SEAL62

Yes I treid that, but the Problem already occurs during POST so no drivers should interfere here.

changed it to disabled but still 5 beeps on boot and no image.

Hello everyone, I am currently working on the following system: CPU: Ryzen 5 3600 RAM: 16 GB DDR4 MB: ASrock B450 Gaming K4 GPU: PowerColor AXRX 5700XT Power Supply: 500 W no name | now 750 W Seasonic the system boots with 5 beeps at POST (No GPU detected) and doesn't deliver any image. Changes made so far: new PSU (750 W Seasonic) -> No image replaced 5700XT with NVIDIA GT 710 -> PC boots without errors and image is visible replaced GT 710 with RTX 3050 -> No image tested RTX 3050 and 5700XT in different system -> they work fine tested 5700 XT and RTX 3050 in different PCIe Slot on original system -> No image applied BIOS update to motherboard (ver. 4.5 to 5.6) -> no image I have no idea why the two GPUs (RTX 3050 and 5700 XT) won't work on the described system. The GT 710 works fine, the GPUs work fine on diffrent machines and it doesn't matter what PCIe port I use (CPU or chipset) they still don't work on that machine. Any help is appreciated Thanks in advance

Hi everyone, I am currently trying to troubleshoot an iPhone 7 with a weird issue. When the phone is locked, the lockscreen automatically turns on after a few seconds (for about 2 seconds) then turns off again. After 4-5 seconds the same things happens again, over and over. The "Raise to wake" function is disabled, phone was restarted several times, problem still persists. Except of that everything works just fine, no screen issues or anything alike. Thanks in advance

