the cool guy X_X

This is a ryzen 3 3100 oc at 4.6 Ghz @ 1.3125 v . I am wondering how this voltage was enough?

no i can recognize the 5G network

not when i am in my room it drops sometimes to 2mbps

i can't find the 5G network from my phone

SAMSUNG A20

it doesn't support 5G

what should i change ?

so last week i upgraded my network from adsl to fiber . and i chose a 250mbps plan from a network provider here in Oman called omantel . and i started using it but i discovered something really stupid . that my non-5G phone max out in the speed test at 50mbps . so i was very angry and i called the costumer service . the asked me to check the speed in my pc . so i did and it reached 250mbps . then they said that 2.4 Ghz network for my phone will max out at 50 mbps only although i am paying 110 usd / month . so i told them that there is nothing in their website indicates this . so i asked if i can cancel my play but they said that i should pay about 300 usd to do that . i was shocked . but i asked them to help me with another thing that is being that my room is only 7m away from the router but the signal is very weak there . they said that i should buy and extender which will cost me 180 usd . so i searched in google and i fond that there is a specific setting that increases the bandwidth for the 2.4 Ghz network . it is something like (802.11n) idk . if anyone can help i will be really thankful . NOTE * DON'T SUGGEST FOR ME TO PAY THE PLAN CANCELLATION FEE CUZ I CAN'T AFFORD IT .

we will see later

put there is still a probability that linus has the 5600 don't you think so ? and sure AMD will release it sooner or later , it might even be sooner than what we expect .

so it isn't a mistake . well AMD didn't announce anything yet .

this doesn't seem correct .

( first plz don't ask about the spilling mistakes because i am writing fast and english isn't my 1st language ) so i build a pc at October and i bought a 500gb HDD from newegg and a SSD . After i build it and downloaded all the drivers and programmes and game i realized that 500 gig is not enough for the stuff i need . So i decided to buy another one . but soon i remmembered having an old laptop in my basement that has another 500 gig HDD . so i went and grabed it from the old laptop and i placed inside my pc and i connected the sata cable and sata power , and i tured on the pc . the pc didn't reconize it in the first 2 minutes after turning it on . but later it did . i felt confused so i downloaded crystal disk info and crystal disk mark to check if there is a problem . Later i got the results . a "reallocated sector count warning " showed up . so i searched the network to find what that mean . after alot of searching i had something to try . Which was the chkdsk command in the cmd . i ran that test multiple times but it always failed . so i ignored the "reallocated sector count warning " and i downloaded about 25 gigs of videos to test the HDD by my self . it copied 10 gigs from my 500gig HDD which i bought from newegg to the old HDD , and then it said the the processes failed . so i tried making 2 partitions on the HDD through disk managment and i was able to make 2 partitions ( as i hoped the bad sectors will be on any of these partitions so that i can atleast use the other partition ) so i tried this theory on bit the partitions but it failed . so i tried downloading a software called stellar smart drive monitor , but for whatever reason it refused to download . so as a last thing i used crystal disk mark and set it to 64 gigs for 9 loops . and now i am waiting for 2 hours with no results what so ever!!! i hope to get any help on how to repair this piece of sh*t . thx for spending time to answer my question .

I don't know . I wrote that I am new to overclocking

I tried and I was able to get it to +650 at memory frequency

Wasap there . I was overclocking my gtx 1660 super using msi afterburner and I got shocked by something. I was tuning my gpu core and memory frequency and by mistake i added 640 mhz to the memory clock . But the pc didn't crash! So I did a benchmark and it still didn't crash at all . I am new to overclocking . This is my 2nd time . So I am worried if this is not safe. Plz if u could help I would be thankful.

I Pushed it further. I reached 4.225 ghz all core at 1.225 volts with no craching !!!!!!!!!!

There is a cpu burner in fur mark

Temp starts hitting more that 87 when I reach to 1.3 volt

Under load my temp after tweaking the fan speed in bios is hitting 79 c and 52 at no load

This is my first time overclocking and I have no idea what is the best settings . I used ryzen master to oc and this when things started getting complicated. I set my speed at 4.125 ghz and my voltage at 1.225 . I don't know WTF happened but it didn't crash !!!!!! I tried cenibench and fur mark to stress my cpu . But IT DIDN'T CRASH !!!! I need help . I don't know WTF is going on .........

Gigabyte made only 550w , 450w and 650w

Well there is no pb500 . It is p550b . This is first . Second , this psu was released from 120 days ago ...

What ? I didn't understand