kanaron

ATX. Only one x16 slot. GPU is ok for sure. GTX 1050 was working great in previous build. In this build GTX 1050 was behaving same as RTX 3070 is behaving now (no problems at all just anoying VGA LED and 5 beeps). I rebuilded previous PC and GTX 1050 is still working great right now. I also had RTX 3070 in previous build for one day and also worked great Both GPUs are sometimes giving anoying VGA LED and 5 beeps in this build and both are working great in previous build. Also I think bad GPU would give some bad symptoms like artifacts or no screen output but I dont have any screen related issues at all Maybe RMA MOBO if possible. As I said I did RMA it once already and got it repleaced. Maybe this time they would refund it

Ok

Hello I have strange and anoying problem with my motherboard Gigabyte Z490 Gaming X. When I pluged HDMI cable into my GTX 1050 to first HDMI port everything worked correctly. But when I plugged it into other ports then I always got 5 beeps, red VGA LED stayed on, PC booted up correctly and I had screen output. So everything was great except 5 beeps and that VGA LED that was always on. No big deal, I just kept HDMI cable plugged into first port. But later I changed GPU to RTX 3070. I am still plugging HDMI cable to first port. Everything was ok for most of the time. Very rarely I got 5 beeps and VGA LED and I had screen output but I just restarted PC and everything got back to normal. Until few days ago I bought anti sag stand just in case. There was a bit of sag. Long story short: it has RGB. RGB Fusion to control RGB can't handle wave effect properly. I had to do a lot of restarts. I did about 10 restarts After one restart I got 5 beeps and VGA LED. After another restart again 5 beeps and VGA LED. Now almost every time I have 5 beeps and VGA LED PC is working ok, I have screen output, PC boots up normally, everything is great but that 5 beeps and VGA LED is just very anoying. Also Im a bit concern if that could escalate in future. My mobo was repleaced once as first one had PCIE x16 slot that doesn't worked at all from factory Specs: CPU Intel i5 10400 with stock cooler MOBO Gigabyte Z490 Gaming X (BIOS F2 I think) RAM 2x HyperX 16GB 3200MHz Fury RGB GPU Gigabyte RTX 3070 GAMING OC NVMe Samsung 970 Evo Plus 500GB SSD Samsung 870 QVO 2TB PSU be quiet Straight Power 11 750W Platinum Windows 10 64bit

I changed it now and in fact it worked Thanks In bios i can see now PCIE4: Nvidia GF 1050 GTX, but I have question: does it affect performance of GPU? First slot was PCIE x16, this is x16 running x4 (as documentation says) And does that mean that first slot x16 is broken? Should I go to shop and return mobo?

Hi, I just upgraded my PC and I have problem with old GPU Spec: CPU: Intel i5 10400 (box cooling) mobo: Gigabyte Z490 Gaming X GPU: Gigabyte Nvidia GF 1050 GTX (old) RAM: 1x Kingston HyperX Fury 16GB 3200MHz PSU: be quiet! Straight Power 11 80+ Platinum Storage: M.2 Samsung 970 EVO Plus 500 GB HDD Seagate Barracuda 1 TB (old) HDD Seagate Barracuda 512 GB (old) OS: Windows 10 At first I build PC without old parts. Using integrated GPU I installed Windows 10, all mobo drivers and everything works great until I installed old HDD's and GPU. 1050 won't show up in bios. In easy mode I can see in PCI section: "PCIE16 N/A". But when I start PC GPU fans starts spinning for 1 second, RGB is on all the time and backplate get a bit worm When I pluged hdmi to 1050 I got 4 long beeps and VGA LED is on which indicate that there is no hdmi connected to mobo (I checked without 1050 and without hdmi to mobo, same 4 long beeps) What should I do to solve this? Clear CMOS? Also yesterday GPU worked great on old PC