Hi everyone, I am ’hosting’ my own openvpn server to connect to a different facility. However as soon as I am establishing a connection via cli I get a few errors which in the end doesn’t matter as the connection still works after those errors. Still I would like to diminish those errors and get everything working properly. First of all this is what my vpn config looks like: client dev tun proto udp remote XXXXXXXXXX 1194 resolv-retry infinite nobind persist-key persist-tun remote-cert-tls server auth SHA512 cipher AES-256-CBC ignore-unknown-option block-outside-dns verb 3 <ca> -----BEGIN CERTIFICATE----- XXXXXXX -----END CERTIFICATE----- </ca> <cert> -----BEGIN CERTIFICATE----- XXXXXX -----END CERTIFICATE----- </cert> <key> -----BEGIN PRIVATE KEY----- XXXXXX -----END PRIVATE KEY----- </key> <tls-crypt> -----BEGIN OpenVPN Static key V1----- XXXXXX -----END OpenVPN Static key V1----- </tls-crypt> the parts marked with ’X’ are filled with the correct private data in my configuration. Whenever I start this config this is what the cli returns: Sun Dec 5 22:22:41 2021 OpenVPN 2.4.7 x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jul 19 2021 Sun Dec 5 22:22:41 2021 library versions: OpenSSL 1.1.1f 31 Mar 2020, LZO 2.10 Sun Dec 5 22:22:41 2021 Outgoing Control Channel Encryption: Cipher 'AES-256-CTR' initialized with 256 bit key Sun Dec 5 22:22:41 2021 Outgoing Control Channel Encryption: Using 256 bit message hash 'SHA256' for HMAC authentication Sun Dec 5 22:22:41 2021 Incoming Control Channel Encryption: Cipher 'AES-256-CTR' initialized with 256 bit key Sun Dec 5 22:22:41 2021 Incoming Control Channel Encryption: Using 256 bit message hash 'SHA256' for HMAC authentication Sun Dec 5 22:22:41 2021 TCP/UDP: Preserving recently used remote address: [AF_INET6]XXXXXXXXXX Sun Dec 5 22:22:41 2021 Socket Buffers: R=[212992->212992] S=[212992->212992] Sun Dec 5 22:22:41 2021 UDP link local: (not bound) Sun Dec 5 22:22:41 2021 UDP link remote: [AF_INET6]XXXXXXXXXXXXXX Sun Dec 5 22:23:41 2021 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) Sun Dec 5 22:23:41 2021 TLS Error: TLS handshake failed Sun Dec 5 22:23:41 2021 SIGUSR1[soft,tls-error] received, process restarting Sun Dec 5 22:23:41 2021 Restart pause, 5 second(s) Sun Dec 5 22:23:46 2021 TCP/UDP: Preserving recently used remote address: [AF_INET]XXXXXXXXXX Sun Dec 5 22:23:46 2021 Socket Buffers: R=[212992->212992] S=[212992->212992] Sun Dec 5 22:23:46 2021 UDP link local: (not bound) Sun Dec 5 22:23:46 2021 UDP link remote: [AF_INET]XXXXXXXXXXX Sun Dec 5 22:23:46 2021 TLS: Initial packet from [AF_INET]XXXXXXXXXX Sun Dec 5 22:23:46 2021 VERIFY OK: depth=1, CN=ChangeMe Sun Dec 5 22:23:46 2021 VERIFY KU OK Sun Dec 5 22:23:46 2021 Validating certificate extended key usage Sun Dec 5 22:23:46 2021 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication Sun Dec 5 22:23:46 2021 VERIFY EKU OK Sun Dec 5 22:23:46 2021 VERIFY OK: depth=0, CN=server Sun Dec 5 22:23:46 2021 Control Channel: TLSv1.3, cipher TLSv1.3 TLS_AES_256_GCM_SHA384, 2048 bit RSA Sun Dec 5 22:23:46 2021 [server] Peer Connection Initiated with [AF_INET]XXXXXXXXX Sun Dec 5 22:23:47 2021 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Sun Dec 5 22:23:47 2021 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 ipv6 bypass-dhcp,dhcp-option DNS XXXX tun 6,route-gateway 10.8.0.1,topology subnet,ping 10,ping-restart 120,ifconfig-ipv6 fddd:1194:1194:1194::1003/64 fddd:1194:1194:1194::1,ifconfig 10.8.0.5 255.255.255.0,peer-id 0,cipher AES-256-GCM' Sun Dec 5 22:23:47 2021 OPTIONS IMPORT: timers and/or timeouts modified Sun Dec 5 22:23:47 2021 OPTIONS IMPORT: --ifconfig/up options modified Sun Dec 5 22:23:47 2021 OPTIONS IMPORT: route options modified Sun Dec 5 22:23:47 2021 OPTIONS IMPORT: route-related options modified Sun Dec 5 22:23:47 2021 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Sun Dec 5 22:23:47 2021 OPTIONS IMPORT: peer-id set Sun Dec 5 22:23:47 2021 OPTIONS IMPORT: adjusting link_mtu to 1624 Sun Dec 5 22:23:47 2021 OPTIONS IMPORT: data channel crypto options modified Sun Dec 5 22:23:47 2021 Data Channel: using negotiated cipher 'AES-256-GCM' Sun Dec 5 22:23:47 2021 Outgoing Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key Sun Dec 5 22:23:47 2021 Incoming Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key Sun Dec 5 22:23:47 2021 ROUTE_GATEWAY 192.168.178.1/255.255.255.0 IFACE=wlo1 HWADDR=XXXXXXXXXX Sun Dec 5 22:23:47 2021 GDG6: remote_host_ipv6=n/a Sun Dec 5 22:23:47 2021 ROUTE6_GATEWAY XXXXXXXXX IFACE=wlo1 Sun Dec 5 22:23:47 2021 TUN/TAP device tun0 opened Sun Dec 5 22:23:47 2021 TUN/TAP TX queue length set to 100 Sun Dec 5 22:23:47 2021 /sbin/ip link set dev tun0 up mtu 1500 Sun Dec 5 22:23:47 2021 /sbin/ip addr add dev tun0 10.8.0.5/24 broadcast 10.8.0.255 Sun Dec 5 22:23:47 2021 /sbin/ip -6 addr add XXXXXXXXXXXXXXXXXXXXXXXXXXXX dev tun0 Sun Dec 5 22:23:47 2021 /sbin/ip route add XXXXXXXXXXXXXXXX via 192.168.178.1 Sun Dec 5 22:23:47 2021 /sbin/ip route add 0.0.0.0/1 via 10.8.0.1 Sun Dec 5 22:23:47 2021 /sbin/ip route add 128.0.0.0/1 via 10.8.0.1 Sun Dec 5 22:23:47 2021 add_route_ipv6(::/3 -> XXXXXXXXXXXXXXXXXXXXXX metric -1) dev tun0 Sun Dec 5 22:23:47 2021 /sbin/ip -6 route add ::/3 dev tun0 Sun Dec 5 22:23:47 2021 add_route_ipv6(2000::/4 -> XXXXXXXXXXXXXXXXXXXXXX metric -1) dev tun0 Sun Dec 5 22:23:47 2021 /sbin/ip -6 route add 2000::/4 dev tun0 Sun Dec 5 22:23:47 2021 add_route_ipv6(3000::/4 -> XXXXXXXXXXXXXXXXXXXXXX metric -1) dev tun0 Sun Dec 5 22:23:47 2021 /sbin/ip -6 route add 3000::/4 dev tun0 Sun Dec 5 22:23:47 2021 add_route_ipv6(fc00::/7 -> XXXXXXXXXXXXXXXXXXXXXX metric -1) dev tun0 Sun Dec 5 22:23:47 2021 /sbin/ip -6 route add fc00::/7 dev tun0 Sun Dec 5 22:23:47 2021 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this Sun Dec 5 22:23:47 2021 Initialization Sequence Completed again, the parts with ’XXX’ have the correct data in my real world return. Any help in getting those errors out is appreciated. Side note: when I change the config from udp to tcp it doesn’t work anymore. Router firewall and so on have neccessary ports open.

