Matt456

I ran the memtest for 3 hours and it didn't find any errors so I am fairly confident that is not the issue. I had some issues running the wd smart scan as it kept saying 'Operation Failed' however I finally got it to run a scan and it found no issues and I ran chkdsk. At this point I would assume it is probably a motherboard issue unless you guys have any other ideas

When I started having problems I immediately went into the bios and reset everything to optimised defaults, so XMP is disabled I ran this memtest: https://www.techpowerup.com/download/techpowerup-memtest64/ and ran it for 30 loops I'll have a look into possible bad firmware

I am running the 2004 version I'll give that a try thanks!

My PC has been working fine for over 3 months but, just recently I have been experiencing frequent software crashes and BSODs. When trying to reinstall windows having booted from an intsallation USB windows blue screened during the install (Stop Code - Page Fault In Nonpaged Area.) However I was eventually able to reinstall it. I have: Ran the memtest and it found no issues Reinstalled my GPU drivers Reinstalled windows (deleted all partitions, and fresh installed from usb) Updated motherboards BIOS Ran CrystalDiskInfo and all my drives are healthy (SDD 99%) Checked and double checked all cables are properly connected. My specs are: Windows 10 Home 64 bit gigabyte x570 gaming x (BIOS version F30, 2‎020/09/15 , latest, Updated Yesterday.) AMD Ryzen 5 3600x 6-Core (overclocked but issue still present at stock speeds) 2x8GB Thermaltake TOUGHPOWER Z-ONE RGB DDR4-3600 CL18 Memory (2666MHz) NVIDIA GeForce RTX 2060 Western Digital Blue 500 GB M.2-2280 Solid State Drive boot drive (2x) WD Caviar blue 1TB HDD Corsair TXM Gold 550 W 80+ Gold Certified Semi-modular ATX Power Supply I have attached the dump files for the BSODs. Any help would be greatly appreciated! Minidumps.zip Report.zip