Jump to content

AlphaStrykes

Member
  • Posts

    8
  • Joined

  • Last visited

Everything posted by AlphaStrykes

  1. HOLY SHIT I LOVE THIS FORUM. Thank you guys so much the help!!!!!
  2. My GPU only has one 8-pin port.
  3. Sata power is in. GPU is plugged in in the top right blue circle PSU/Motherboard is plugged in at the right circle. Not sure what you mean by cpu power being plugged in
  4. Ok I switched the hdmi cable to the GPU, but the same thing still happens... The monitor turns on, doesnt get a signal, and turns off.
  5. Ok I switched the hdmi cable to the GPU, but the same thing still happens... The monitor turns on, doesnt get a signal, and turns off.
  6. Yep that is where I have the cable from the case ports plugged in
  7. I connected the HDMI cable to the ports on the motherboard, not the GPU. As for cables on the case, there were cables for teh power button, reset button, and one "positive" and one "negative" cable. There was also a thicker cable which connected into a slot on my motherboard labelled "jusb3". The motherboard has areas for "jusb1" and "jusb2" Sidenote: For some reason I can use the power button to turn the PC on, but not to turn it off.
  8. I have just built my first pc, and after turning it on, everything runs... except the ports. This includes the ports on the case itself, and the ports that are on the motherboard. This means that when I connect the hdmi cable from my monitor to my pc nothing happens, the monitor just says "no signal - entering low power mode" and turns off. As far as I can tell, the problem is that the usb ports on the case dont have a cable connecting them to the PSU or the motherboard, and I have no clue what the problem with the motherboard ports is. On the part picker website I used it said the build would require approx. 396 watts. Plz don't go to hard on me, this is my first ever pc build [SPECS] Motherboard - MSI B450M pro-vdh max GPU - MSI Ventus RTX 2070 Tower - Corsair Carbide Series Spec 05 Mid Tower PSU - Corsair CX 450M (450 watts) Processor - AMD Ryzen 5 3600X Edit: There is one very very light scratch on the motherboard next to where the graphics card is, because when I was inserting it, the metal jutting out slightly came over the motherboard. i don't believe that would be enough to ruin the ports though...
×