Hi everyone, I am using Mozilla Thudnerbird on multiple devices (two desktop PCs and two notebooks). Since I have a lot of E-Mail traffic I have over 30 filters that sort everything that comes in to folders that exist in my IMAP account (so I can see these folders and their content on every device). However there is a problem that when I want to modify one of my filters (add a new email adress or keyword as an example) I always have to do that on 4 devices. Otherwise (if I would only modify the filter on pc1 for example) my new Filters or changes of filters don't work on my other machines (obviously). So can anyone think of an easier way than editing 4 filters on 4 machines every time? Unfortunately my E-Mail provider doesn't support filters on server side (wich would sort emails before they even arrive in Thunderbird) so filtering them in Thunderbird is kind of my only option. Thanks in advance

Thank you those are some valid points that I didn't really think about.

The webserver is only meant to be hostet locally and the .py scripts simply change what list a ceratin program that is on the same machine as the webserver should use. I want this 'seeting' (meaning: changing the used list for program x) to be accessible for every user on my local network, so that lets say my wife, could click button 'List A' which would trigger script A, which would make program x use list A and vice versa.

When you take a closer look at the adapter does it say anything about the manufacturer or similar information that would indicate that the driver is properly installed?

Hello everyone, I am trying to create my first php site (locally) that should have two buttons that each execute a python script when clicked. Since I ahven't really worked with php yet I don't really know where to start here. I already have the php script active that prints out the current time and is available over the local ip so I already know how to do that Any help is appreciated Thanks in advance

I personally wouldn't go for a data center one (noise obv, as you mentioned) I think those are just too big of a form factor to use with a NAS. Go for something more home user oriented, noise and size wise.

QNAP QSW-M408S would be a cheap solution for what you want, 4 10 Gigabit SFP+ Ports, 8 Gigabit RJ45 Ports.

I am trying to "force" traffic of my network over a raspberry running pi hole to filter it with blacklists. So yeah the idea is to use this on networks with permission only, don't worry If I understand that correctly, this "only" finds the standard gateway right? So I still don't really know how I could start Ettercap from a python script.

Hi everyone, as the title already says I am trying to use python to start and configure Ettercap. So my plan is to have a script that first scans for the ipv4 of the router and then start ettercap to spoof and/or log /and/or filter all the traffic that is coming to the router from the various clients. I am still at the very beginning of learning Python so I am not really sure what approach I should take for this. Every help or hint is appreciated.

specifying it with python3 did the trick. Thank you!