buy something new, I can do so before going home. Thanks in advanced!
×