Meczox_

Btw how long should i leave it clamped for?

This is the tool i can get its a link to a video but its the same tool relid relid tool and delid tool

I found a cheaper tool but it doesnt on with the relid tool. For me the 40$ is auite alot, i live in cambodia. So if possible can i not use a relid tool n put dots on the ihs and use the motherboard socket to align the ihs and hold it ?

One question though, i know not putter the ihs back is the thing, but im planning to sell it after so do u think i need the alignment tool thingy? Or can i just align it by hand and it will work fine? Or is there a trick to it without using a tool?

Yea I’m planning on deliding it later when i dint mind breaking it. As of now kinda need it.

it was honestly kinda scary cus I legit had to pull it with everything i had adn wiggle it. thought I would break the boiard xD and lucky the peerless assasin se 120 is doing better at cooling it than this 5y aio xD

I just got it out, for some readon there was small tiny edge on the screws which prevented it from sliding out. I had to kinda wiggle and force it ALOT to come out but everything is fine now, i installed a new cooler and all seems well for now at least

I can’t seem to remove this backplate for this AIO. Coolermaster ML240L RGB. It seems to get stuck on small parts on the nail with the back plant from the front.

Do you have a gpu or are you using the igpu? And if you have a gpu try taking it out and use the igpu, also check all the cables if the gpu is slotted in correctly is the cable plugged in all the way etc

I got them from taobao (thermalright t-mall store) an chinese online site with a forwarder to ship to my country cambodia

Yes should be the same as the non se but like 3 less fins stack and no top cover but from what I’ve been performance is about the same, honestly it was such a good deal for 25$ .

Dude saw ther thermalrighht assasins se do you think it’ll be enough? For the cpu at 4.7ghz? edit: oh and the old aio is the cooler master ml240l not the v2 one.

Yea saw those too, especially the assasins ones will be on the lookout

Will do that, and if its still bad ill get the ak620 then, just abid said cus i can get ak500 for only 35$ xd but will get the ak620 instead. Thx alot dor ur help

I tested it with the fromt panel off too so airflow should be the cause here not sure i forgot the name but it is a cooler master AIO

Yep repasted it a few months ago

So my old AIO 240mm cooler master is struggling lately it hits 90C in cinebench r23 at just 4.2ghz not even the 4.7ghz. So was planning to switch to the deepcool ak500 will this be enough to run it at 4.7ghz with a decent temp? Edit: repasted it a few month ago, and tried testing with my front panel off for air flow already same result

So I can just try measure the old pads length with a rule or something n cut it according to that right?

So I'm planning to repaste and replace my thermal pads and thermal paste. I've order both of them Thernalright Oddessy 1mm and 0.5mm pads and TFX paste. I would like to know for the pads does the length of the pads needs to be 100%? Or will it be fine as long as it is roughly the same. The thickness should be correct from my research.

So I am planning to buy a used budget pc for my mother office work. Currently I found one for 185$ with and i3-10100, Asrock H510M-HDV R2.0, 128gb SSD, 1TB HDD and 8GB DDR4 which was bought in November (According to the Receipt). my mom is not tech savy she's mostly stores everything in her desktop. I personally don't know of a way to make it easier for her, while still making windows snappy. I know that windows is on the SSD but want to know is there a way to make it easier for her. For example, when she saves her files to desktop make it automatically stores in the HDD while still showing it in the desktop. If anyone has a better way that can ease this for her, please let me know.

So I just notice my headset microphone as causing static noise. I decided to do some process of elimination and ended up being the audio port on my motherboard a msi z370 gaming m5 and I'm using the front panel for now but is there any other way for me to do because the front panel is quite far and is causing a lot of inconvenience I was wondering is there any thing I can do besides sending it to someone to fix it

So im trying to ask some questions on lube but it keeps getting deleted

But the outemus have a weird pin i believe thats why i want to make sure

So you didn’t read it wrong as of now i own redragon K530 its a outemus switch so i can only swap with other outemus switch so im olanning to buy and do some modding and want to know in the future if i buy a gateron switch keyboard like the krychron K6 for example can i use the outemus switch and just out it in without doing and trimming and stuff?

I know its enough but i need to know how long it last cus i rarely change keybord so i need to keep it until i change which is probably when this one breaks so in a few years