Premsanity

Intel i9 9900k I’m trying to use integrated graphics, sorry should’ve stated

I started my PC for the first time after just building it... and for some reason it won’t display anything on boot, my top fans run but don’t light up and my MnK won’t connect to it through USB. Any ideas? 61344233252__CEF18A0C-0938-4FFC-A9A9-8C96305D0320.MOV

Will do thank you for the Info

Oh alright thank you

I am finally onto my PSU after a good 10hrs of me trying to wire the internal wires of my PC build (who actually knows if they are right, lol) but besides that I’m on to the PSU, where yet again I’m lost in what cords I need and don’t need. ‘I know the generic stuff like the Motherboard port, CPU port, and GPU port but I have no idea what the rest of the wires are and which ones I actually need. Specs: Intel i9 9900k EVGA FTW3 ULTRA HYBRID RTX 2080 Ti Corsair H115i Pro RGB Samsung 970 EVO PLUS Corsair HX750i Cooler Master Masterbox K500 Asus Rog Strix Z390-E I’m assuming I need way more than what I have plugged in but idk what

Okay, I feel like an idiot that makes so much more sense. Thank you

So basically since I don’t have enough ports I can’t do anything with the button correct? But I have one last question then I’ll leave you alone. I have these cords that are connected to the panel and a USB (I connected the USB already but these wires aren’t labeled and I can’t find any cables or ports that match them. I appreciate the help, gives me a little bit closer. I’ve been sitting here for about 8hours

Wait, I’m sorry are you saying instead of using the switch on the motherboard panel I can connect it to the RGB controller as well?

I did figure out the panel connectors but as for the RGB hubs I seem to only have 3 ports for them but I have 4 cords. The motherboard has 2 headers and the controller only have 1 and I’ve used them all with one left over. (This one runs to the panel) it’s a bad pic but you get the point. What am I supposed to with that?

Cooler Master Masterbox k500 and Asus Rog Strix Z390-E. I can’t find anything online and I can’t figure it out with the manuals. I did what you said and got it to stick correctly btw I’m just stuck with panel connections and then I can move onto PSU connections

Do you think you could tell me what this mess is for? They all connected to a hub in the same cable and then ran into the front of the case.

That’s what I thought at first but they seemed loose and unfortunately one of them doesn’t reach... but thank you.

Quick question on these fan’s cables. These fans came with my case, I connected the 3 pin fan cables to their respected ports but I have no clue where these connectors are supposed to go.

Hi, I’m going to be posting a lot of these so I can get answers quicker and I’ve been stuck for quite a while now. Unless someone have the time to help me out directly over private messages (if you do just pm please). If not that’s fine I’ll gonna post a new thread every time I go so they are seen more often. Anyway, I’m building my first PC and I’m down to the wiring (I’m kinda mental when it comes to wires lol). My question is what does this cord plug into on the motherboard? It says RGB HUB on it but when I plug into “RGB HEADER” it doesn’t stick, it’s very loose.

I will try this out and see what happens all I know is there is lots of cords and wires everywhere. All over my desk and hanging in the case.

In all honesty I have watched those videos before I just used them as a refresher (which obviously didn’t work) I just don’t know what’s what and what goes where it’s confusing me with 100 wires in front of me and not knowing what goes where

I did watch them but I’m brain dead with wires and very lost still I literally need someone to sit here and tell me specifically what is what if I want to get anything done. I’ve made little to no progress within the last couple hours and what I have plugged is is a mess all of the case there’s no way of cable managing any of it.

All of them lol I can’t figure out anything and I don’t want to break anything so I’m just kinda staring at it all

I’ve been watching the videos but I’m brain dead when it comes to wiring and hooking things up. I’m literally lost I only have a couple fans plugged in and the CPU and Motherboard power pins plugged in. There are cords everywhere and I suck at this

Already set on the EVGA RTX 2080 ti Ultra Hybrid, I’m jut saving up for it at the moment. It’ll be my last part

I didn’t list the ones that don’t require wiring. I have them all but GPU. Asus Rog Strix Intel i9 corsair h115i rgb pro corsair dominator platinum Samsung 970 evo plus cooler master Masterbox k500

Didn’t list them I use M.2 storage CPU and RAM is already installed I’m just stuck on wires. GPU I don’t have yet but that goes in last anyway and i9 has integrated graphics so it’s fine while I save up for it

I have all of my parts in... now it’s on to wiring which I have little to no knowledge about. I try reading the manuals but I’m still dumbfounded. Any help or info I’d appreciate it. PC Specs asus Rog Strix z390-e Corsair H115i RGB Pro Corsair Hxi 750 PSU