Som3a

Thank you so much, I will try that. Unfortunately this is basically my last hope all I can think of is RMA-ing the card and get something else

@SkilledRebuilds First of all I'm sorry for making multiple threads, I got no answers on the first one. I'd like to say that there was no gaming experience to begin with since the first few games I installed and launched kept crashing no matter what I did I can try underclocking the memory and seeing if that works but rolling back to the older BIOS did nothing so I don't think that's the issue. I am almost certain it's Wattman as many other forums said it doesn't play very well with adrenalin but then again I'm not 100% sure. Any help is greatly appreciated and again I'm sorry for making 2 threads.

Nothing really in mind but there are some pretty good cases out there for not much money, I personally own a Bitfenix Enso Mesh, with some extra fans. You could also get a TD500 mesh from coolermaster or a Corsair 220T. It's up to you

about 1200 USD or approx 7850 Yuan, you will want (assuming you can find them) : a Ryzen 5 3600 a 3060 Ti a B550 board 16Gb (2x8) of 3200Mhz CL16 RAM and a 750w PSU at least from a reputable brand You will also need a good case, an SSD and a HDD Edit: you can cut corners by maybe getting a mATX board and a bit less storage

Maybe the AIO if you can afford it but the H212 is still a very adequate cooler and the 5600x isn't a hot running chip

As the title reads I'm trying to delete or disable Wattman. I have a RX 5600XT and since I got it every single game I launch has been crashing and I just want to play games on my new rig. I tried everything, rolling back the drivers, rolling back to an older vBIOS (I have a Gigabyte Rev 1.0 card and I updated to get the 14Gbps) and I even tried DDU-ing the drivers and reinstalling them. Every time I crash I get an error message saying it's a driver problem and a notification from Wattman saying my fan curve and overclock was reset. Then someone here on the forum said Wattman is the thing causing my issue and I should disable or delete it. They said I have to DDU the drivers and install them without Wattman which I don't know how to do. So would anyone be able to help? Thanks! Edit: I know that Wattman is the older software for AMD but I don't even know how it gets on my system, when I first installed drivers I installed Adrenalin version 20.12.1

Perfect, it supports 3rd gen no problem, even 5th gen

That's hard to accomplish with your budget the cheapest RTX capable card at the moment is the 3060 Ti it's 400 bucks and that's the MSRP so it's a lot more expensive. RGB AND RTX aren't very achievable at this budget. Bump up your budget or settle for less performance is my advice Edit: That sounded rude, I'm sorry about that, my point is that you have to make compromises when you have a tight budget and can't get everything

for 750 bucks playing with RTX on at decent framerates IN CYBERPUNK is pretty tough, you'll want to get at least a 2060 and framerates won't be good at all

What settings are you looking to play at because Cyberpunk is a AAA game while Minecraft can run on entry level hardware. for 5000 Yuans or approx 750 bucks you will probably end up with (assuming you can find any of it) : a Ryzen 3 3300x a 1660 super a B450 board that supports 3rd gen Ryzen 16Gb of 3200mhz CL16 RAM a case you like that has some airflow and a 600w PSU from a reputable brand.

Will run just fine, its a 75w TDP card and doesn't even need external power, can take all of it's power directly through the PCIe slot. However if your PSU has a 6 pin PCIe connector be sure to use it

yes, get a 3300x if you can find one

Is it the Tomahawk or the Tomahawk MAX ?

It's normal

Don't splurge on RGB, you're on a tight budget so get yourself some 60-70 dollar ram of the same capacity and speed, not the 115 dollar stuff. Then for your CPU a Ryzen 3 3100 or 3300x if you can find them are pretty good with this card, you can probably step up to a Ryzen 5 3600 (if you can find one) but I don't see the point since it's just a 1650.

As the title reads I'm trying to delete or disable wattman. I have a RX 5600XT and since I got it every single game I launch has been crashing and I just want to play games on my new rig. I tried everything, rolling back the drivers, rolling back to an older vBIOS (I have a Gigabyte Rev 1.0 card and I updated to get the 14Gbps) and I even tried DDU-ing the drivers and reinstalling them. Everytime I crash I get an error message saying it's a driver problem and a notification from wattman saying my fan curve and overclock was reset. Then someone here on the forum said wattman is the thing causing my issue and I should disable or delete it. They said I have to DDU the drivers and install them without wattman which I don't know how to do. So would anyone be able to help? Thanks! Edit: I know that wattman is the older software for AMD but I don't even know how it gets on my system, when I first installed drivers I installed Adrenalin version 20.12.1

Oh okay, how would I go about uninstalling it then?

Thank you so much, I will try that whenever I am able to but I am still a bit confused about Wattman. I open my Radeon settings using Alt+R and tune my fan curves from there. What does wattman exactly have to do with this and how would I uninstall it? Sorry I'm more of a hardware person than a software person and don't really understand how any of this works.

Built the pc a few days ago, the card was bought in April, crashes in all games but YouTube is fine. I have a R5 3600 and a Corsair CV650 Edit: I'd like to clarify I only have 2 games for now but I'm planning to install more later because of my limited wifi package, sometimes they crash immediately sometimes they run for a few minutes then crash, the games are Minecraft and Rocket League

I am using Adrenalin 2020, at least I think so, never heard of Wattman until a few days ago when it started crashing, I just get a notification saying that Wattman settings were reset. Any idea on how to "switch" to Adrenalin??

Never has any issues booting, just when launching games

As the title reads, my games crash immediately after launching them. I'm running a Gigabyte 5600XT Gaming OC. I have the latest AMD drivers and the latest F3 vBIOS. I have tried everything I could think of: flashing an older vBIOS (F2), rolling back to an older driver version, DDU-ing the drivers and reinstalling them and even reseating my card. I used to get this error message But now I no longer get it for some reason, also, my WattMan settings keep resetting on their own whenever I restart. I have no idea what the issue is and all I want is to play games on my new rig. Any help is appreciated.

Sadly, it didn't work. I'm starting to think it might be the vBIOS I flashed. I am open to any other solutions. Either way thank you so much for the help.

Thank you so much, I will try that. Hopefully it works

Sorry for the ignorance but what is DDU and how would I go about doing that?