gtatrain

hello good day. i installed a 360mm radiator on my xeon x5675 cpu and have it set as push pull using 6 identical fans. after setting the fan profile in the bios i noticed that the fan profile only seems to count for the cpu fan header. all the other pwm headers seem to run at a higher speed. currently i have 3 fans on the cpu header and the other 3 on fan header 3 (atx power side of the board) would attaching 6 fans to 1 header be a big problem? or does anyone know if perhaps another header on this board is capable of pwm regulation?

hello. good day. i got a g1 guerilla board here. and it has big bios bug.. the board received a bios update to support 3tb or larger drives. well.. the problem is. it only works for one 3tb+ connected drive if i try to boot the system with more than 1 4tb drives connected (2 times 4 tb in my setup) it wil get stuck on "verifying dmi pool data" (i also disabled the sata 3 controller in the bios incase that was the problem)+ the 3tb bios update does not allow the sata 3 controllert o accept 4tb drives (not required.) https://www.gigabyte.com/Motherboard/G1G...-rev-10#ov the motherboard anyone have any tips for what i can do? my end goal is to have 2x 4 tb and 1x2tb. but not sure why the behavior is like this

hello. i bought a ML360R aio. and it came with this fancy rgb controller. now my motherboard is ancient so it has no rgb headers. so i connected the device to my usb port. and downloaded masterplus.. it asked to update the firmware on the ARGB box and it did so succesfully. after that.. the software closed.. and never opened again.. i reinstalled it. rebooted the pc. ect. the icon wil just show in the tray for a moment and then disappear.. (the ethernet icon tray) then i read about manual firmware updates. so i ran that. and reinstalled the software again. and stil nothing... anyone know how i can fix this. or any 3rd party software that might work with this box?

soldering would not be the hardest i think. if there is no other way.. i just need to find info about what color the wire is. ect is this pin a usb 3 or usb 2 pin? i have seen usb 3 to usb 2 adapters before. so if its a usb 3 related pin it would just run as a usb 2 port then. right? (even then. this might even be the usb c port which wil never be used to begin with)

The actual port on the motherboard. The pin just ripped right off.

hello good day. today i was working on installing my rig into a new case. and when i was working on the usb 3 cable. i noticed 1 pin was bent flat. which might be the reason why 1 of the usb ports didnt work on my case. i tried to bend it back carefully but it instantly snapped off. after some checking it appears to be a intA_p2_D+ pin. is there anyway for me to salvage this? my motherboard is a gigabyte g1 guerrilla. which is lucky to have usb 3 to begin with. thanks you in advance for the help